Summer Starts Here - Save up to 70%
Suggested Towing Mirrors for a 2008 Toyota Highlander
What extended mirrors do you have that will fit a 2008 Toyota Highlander Sport for towing a 22 foot travel trailer? | Though we do not have a custom fit option for a 2008, we do have other options available. The K-Source # KS3891-2 has convex...
How to Pick Out Trailer Axle for Older Trailer
Hello, I hope this message finds you well. I am wondering if a Dexter D35 axle would be the correct choice for a 1954 Spartan Royal Mansion 37FT trailer and what would the complete list of items I would need incl electric brakes etc? If not...
Axle Seal Replacement for AL-KO T52 Trailer Axle
I have a keystone camper alko axle t52-3 and need to figure out what axle seal it uses without tearing it all down before hand | Your AL-KO T-52 axle has # 42 spindles that use hub assemblies with a # 25580 inner bearing and # 15123 outer bearing....
What Size Hardware Do Trailer Hitches for 2006 Honda Pilot Use
Hi, What size are the 6 bolts required for a trailer hitch for a 2006 Honda Pilot? Thank you! | The size of the bolts that are used to install hitches on your 2006 Honda Pilot like the Draw Tite # 75599 are M12x1.25 95 mm. We also offer replacement...
Replacement Hardware For Draw-Tite Trailer Hitch Receiver on 2007 Toyota Camry
What size of bolts to mount the hitch on a 2007 Camry? | The Draw-Tite Trailer Hitch Receiver # 36416 for the 2007 Toyota Camry will use the following hardware. Qty. (4) M10 X 40 X 1.25 CL8.8 Hex Bolt Qty. (4) 3/8” Conical Toothed Washer Qty....
Is There a Replacement Bolt Kit for the Curt C11066 Available?
I was wondering if it was possible to get the bolt kit for this trailer hitch, or atleast the list of what size bolts id need to buy | We can definitely get you replacement hardware for the Curt # C11066. The # RHK can be matched to any hitch...
Is There a Class 2 Hitch Available for a 2021 Kia Sorento?
Is there a class 2 hitch that can be safely modified to fit Kia Sorento X-Line AWD 2021? Needed for two light weight bikes. Thanks. | Though I can confirm the etrailer Trailer Hitch # e28AR will fit all of the 2021 Kia Sorento models, there...
Jayco Jay Feather Ultra Lite 221 Travel Trailer Brake and Bearing Parts
Im having trouble determining the correct parts for my Dexter Axle on my Travel Trailer Jayco Jay Feather Ultra Light 221. It has a gross weight of 4950 lbs, two Dexter axles that have a tag on them that says: S/N: 122817489 Capacity 3000...
Does Gear Kit TJA-2000S-GR Include Keeper Ring
Does this gear kit come with the keeper ring? Your video says and shows that the keeper is part of the TJA-2000-GR replacement kit. When I look at the description of the TJA-2000-GR kit on your website it says nothing about the keeper ring....
Tongue Weight Capacity of etrailer Trailer Hitch For 2007 Toyota Highlander
Need to haul an electric scooter / wheel chair for handicapped person. Will have platform and scooter on and off. Will this class 3 hitch support that weight? | I don't know the weight of the platform and scooter, so I can't definitively say...
Recommended Replacement Jacks For A Rieco Titan Tripod Jack System
Does this fit a Rieco Titan tripod jack for a slide in camper? | The Replacement Sidewind Gear Kit for etrailer and Ram Square, Direct Weld Jacks # TJD-7000S-GR you mention is designed to work with the TJD-5000S and TJD-7000S series jacks and...
Hitch Pin/Lock Needed For Demco Channel Tongue Trailer Coupler # DM15931-95
Will this work with a Demco Item # DM15931-95. Or does the Demco even need a couple pin? Thank you | For the Demco Channel Tongue Trailer Coupler # DM15931-95 you will need the Coupler Pin # 37201281 to ensure the hitch ball does not come unlatched...
