Replacement Door Hinge For A 1992 Skyline Nomad Travel Trailer
Who sales them why is it so hard to find, I have a 92 skyline nomad , can not find door replacement LH hinges , rectangle 2by72 | With your trailer being 30 years old most parts are discontinued at this point so a lot of troubleshooting and...
Does 3" Wide Continuous Hinge # MA75VR Have Holes Pre-Drilled
Does it come with pre drilled holes? | The 3" Wide Continuous Hinge # MA75VR that you referenced does not come with holed drilled. We do not have any similar options that are pre-drilled. |
Does The Marlboro Continuous Hinge Come With Pre-Drilled Mounting Holes
The 72” continuous piano hinge you have for enclosed trailer that is 4 inches wide. Does it have the holes pre drilled in for mounting? | The 4" Wide Continuous Hinge - 6' Long - 3/8" Pin Diameter - Steel # MA85VR does not come with pre-drilled...
How is Pin of Trailer Barrel Hinge Secured
How is the pin retained? | Barrel hinges like the Weld-On Barrel Hinge with Grease Zerk # MA29ZR can be installed in two ways. One where the hinges face the same direction which allows the door to be lifted off the hinges if ever needed and...
Does Marlboro Weld on Hinge Have Weight Capacity
I was looking to weld on 2- MA59ZR 10 hinges and was wanted to know what the weight capacity they can support? Thank You | Marlboro does not list weight capacities for the # MA59ZR that you referenced. They state it will be up to the installer...
Recommendations for a Transition Hinge for a Cargo Trailer Ramp
do you carry a cargo trailer ramp gap transition hinge? | The best hinge we have for your application is the 6" Wide Continuous Hinge - 1/2" Pin Diameter - Steel # MA32VR (8' long) or the # MA52VR (6' long). Since both of these hinges measure...
Can 3" Wide Continuous Hinge # MA75VR be Shortened
Can I shorten this hinge? | Yes, if you wanted to cut down the 3" Wide Continuous Hinge # MA75VR to shorten it you certainly could. |
Solution for Needing Replacement RV Cargo Door Hinge
Looking for cargo door hinges, for Coachman Chaparral 2017 model M-381 RD , thank you! | Usually RV cargo door hinges are piano style hinges that are between 3 and 4 feet like the part # MA85VR which is 4 foot long. This could also be trimmed...
What Lengths Are The Marlboro 6" Wide Continuous Hinge Available In?
Do you sell something similar that is shorter? I only need one that is like 13 inches long. | The 6" Wide Continuous Hinge we currently only carry in a 6' # MA52VR and 8' # MA32VR length. The 6' length is the shortest piano style hinge we carry...
Do Marlboro Piano Hinges Have Weight Capacity
I need to know the load limit or weight bearing in pounds for 2 different continous steel hinges. Ma75vr Ma45vr Also do you have sane time of these hinges in 3 feet length? If the 3 feet length is available what are the part numbers and weight...
Hinge for Folding Nose of Trailer
Hello, I would like assistance in ing the appropriate hinge for my application. The application is we have a 200+ lb metal cover, which will be used to protect equipment. The only support the hinges have are the front lip of the trailer, where...
Weight Rating of Butt Hinge w/ Non-Removable Pin MA87ZR
What is the suggested weight limit that this product can handle? | The Butt Hinge w/ Non-Removable Pin, # MA87ZR does not have a weight rating. |
What Is the Weight Capacity of the Weld-On Hinge w/ Brass Bushing and Grease Zerk
What are the weight specs for this hinge? Want to support a wooden barn door. Door will be approx 10 feet high by 6 feet wide. Door could be approximately 400 - 500 lbs I intend to use 3 hinges Can send pictures of intended hinge design tonight...
How To Pick Out the Correct Replacement Piano Hinge for a Cargo Ramp Door
Looking for a heavy-duty piano hinge for a cargo trailer door ramp. 58-60 in length. Thank you | The main factor in choosing the correct replacement piano hinge is pin diameter which then in turn, denotes capacity. The hinge width and material...
Weight Rating for Weld-On Hinge w/ Brass Bushing and Grease Zerk
What is the recommended weight that this hinge can handle? | I reached out to Marlboro Manufacturing and found that the load carrying capacity of the Weld-On Hinge w/ Brass Bushing and Grease Zerk # MA89ZR is 576 lbs. |
Is there A Weight Capacity for the Marlboro Continuous Piano Hinge
What is the weight limit on these hinges? Looking to make a hinged queen size murphy type bed in our cargo trailer. | Marlboro piano hinges like the 3" Wide Continuous Hinge # MA74ZR you're looking at do no have weight capacities. Marlboro mentions...
Replacement Hinge for Storage Door
I am looking for a replacement hinge for my storage door for my 2019 Forest River, Sandpiper 384QBOK 5th wheel ? | I would be happy to help you but I do not have any way of knowing what hinge is currently on your 2019 Forest River Sandpiper....
Weight Capacity Of Marlboro Continuous Piano Hinge
How much weight can this support and can it come in 8foot | Hinges like the 6" Wide Continuous Hinge - 6' Long - 1/2" Pin Diameter - Steel # MA52VR do not have weight capacity ratings and it is up to the installer to determine if it will be...
Can The Marlboro Continuous Hinge # MA74ZR Be Cut Down To Size
I need 19 hinges 36” long. Can these hinges be cut in half to make two hinges? | Yes, the 3" Wide Continuous Hinge - 6' Long - 1/4" Pin Diameter - Aluminum # MA74ZR can be cut down to fit your needs. I just recommend first removing the pin and...
Can The Marlboro Continuous Hinge Be Cut Down To Fit A Palomino Pop-Up Truck Bed Camper Door
I need a 50 door hinge for my Palomino pop up truck camper. Would I be able to cut your 72 aluminum door hinge to the required length? | Yes, if you wanted to cut down the Marlboro Continuous Hinge # MA64ZR you would want to first remove the...
Weight Capacity of Weld-On Hinge w/ Brass Bushing and Grease Zerk
can you tell me what weight these hinges are rated for? Weld-On Hinge w/ Brass Bushing and Grease Zerk - Steel - 3-3/16inch Long - 5/16inch Pin Diameter Item # MA39ZR | The weight capacity of the Weld-On Hinge w/ Brass Bushing and Grease Zerk...
Marlboro Manufacturing Continuous Hinge Material Type
Is the pinfoot also aluminum meaning that the entire hinge is made of aluminum. The intended application will be exterior and I need to avoid pins or any part of the hinge that will rust. Currently have installed a hinge not from Etrailer...
Can the 4" Wide Continuous Hinge MA85VR Be Cut To a Different Length?
Can this hinge be shortened? And would this be suitable to be used for a ramp door extension or would there be a better product? | Yes, the 6' Long, 4" Wide Continuous Hinge # MA85VR can be cut down to the length needed. It is a 270 degree...
Is There A 4' Long x 6" Wide Continuous Hinge With A 1/2" Pin Size Available
I need a 4’ hinge x 6” , 1/2” pin. Do you have that or do I need to buy a 6’ hinge and cut it down? Thanks | We do not currently carry a continuous hinge in a 4' length so you would need to get the 6" Wide Continuous Hinge - 6' Long - 1/2" Pin...
Filter Your Search
Contact and Help