Correct Size Bolt for Dexter Axle 2K Double Eye Leaf Spring
what is the ID of the bushing ? | The Dexter Axle Double Eye Leaf Spring part # 072-017-00 is designed to be used with a standard 9/16" diameter shackle bolt like part # 166081 so that is the inner diameter of the bushing which is included. |
Bolt Recommendations for a Equalizer for 2 inch Slipper Springs
Looking at the TREQ 1344 equalizer. Its a homemade trailer and the equalizers are wore out. The holes are wore out. So the TREQ seems to be the right one. I need the bolts and a center bolt with the grease fitting. | For the Equalizer for 2...
Recommended Torque Specs for 9/16 and 1/2 Inch Trailer Suspension Hardware
I am installing new springs bolts , shackels and u bolts on 5200lb tandem axles could you please tell me the recamended torque specs on the bolts and U bolts please and also if you recommend locktite to be used if locking nuts are not being...
Availability of Electric Drum Brake Assemblies Like # 23-468 Without Integrated Mounting Bolts
I want to purchase the Nev-R-Adjust Electric Brake Assemblys. Two LH 23-468 an two 23-469 RH. I would like to know if there is an alternative mounting bolt other than the ones that come with them? Upon removing backing plates, the bolt/nut usually...
Shackle Straps Break on a 20ft Tandem Axle Trailer and the Rear Axle Slides the Tires
I have a lawn service trailer. It is approxmently 20 ft. with two 6500 lb. axles. My problem is the rear shackles keep breaking. Ive noticed in tight cornering the rear axle is sliding the tires. What is the proper repair for this situation?...
12 Inch Long Equalizer For 2 Inch Slipper Springs & 8,000 lb U-Bolts For Tandem Axle Trailer
Hi I have a 36’ trailer with 8k tandem axles and I’m looking for a 12” equalizer and hardware kit along with new u-bolts. Do you have a kit or do I need to purchase individually? Thanks | There isn't a complete kit, but I can go ahead and...
3-Leaf Double-Eye Spring for 2,000-lb Trailer Axles Shackle Bolt Diameter
What is the size of the center bolt in your leaf springs? I need to have a custom axle built to mate up with your springs SP-169275. I know the holes in the spring seat is 11/16, but I dont know the size of the bolt head or nut that will fit...
Replacement Locknuts For The Roadmaster Anti-Sway Bars On A 2011 Forest River Georgetown MH
I am missing one of the nuts for the sway bar bracket, do you sell this part also so I may purchase a replacement. Thank you for your assistance. | I was able to track down some possible solutions for you! I went ahead and checked out the Roadmaster...
Correct Nut to Use For Step Bolt For Double Eye Springs ABS34FR
Which nuts to use on 7/16-20 step bolt? Im using the ABS34FR to replace my step bolts for my springs and shackles. Is either of the the flange nuts 006-092-01 or LC122103 a locking nut? Do I need a locking nut? I have some regular grade 5 flange...
Trailer Suspension Kit and 6 Inch Long Equalizers for Tandem Axles and Double Eye Springs
I am looking for a kit that includes the 6inch equalizers 9/16inch diameter TREQ310 need 2, the 2 5/8inch shackles 8, the 3inch shackle bolts 9/16inch diameter 14 and 14 lock nuts. I looked and found a kit AP233 but was unable to find a kit...
Recommended Bolt On Hangers For Aluminum Frame Trailer
I am looking for a bolt on spring hanger kit for a aluminum trailer. The frame is being made out of aluminum box tube . I am going to use a 3000lb axle kit. | Since you've got an aluminum frame trailer, I understand why you're looking for a...
How Is the Shackle Bolt with Locknut for Double-Eye Springs 166081 Measured
is the length of the bolt counting the head or just the shaft length? Thanks | The length of the Shackle Bolt with Locknut for Double-Eye Springs part # 166081 does not include the bolt head, just the shaft. I have attached a photo below. |
Do the Equalizers in Tandem-Axle Trailer Hanger Kit # APT5 Come with Bushings in Place
Do the equalizers come with bushings? | Yes, the equalizers included in the referenced Tandem-Axle Trailer Hanger Kit # APT5 do come with nylon shackle bolt bushings already in place. These accept 9/16-inch diameter shackle bolts such as # 166081. I...
Is There A Torque Specification For Spring Eye Bolts?
hello, what is the torq specification are you applied torq under which spec? | If you are referring to the torque specification for the spring eye bolt, there is not a torque spec for this bolt. The general rule is to tighten the nut for the...
Replacement 30" Long Slipper Spring for Boat Trailer
Hello! Question about boat trailer leaf springs. Have a single axle trailer with leaf springs that are 30 long by 1.75 wide with a single eye. Springs each have 4 leafs. Not sure what the axle weight is. Its galv 2 wide by 2.5 high. Need...
Hangers, Bolts, and U-bolts For 3 Inch Axle and Jeep Leaf Springs
cant seem to find the parts I am looking for and need some assistance. I have 2.5 inch leaf springs off of a jeep, I need the hangers for the front which will be U shaped 1/4 inch steel and the rear has a shackle, so just need a plate to weld...
Hi guys, theres a flat washer in my trailer bearing pack Im not sure exactly where it goes it looks like it goes somewhere with the inner bearing is it between the bearing and the seal, any ideas please | I was unable to find an order number...
Availability of 7/16" Conical Tooth Washer
Do you sell 7/16 conical toothed washers? I need 4, thanks! | The 3/8" Conical Tooth Washer # 01292006-020-01 is the closest we have to a 7/16" inner diameter. We have the 7/16" Lock Washer # 5-8 depending on if your application will work with...
Recommended Self Adjusting Brakes for 2014 Keystone Laredo 5W Travel Trailer
Need to replace the dexter brakes I have on my fifth wheel TT. Below is the part # the right hand set. I’d like self adjusting thanks Dexter backing plate part #023-463-00 | Based on your Dexter brake assembly information, it looks like you've...
Recommended Nut and Washer for Use with the Brake Mounting Flange part # 4-44-1
i need the nuts for the 3inch axle mount 5 stud brake mounting flange. what is the number or do you have them. also you should have relative parts listed so we can find them or even be reminded to buy them. Oh and do I need washers too? |...
What is the Overall Length of 3-Inch Suspension Bolts for Shackle Links
my bolts are 3 1/4inch end to end. are your 3inch bolts the same? and the old shackle links have an oblong hole on one end. is that from wear? do i need the wet bolts? | I went to our warehouse to pull each bolt and the length of 3-inch bolts...
Replacement For 25-1/2 Inch Leaf Springs on Boat Trailer
I have a venture boat trailer with a 2 3/8 dia axle. It has four leaf spring at 25 1/2” c to c. Can you please advise the part number of the springs and the 3” bolts and nuts I need. Thanks | Leaf springs flatten out over time, so since yours...
Replacement Galvanized Trailer Idler Hub For a Continental EC39 Boat Trailer
Good afternoon, I was wondering if someone could help me out in choosing the correct galvanized, 5 bolt hub assembly for a Continental EC39-900 small boat trailer. The axle weight rating is 1150 lbs. I am not sure of the bearing numbers or...
Recommended Replacement Hydraulic Drum Brakes for Tandem Axle Trailer
I have two 2500 lb axles on my boat trailer. The diameter of the axle is 2 inches. Bolt pattern is 4. drum diameter is 10. 14 inch tires. I dont find brake assemblies with this criteria in your inventory. Should I just use those listed in the...
Filter Your Search
Contact and Help