Adapter For Connecting EZ Connector 14 Pin Trailer Connector To 7-Way Blade Vehicle Conector
Is there an adapter to go to traditional 7way when using a vehicle without mag plug? | The EZ Connector Magnetic 14-Pin Trailer Connector # 319-S14-07-6 will fit inside the Trailer Connector Adapter # EZ94ZR and plug into a truck with a 7-way...
Does the EZ Connector Magnetic 14-Pin Trailer Connector Have a Twist Lock Also
We change large Dies out of our presses and we use 12 pin cables that we connect by screwing them onto DIe. We were thinking we could use your product to eliminate the problem we have with Operators forgetting to unplug Die cable and it getting...
Replacement 7-Way Trailer Connector for a 1999 Dodge Ram 3500
I have to replace the 7 blade plug on my truck. I looked at the Hopkins 42145 but noticed the plug that goes into the factory harness only has 7 pins while the harness has 8. Im not sure whether one of the pins is just a dummy used for alignment...
7-Way Wiring for 1997 Dodge Ram 2500 Extended Cab 4WD
My existing 7 pole connector has two separate wiring harness connections. One with 4 blades and the other has 3. I have been having a difficult time finding a replacement that matches. It appears that part#319-R7-02D has two separate connectors...
Recommended Magnetic EZ Trailer Connector for Trunk and Gooseneck Trailer
I am looking to add a 7-way receptacle in the bed of my truck, recently purchased a used gooseneck and was going to replace the 7-way on the trailer as well. I am intrigued by the magnetic connectors. Is there a kit haven’t found it if so that...
Parts Needed to Add EZ Connector Style 7-Way to 2012 F350
I have a 2012 Ford F350 with towing package. The bumper connections include a 7-way RV connector and a 4-pin connector. Id like to install the EZ Connector on my truck and trailer, while keeping the factory connectors fully functional. Ive...
EZ Connector With Enough Pins for Pro Trailer Backup Assist on 2022 Ford F-350 Super Duty
I have a 2022 F350 King Ranch dually with pro trailer backup assist plug below the 7 pin trailer connection. Is there a EZ connect 7 pin adapter that will fit ? I can send pictures of the plug that is there now. | Thanks for reaching out! From...
What All is Needed to Add an EZ Connector to a 2012 Expedition and Trailer?
Vehicle- 2012 Ford Expedition EL Trailer- 2010 Interstate 16 foot enclosed I currently have the Adapter 4-Pole to 7-Pole and 4-Pole - 37185inch installed. I want to convert my 16 foot enclosed trailer and vehicle to the EZ Connector Magnetic...
If Trailer Wiring Pre-Wiring is on 2006 Chevy Express is Wiring Active
I have a Chevy Express 2006 3500. Is it possible to look at the wiring next to the jack and know if it is prewired for 7 prong trailer connector? | Hey John, if the wiring is there I would be shocked if the circuits aren't active but what you...
Wire Gauge of EZ Connector Magnetic 14-Pin Trailer Connector
I need to know what gauge wire or within this cable and where they all the same gauge often times will be 2 to 4 heavier gauge wires within the cable | I verified with the manufacturer that 16 gauge wire is used for each wire of the EZ Connector...
Is Extra Bracket Needed to Install EZ Connector Magnetic 7-Way # 319-R7-02 on a 2012 Ram 1500
In the video describing the install for the EZ Magnetic connector kit #319-r7-02 it says to use the short bracketinch to make this a no drill install. I notice that E-Trailer has the Curt Long Bracket available, is this the correct bracket to...
How to Keep From Damaging Electrical Connection Between Lance Truck Bed Camper and 2019 Ford F-350
I have a 2019 F350 and a 2020 Lance 1172 in-bed truck camper. The camper has a proprietary Lance connector, so when I bought it, they installed the mating proprietary Lance truck-side connector up near the front of the bed of the truck. The...
Parts Needed To Connect Lights From A Removable Trailer Extension To A 5th Wheel
My 5th wheel has factory LED taillights with the 3 wire red-black-white system. I am adding a trailer extension and want to install taillights that duplicate the 5th wheel lights. I assume I should buy and install a pair of 3 wire LED taillights...
Could EZ Connector Pogo Cable Holder Help with Fifth Wheel Wiring that Breaks around Corners
Does this product work on 5th wheel trailors Trailor Harness breaks on sharp turns | The EZ Connector Pogo Trailer Cable Holder # 319-TCP011602 that you referenced can be installed on fifth wheel trailers like what you have but if you are...
Does The EZ Connector Work On The 2017 Ford F-350?
Does the EZ Connector work on the 2017 f350. Site keeps saying the product doesn’t fit my vehicle. | Hello Tim. So, the EZ Connector Magnetic 7-Way Trailer Connectors # 319-R7-02 are designed to be universal. It will work on virtually any vehicle...
Wire Gauge Of EZ Connector Magnetic 14-Pin Trailer Connector 319-S14-05-6
Is this truly wired with 16 gauge across the board? Id be interested in using it to replace the 7 pin connector I have on my truck and trailer now, but the current connector has a mix 14, 12, and 10 gauge wiring which I believe is standard to...
Recommended Universal 7-Way Wiring Harness for a 1983 Ford F-250
I have an old 83 f250. It has a 7 pin trailer connector on it. The wiring harness behind the connector that sits in the middle of the tail lights to front of the truck is corroded and in need of replacement. I am hoping you have access to this...
What Brake Controller Works for a 2020 Toyota Tundra?
Im looking to replace the factory installed brake controller in my 2020 Tundra. I dont see any aftermarket options ta fit the tundra later than 2019. What are my options? | I have a solution for you but there is a computer issue with the...
Troubleshooting A 2013 Ford F-250 That Has A Trailer Disconnected Error Message
My 2013 F250 has recently started displaying the trailer disconnected message. All lights on the trailer work including the brake lights. However when I test the brakes with the built in brake controller I have no brakes. It does this on every...
7-Way Trailer Connector Tab Wont Line Up with Notch on Receptacle
I have a brand new seven pin epi-cable and a brand new 2022 coachman clipper camper. When you plug the harness into the receptacle… The small tab that will hold the cable in place is not lining up properly with the plug. You cannot push the...
Recommendation for Extending Trailer-End Cable Included with EZ Connector Magnetic 7-Way Kit
The new sealed magnetic trailer plug, item # 319-R7-01, do you have one of these with a 6foot trailer plug length? The truck side is long enough, but my trailer tongue is 5, so a 4foot wont reach. | The EZ Connector Magnetic 7-Way Trailer Connectors...
Can Same 7-Way Connector Be Used for Towing Air Brake and Electric Brake Trailers
I have a 2006 sterling 9500 tandem axle truck with air brakes and pintle hitch. Is there a way to wire this 7 way to operate both an abs air brake trailer, as well as an electric brake trailer with the same plug? Or would that require 2 seperate...
What Replacement Mounting Bracket do I Need for My 7-Way Vehicle Plug?
I need to replace the mount for the connector between the trailer and my 2016 Nissan Frontier wiring harness. I attached a photo. | Thanks for the photos! For a great replacement bracket, I recommend the EZ Connector Mounting Bracket for 7-Way...
Is EZ Connector Magnetic Extension Cord w/ 7-Way Trailer Connectors # 319-S7-26 Coiled or Straight
Hi, Im wondering if this cable is coiled as shown on your pictures, or straight as shown at the EZconnector website? Thanks | The EZ Connector Magnetic Extension Cord w/ 7-Way Trailer Connectors # 319-S7-26 that you referenced comes with coiled...
Filter Your Search
Contact and Help