What Is the Weight of the RoadMaster Tow Dolly and What is Coupler Height
Hi, The shipping weigth says 149lbs. then specs says Actual weight 750lbs. Is this really that heavy? Some flat car trailers with dual axle and brakes are 800-900lbs. What is actual weight of that dolly? Also what is range of coupler height?...
Restoring Weld Nuts to Install a Trailer Hitch for 1997 Nissan Pathfinder
Hi, just bought a used 1997 Nissan Pathfinder and need to put ahitch on it. i took it to u-haul where I was to pay for the hitch and installation. When I got there the guys at the tregister not mechanics said the bolts were too rusty and sent...
5th Wheel Installation with a Bedliner in a 1997 Ford F-150 Or F-250 Light Duty
is it ok to cut out the plastic bed liner to fit the brakets | Yes, you must cut out a space in drop-in plastic liners when installing fifth-wheel rails in the bed of the pickup. This is one of the first steps in the installation instructions,...
Nerf Bars with Single Pad that Fit 1997 Chevy 3/4 Ton with Extended Cab
I need a nerf bar for a 1997, Extended Cab, Chev 3/4 ton, two door with no third door. Will this nerf bar #25-0635 work on that pickup.. I want a bar that only has one step pad on each bar... two steps per bar will not work. Thank you...
Can Trailer Hitch Receiver Be Installed on 1997 Chevy Blazer LS With Swing Away Spare Tire
Can a ball trailer hitch be installed on a 1997 Chevy Blazer LS with a swing away spare tire mounted on rear gate | Yes, the Curt Trailer Hitch Receiver # C13020 can be installed on your 1997 Chevy Blazer LS. The swing away spare tire will not...
Suspension Enhancement Recommendation for a 1997 Honda CR-V
Hello there, I was wondering if these sumo spring helpers will fit on my 1997 honda CRV? | The SumoSprings part # CSS-1069R that you referenced have been confirmed as a fit for your 1997 Honda CR-V and would work well for you. |
Is the Glass of the Longview Custom Towing Mirrors # CTM2200A Convex or Flat
I would order these mirrors if they are flat glass and not convex which distorts the distance. I want them to see exactly how far back cars are since I dont have use of my inside rear view mirror. | The mirror surfaces that are on the Longview...
Flat Towing My 2011 Ford Flex SEL
I bought a 2007 Monaco Diplomat 40SKQ and I want to Flat Tow my 2011 Ford Flex SEL depending where Im going. is it possible and what equipment do I need | With etrailer, it's possible. For your 2011 Ford Flex SEL you can use this base plate...
Replacement Rear Bumper Recommendation for a 1997 Dodge Dakota with Access for Lowering Spare
73000 bumper does it have hole for spare tire crank to lower tire | For a replacement bumper for your 1997 Dodge Dakota that would match perfectly to what your truck came with from the factory and would have access for lowering the spare you...
Can the Curt # 31310 be Installed the Same Time as the Snowplow Mounting Brackets # K281517?
Can Custom Fit Hitch # 31310 be installed at the same time with the Custom Mounting Brackets for Detail K2 Snowplows Item # K281517, or would they interfere with each other? This is on a 1997 F-250 Heavy duty 4x4. | I have an answer for you....
7-Way Wiring for 1997 Dodge Ram 2500 Extended Cab 4WD
My existing 7 pole connector has two separate wiring harness connections. One with 4 blades and the other has 3. I have been having a difficult time finding a replacement that matches. It appears that part#319-R7-02D has two separate connectors...
Can I Keep My Spare Tire Mounted With The Curt Trailer Hitch Receiver # 14001 On 1997 Ford F-250
Will i be able to keep my spare tire on my 97 Ford F250 HD extended cab long bed with rear full tank | I contacted our representative at Curt and he informed me that you will be able to keep your spare tire on your 1997 Ford F-250 extended cab...
Installation Instructions for Curt Trailer Hitch 13084 on a 1997 Jeep Cherokee Country Edition
Hi, own a 1997 Cherokee Country edition. I have the weldnut strips in both frame rails. Do I skip the reinforcement block install, and bolt the hitch directly to the weldnuts from under the Jeep? Thanks in advance! | If you are talking about...
Parts Needed To Add A Brake Controller To A 1997 F 250 With A 7-Way But Only The 4-Flat Functions
Hello, I have a1997 Ford f250hd. It had an old 4 pin round connector in it. I replaced it with a7 blade, just the basic 4 wires for lights. I now have a travel trailer with e brakes and need to incorporate the rest of the wires. I do have both...
Recommended Gooseneck Trailer Hitch for Towing with a 1997 Ford F-350 Dually
Yes sir I’m looking into the hot shot I wanna buy a 97 Ford F-350 dually and haven’t seen much or head a lot people use a older truck I wanted to buy older pickup instead of buying a new one and being in debt right away I just don’t know how...
Recommended Tow Bar Wiring Harness For 1997 Jeep TJ
hello I ordered a wiring kit from 2 other places and both were plug and play for 1997 but the connectors were wrong the kit came with square connectors and my jeep has the flat connectors. is this kit flat or square | Thanks for the pictures! The...
Can Derale D16928 be Used as Pusher Fan
D16928. I need to mount this as a supplemental fan in front of the radiator attached to my front bumper brush guard....so theyll be pushers as they be mounted facing same direction but in front of rad So it would be exposed to the elements like...
Replacements for a 20.5 x 8 - 10 Trailer Tire
Have a 1997 Jayco Eagle 12 popup with 10 inch tires,4 bolt. Current tires are Nanco N699 20.5x8-10/E. Purchased August 2017,approx 3700 miles on them. Seems quick to me, but have worn to the extent that they need replacing. Interested in your...
Timbren Rear Suspension Enhancement System Instructions for 1997 Ford F-250- F-350 Heavy Duty
Timbren frtt350e bracket doesn’t fit truck bracket. Can send pictures. Thanks | I am sorry to hear you are having trouble installing the Timbren Rear Suspension Enhancement System item # TFRTT350E on your 1997 F-250 or F-350 Ford Heavy Duty....
Retractable Hard Tonneau Cover That Fits 1997 Chevy C/K Series Stepside With 6-1/2 Foot Bed
Looking to buy a hard retractable cover for my 97 silverado stepside want to buy the right set up point me in the right direction | There are a couple of great options for retractable hard tonneau covers that fit your 1997 Chevy C/K Stepside...
What is the Mounting Hole Pattern for 7-Way Bracket # 18138
What is the bolt pattern for mounting the 7-way socket? | The Draw-Tite bracket for 7-way # 18138 will mount at a right angle with pre-drilled mounting holes. The hole diameter, which will fit the majority of 7-way connectors, is 2-1/16 inches. I...
Air Conditioner Shroud For Coleman Mach Units
I need a replacement schroud for a Coleman 7330-713, any suggestions ? | The part number you listed is a Coleman Mach AC unit so that means that the replacement shroud part # MA00-325001 is the correct shroud replacement. |
Winch Mount Fit For a 1997 Suzuki King Quad 300
Will this winch plate fit a 1997 Suzuki King quad 300 | For your 1997 Suzuki King Quad 300 the Bulldog Winch ATV mount part # BDW15135 that you referenced is a confirmed fit. |
Trailer Wiring Harness for a 1997 Toyota 4Runner
I am looking to replace my factory trailer wiring system which has failed. The Curt #C55341 looks to be identical to what I now have. Please confirm this will replace the factory setup with appropriate connectors etc. Thanks | You can use Curt...
Filter Your Search
Contact and Help