Is There A Torque Specification For Spring Eye Bolts?
Published 09/08/2023
Products Featured in This Question
Question:
hello, what is the torq specification are you applied torq under which spec?
asked by: Rubb
0
Expert Reply:
If you are referring to the torque specification for the spring eye bolt, there is not a torque spec for this bolt. The general rule is to tighten the nut for the bolt until good and tight, but not too tight to where it will bind the spring. If the nut is too tight it will cause the suspension to bind. You can use the bolt # 9163B and lock nut # TRFA916DLNZ for a 2" wide leaf spring like the # e39SR
expert reply by:
Jesse M
0
Product Page this Question was Asked From
6-Leaf Slipper Spring w/ Hook End for 8,000-lb Trailer Axles - 29-1/2" Long
- Trailer Leaf Springs
- Slipper Springs
- 9/16 Inch Eye
- Nylon Bushings
- 8000 lbs
- 2 Inch Wide
- 6 Leaf
- 29-1/2 Inch Long
- Standard Grade
- etrailer
more information >
Continue Researching
- Search Results: trailer hubs and drums accessories and parts
- Shop: Shackle Bolt For Double-Eye Springs - 9/16" Diameter - Plain - 3" Long
- Shop: Locknut for Trailer Shackle Bolt - 9/16" Diameter
- Shop: Dexter Bronze Bushings - Qty 4
- Shop: MORryde X-Factor Crossmember for Standard Frame Hangers
- Shop: Step Bolt For Double Eye Springs - 9/16" Diameter - Plain - 3" Long
- Shop: Dexter Trailer Axle w/ Electric Brakes - E-Z Lube - 8 on 6-1/2 Bolt Pattern - 94" - 7,000 lbs
- Shop: Dexter Electric Trailer Brakes - 12" - Left/Right Hand Assemblies - 7,000 lbs
- Video: MORryde X-Factor Crossmember Installation - 2020 Grand Design Momentum 5W Toy Hauler
- Video: 4-Leaf Double-Eye Spring for 4,000-lb Trailer Axles Spec Review
- Q&A: Should Trailer Suspension Shackle Bolts Be Torqued
- Q&A: How Tight Should Shackle Bolts Be Tightened On Trailer
- Q&A: Proper Torque for Shackle Bolt for 1-3/4" Wide Double Eye Springs 007-003-01
- Shop: Suspension Enhancement
- Video: Breaking Down the Grease Cap, 1.988" OD Drive In
- Video: Detailed Breakdown of the Locknut for Trailer Shackle Bolt
- Search Results: 14125a bearing
- Search Results: trailer brake kit
- Search Results: 235/80/16
- Search Results: bearing kit
- Q&A: Replacement Bushing Recommendation for a Equalizer for 2
- Q&A: Raising Height of Gooseneck Trailer with Slipper Spring Suspension
- Q&A: Where Does the Clip on Leaf Spring Need to be Facing When for Installation
- Search Results: leaf springs
- Search Results: gooseneck trailer trailer jack
- Q&A: Replacement, Heavier Duty 26 Inch Leaf Spring For 4,400 lb Axles
- Video: Complete Breakdown of the U-Bolt Kit for Mounting 5,200-lb to 7,000-lb, Round Trailer Axles
- Video: Hands-On with the SumoSprings Trailer Helper Springs w/ Line Relocation Bracket
- Video: Review of TruRyde Trailer Leaf Springs - Double Eye Springs - TRU62FR