Can the Air Lift 1000 Drag Bags Be Inflated Separately?
thanks, but i dont need a pump, i just want to put more air in the left side. a seperate shrader valve for each would be ok. | The Air Lift 1000 Drag Bags for Coil Springs item # AL60844 comes with everything you need to set the air bags up...
Does Bulldog Winch Mounting Plate Fit 2008 Arctic Cat 400 Without Drilling Holes
Will the Bulldog bdw15002 and mounting plate bdw15108 fit on my 2008 arctic cat 400 without drilling any new holes? Thanks. | Yes, so long as your 2008 Arctic Cat 400 is one of the following models, the winch mount will fit without drilling...
Recommended Dual Path Air Compressor and Air Bags for a 1967 Chevelle
i may try some air bags on my 67 chevelle , do you know if i can get them to inflate individually? | If you use a dual path air compressor like the Air Lift Load Controller Compressor System item # AL25856 you will be able to inflate the Air...
Recommended Dual Electric Radiator Fan w/ Shroud for 1967 Chevy Chavelle
I have a 67 chevelle aluminum radiator bb 427 core dia 22-17 wanting electric fans and shroud to fit what I have also has long water pump I have 2 and five eights from pulley to core need something low profile?? | For your 1967 Chevelle I recommend...
Electric Radiator Fan Less Than 2-3/4" Wide for 1967 Chevrolet Chevelle SS
Hello, I have a 1967 Chevelle SS with a 496 BB. I have been having issues with overheating since I have added air conditioning, plus I live in Arizona where the temps are crazy hot. I do not have but roughly 2-3/4 to work with for depth as...
Will Trailer Hub and Drum Assembly # AKHD-655-35-EZ-K Fit Lippert Axle
Will this fit a lippert axle | Yes, the Trailer Hub and Drum Assembly # AKHD-655-35-EZ-K that you referenced will fit a 3,500 lb Lippert trailer axle. |
Can the Deka Battery Isolator DW08770 Be Used On a Boat
can it be used in a boat where I have a starting battery and a separate battery for my accessories. | Yes, the Deka Battery Isolator part # DW08770 can be used on a boat to separate the starter and auxiliary battery but you would need to mount...
Instructions and Minimum/Maximum Air Pressure for Air Lift Drag Bags on a 1968 Chevy Chevelle
I need instruction sheet. Also what is max. air pressure | The Air Lift Drag Bags for your 1968 Chevy Chevelle are # AL60844. The instructions are linked on the right hand side of the page for you (here and on the product page). The minimum...
Fit of Air Lift 1000 Drag Bags AL60844 on 1969 Chevrolet Chevelle
Hello, I have a 1969 Chevelle SS 396/375 4-spd car and have a couple questions. 1 Do these bags prevent wheel hop? 2 Can order these bags in a different color preferably Black? Thanks | The AirLift 1000 Drag Bags for Rear Coil Springs # AL60844...
Winch Mount Recommendation for Superwinch on 2006 Arctic Cat 400
2006 Artic Cat 400 work quad. Any information on installing winch and location of relay on this quad. It looks like it has a factory winch plate, can I use it. | The winch plate you need for your 2006 Arctic Cat 400 is the Bulldog Winch Custom-Fit...
MagnaFlow Exhaust Recommendations for a 1967 Chevelle Super Sport
Will this kit work on a 1967 Chevelle SS with a 502 BB? | According to MagnaFlow, the Stainless Steel Crossmember-Back Exhaust System, # MF15897, will fit your 1967 Chevelle SS. This kit is a cross member back exhaust kit. My contact at MagnaFlow...
Trailer Hitch Receiver Recommendation for 1970 Chevrolet Chevelle
Hi, Do you carry a trailer hitch set up for a 1970 chevy chevelle? It would be nice to tow a small trailer. Thanks! | Although we do not have a custom fit hitch available for your 1970 Chevrolet Chevelle, I have a hitch that should work for...
Replacement Winch for 2008 Arctic Cat 400 with Factory Mounting Plate
Im seeking a replacement for a broken Warn 2.5 CI winch that was originally installed on my 2008 Arctic Cat 400. The original winch was built by Warn for Arctic Cat according to a decal. Can you recommend a replacement winch kit and let me know...
Stainless Steel T-Strap Hinge for Side and Rear Trailer Doors
Are these hinges stainless steel? | Polar T-Strap Hinge for Side and Rear Trailer Doors # PLR3416 is galvanized (zinc-plated) steel but not stainless steel. The zinc coating helps resist corrosion. For a similar hinge that is stainless steel...
Powered Fans to Correct Cooling Issue with 427 Big Block in 1966 Chevrolet Chevelle SS
Have a 66 Chevelle SS with 450HP 427, auto trans, new 160 thermostat, and aluminum radiator and dual fan setup I believe to be by Champion. Just bought the car. Dont know the CFM of the fans, but they appear pretty small. The engine runs VERY...
Filter Your Search
Contact and Help