Recommended Hitch and Bike Rack for a 2023 Hyundai Tucson
Will the Hollywood RV Rider bike rack for my 2 Aventon Level step through ebike be a good hitch rack for my 2023 Hyundai Tucson? I understand I will need 2 inch reciever right? | Yes, you will want to get a hitch with a 2" receiver. They...
Correct Backing Plate for Tandem Axle Trailer Fenders for Enclosed Trailers 15 to 16 Wheels
On HP84VR, Does fenders a bend on flat side to allow for weld on backing plate. Also need backing plate to match fender. | Yes, there is a bend at the back end of the Tandem Axle Trailer Fenders for Enclosed Trailers # HP84VR. To add a backing...
Availability of Replacement Hardware for Draw Tite Hitch 75673
Hi there - do you see just hardware kits for hitches? I need for Item # 75673. I took our hitch off and in the process damaged one or two of the parts. | We do sell replacement hardware kits for all of the hitches we offer like your # 75673...
Parts Needed to Flat-Tow a 1999 Jeep Wrangler
need advice for tow bar to use with my 1999 jeep wrangler Sahara with original standard bumper. what all would we need to buy? Have never flat towed before and we are both seniors so want something easy to use. Your helpful advice would be...
Will Hands-Free Liftgate on 2023 Toyota Highlander Still Work with Trailer Hitch Installed
I have a 2023 Toyota Highlander limited hybrid with the kick sensor would the tow hitch block the signal | The etrailer Trailer Hitch Receiver # e75ZR is going to fit your 2023 Toyota Highlander Hybrid and still allow you to utilize the hands-free...
Equalizer Upgrade For Haulmark Trailer With 7-3/4 Inch Long Equalizer
I have a 2022 Haulmark 7x12 double axle enclosed trailer with a 7-3/4 equalizer. Part number EQ-E1 2701 Is it possible to upgrade to the MORryde or Dexter absorbing heavy duty style system? | First, thanks for that specific info it was super...
Grease Seals For Hubs on Lippert 4,400 lb Trailer Axles
I need rear wheel seals for a Lippert 4400lb axle. Info says 4400,OS, EZL, 86 1/2HF,68 1/2SC,SAB,CSA Thanks! | The grease seals for the hubs on Lippert's 4,400 lb trailer axles are the same grease seals used on 3,500 lb axles, and you can get...
Options to Have an In-Bed 7-Way on a Truck That is Using the ETBC7 for the Rear 7-Way
I just installed a Modulite 119147kit and a etbc7 7 way connector wiring kit on my 2004 dodge ram 2500. I had to install them to bypass my factory wiring harness as my right trailer lights/brakes/turn signal would not work. So far after installation,...
Can L44649 Bearings Replace L44643 Bearings
My trailer has a 1 inch spindle and has L44643 bearings in it currently I have a brand new set of L44649 is the ID on this bearing too big for my spindle? Thank you in advance! | No, the 1.063" ID # L44649 bearings cannot replace the 1.00" ID...
Will the etrailer.com Cargo Carrier Fit On a Chevy Tahoe When Folded
Will this work on a Chevy Tahoe and will it fold up? | The etrailer.com Cargo Carrier, item # e98874, will fit in the 2 inch receiver of the Chevy Tahoe. To determine if the carrier will fold when installed you will need to measure. I like to...
Brake Controller and 7-Way Trailer Connector Install on 2007 Nissan Xterra
My vehicle is a 2008 Nissan Xterra without the tow package. I will be towing a home made tear trailer of 1000 lbs or less w/ electric brakes, and later, a RV trailer approaching 4,500 lbs. My Xterra has a receiver hitch but no wiring or brake...
Keyed Alike Stainless Steel Hitch Lock for a 1994 Chevrolet Pickup 1500 with 2 Inch Receiver Hitch
I am looking for two locks for my boat trailer/truck connection. One for the trailer tounge and one to the hitch/truck connection. I would like for the locks to be keyed alike and stainless steel. The truck is a 1994 Chevy, Silverado 1/2...
Filter Your Search
Contact and Help