Replacement Galvanized Trailer Idler Hub For a Continental EC39 Boat Trailer

Products Featured in This Question

Trailer Idler Hub Assembly for 2,000-lb Axles - 5 on 4-1/2 - Galvanized

(477)

$54.45

Cotter Pin - 1/8" Thick x 1-3/4" Long

(766)

$1.12

Trailer Spindle Nut 1"

(426)

$11.81

Double Lip Grease Seal - ID 1.249" / OD 1.983" - Qty 1

(609)

$5.34

Bearing Buddy Bearing Protectors - Model 1980A-SS w/ Auto Check - Stainless Steel (Pair)

(1468)

$37.94

Washer For 1" Spindle

(311)

$5.30

Question:

Good afternoon, I was wondering if someone could help me out in choosing the correct galvanized, 5 bolt hub assembly for a Continental EC39-900 small boat trailer. The axle weight rating is 1150 lbs. I am not sure of the bearing numbers or seal size. Thanks a lot

asked by: Eddie S

Expert Reply:

Your Continental EC-39 Boat Trailer will need a Trailer Idler Hub Assembly # AKIHUB-545-2-G-2K. I was able to confirm with Continental that you have a spindle that uses 1.063" bearings on a straight spindle with a 1.249" ID grease seal. You will need to replace the grease seal that comes with the kit with a Double Lip Grease Seal # 34823.

If your Cotter Pin # 165649, Washer # SW1000, or Spindle Nut # 165686 are damaged or missing we have those items available for replacement as well.

Since your spindle is not an EZ lube design you can add the Bearing Buddy # BB1980A-SS so that you can easily add grease to your hub to fill the chamber. The stainless steel construction ensures that it will last and the Auto Check feature helps to prevent you from damaging the grease seal on the hub.