Ford  x   >   2017  x   >   !1988  x   >   !Advent Air  x   >   Fastway  x   >  

I need a four inch drop to level my trailer. The Fastway e2 Weight Distribution w/ 2-Point Sway Control - Round - 6,000 lbs GTW, 600 lbs TW Item # FA94-00-0600 doesnt offer that big of a drop. Can I replace the Fastway shank with the C17124...

I have a 33ft camper that weighs 9000lb with a tongue weight of 900lb. Would the Fastway E2 be sufficient or is the camper to long and I need the Equalizer of the same weight rating? | It really comes down to how much sway you are expecting...

I have a DM14976-52 and am interested in a coupler lock. I know that there are bolt trailer coupler locks, however I would prefer a coupler lock that would be similar to BLTL-20. Thank you | The most similar coupler lock we have to the # BLTL-20...

I need to tow a travel trailer with a 2017 F150 that can tow up to 11,800 lbs. I MUST be able to back up approximately 90 degrees from truck to trailer. My tongue weight will be up to 600 lbs, and tow weight up to 7,000 lbs. Can you recommend...

Can I use a 2 inch hitch ball with fast way e2 92-00-0800. If yes, what ball do you recommend. Thank you | Yes, the Fastway e2 Weight Distribution # FA92-00-0800 can use a 2" ball. The only requirement is that it has a 1-1/4" diameter shank...

I’m looking at the Fast Way, E2 trunnion style hitch for a camper with a 710 pound tongue weight and 6000 pound dry trailer weight. Please advise on the system you recommend. Thanks | The perfect system for your camper that has a dry weight...

I have a 20107 Ford Expedition with the towing package but just purchased a 32 foot fleetwood travel RV with GDW of 6700lbs. What do you recommend for hitch? | We actually don't offer trailer hitches that fit your 2017 Ford Expedition since...

Do you have anything to help for a 2 wd application 2017 Expedition EL. Towing a 6700 lb . trailer | I may have a solution to help with the sag you're experiencing on the rear of your 2017 Ford Expedition with 2wd while towing, but there is...

My 2017 F150 is 6” lifted. Can I use flash FA49-00-5900 to tow. I really like how it looks. | TheFlash Solid Steel Adjustable 2-Ball Mount - 2" Hitch - 10" Drop, 11" Rise - 12K # FA49-00-5900 would be an excellent choice for an adjustable ball...

What stays attached to the truck and what stays on trailer ? Do you have to disassemble the whole thing to unhook ? I dont get it. Basically what do I have to do each time I unhook or hook up ? | In regards to the Fastway e2 Weight Distribution...

Hi, Well Im glad I did a little bit more searching! I was looking at a Fastway E2 450 weight distribution hitch for my 2516 Rockwood being towed with a 2017 Ford Flex EcoBoost. But I have found out that I need a hanger kit as the a frame of...

It doesnt mention it specifically and the lack of a sizable gusset makes me wonder. Are shanks normally rated as supporting weight distribution or not? I have a Husky weight distribution hitch head assembly that I need a new shank for. | I...

Just got off the phone with another expert. My truck has built in sway control. Its a 2017 F150. I am using a Equalizer E2 12,000 hitch. Supposed to have built in sway control on the hitch also. Trailer weighs around 8300 loaded. Experts...

Will Item # BD580402 work on the new F250 three inch receiver hitches? If not, what do you have that will? | The lock you mentioned is designed for 2 inch trailer hitch receivers so it will not fit on your 2017 Ford F-250 with the 3 inch receiver. For...

Hi....looking to tow a 2317 Rockwood with a ford flex ecoboost. Dry hitch weight of 300 and trailer is 2800lbs dry. Ive been told the 450 from local dealers but its advised on etrailer with similar specs that the 600 is the way to go....

I need to purchase a trailer hitch I have 3 models Im looking at and would appreciate some expert advice. Thanks | It sounds like from your history on our site that you're looking for an adjustable ball mount for your 2017 Ford F-350. Of the...

I have a 2107 Ford F-250 Super Duty Pick Up. It comes with a oversized hitch but includes a reducer to make it compatible to 2inch hitches. Is the locking pin long enough to go the hitch and reducer? Frequently I run into this problem. |...

Hi I recently asked a question about the Fastway E2 600 being good enough for my trailers 300 pound hitch weight......made a mistake....My new trailer is now going to be 400 pounds in tongue weight dry. I am assuming that the Fastway E2 600...

My new camper has a tongue wt. of 530 lbs and trailer wt. of 5000 lbs. cargo capacity of 1683 lbs. what size Fastway e2 hitch do I need ? | The best way to choose the correct Fastway e2 Weight Distribution System is to take the GVWR of the trailer...

I have a Ford F250 super duty truck with a pop up camper. The camper fits in the bed of the truck -flush with the end of the bed. Tailgate is removed. The receiver is 2.5 inch with the pin holes about 1.5-2 inches from end of receiver. ...

Deadbolt locking pin rh5 xl - Do they offer these keyed alike pins in different lengths? I have a fastway e series flash drawbar with a 2 1/2” shaft for 2017 Ford F-250. The pin for the ballholder needs to be longer. 4 1/2” gap I believe If...

I have a 2016 malibu 23lsv on a boatmate trailer surge brakes? and a 2017 Ford Expedition 4x4 with the heavy duty tow package. Which distribution hitch and sway control are best? Also, are there any other adapters that I need? As well,...

Good morning. I have a 2018 Keystone Crossfire Bullet 1800RB, that I want to pull with my 2017 Ford Explorer equipped with the factory Class III hitch set up. Can you recommend a weight distribution hitch with sway control that I can back...

weight distribution hitch for Ford Expedition towing a 2 horse Featherlite trailer - expedition tow on ball is 6000 but 9200 with weight distribution hitch - what do I need? | Which weight distribution hitch you'll need will depend on the specs...