Result:

I dont find a plug and play tow vehicle harness for a 2006 Lexus RX400H Would a 2006 Highlander harness be used on the Lexus, thought they may be close to similar. thanks. | The reason there are no plug-and-play trailer wiring harnesses for...

What is meant by stabilizing straps for non-trailer loads? | Non-trailer loads are hitch accessories like bike racks and cargo carriers. Basically anything that is not a trailer that you could put on a hitch. Curt recommends you use a Curt Trailer...

my is 2004 rodeo 3.5 liters wish i will use | The only trailer hitch that will fit the 2004 Isuzu Rodeo with 3.5 liter motor is Curt hitch # C13235. But in order for this hitch to fit your Rodeo must have the rear door mounted spare tire. It...

I know nothing about cars. Can you explain it to me like a toddler....in not kidding. Ive been googling for hours and half of my googling is just for mechanical terms. I have the Lexus rx400 2006 model. Im planning to tow a 2000lb trailer, will...

How do you get the full size spare tire back in place without removing the hitch. The tire hits on the front cross member suspension and hitch. There is no clearance for it to pull up into place. | The Curt Trailer Hitch Receiver part # 13530...

For a 2007 Lexus RX 400h. Is the hitch built so the spare tire will come down as it should if needed? | The etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2" Item # e98857 on your 2007 Lexus RX 400h does still...

Hi, My 2006 Lexus RX400 H already has a 4 pin wiring harness hooked up and working. How do I transform this setup into a 7 Pin setup so I can tow a small trailer? Lance Trailer 1575 Thank you, | If the trailer doesn't have brakes all you...

have a question about hitch and hard form . I removed the bumper today for preparation for hitch installation. The bumper has the hard foam but it is wedge between the front and back metal bumper with a full metal back hard foam cannot be...

This rack is recommended by your site for the 2000 Isuzu Rodeo, My vehicle has a small spoiler above the back window and cargo rails on top. The spare tire is mounted below the vehicle. We purchased a new mens Diamondback Edgewood and womans...

Will this hitch fit a 2008 Lexus RX400H? | Yes, Curt trailer hitch # 13530 fits your 2008 Lexus RX 400h. I have linked a video showing an example installation for you. If you plan on doing some towing I recommend etrailer ball mount kit # 989900....

Hi - I recently received a CURT C11074 Trailer hitch for the 2009 VW Rabbit from a friend who no longer has their MK5 rabbit. Is it possible to purchase *only* the replacement mounting hardware for this specific mount instead of the generic...

I purchased the replacement CURT trailer hitch hardware from eTrailer for this hitch and installed the 11074 on my 2009 4DR Rabbit. However - after install, I now experience a lot more noise at low RPMs. Theres vibration being transmitted back...

When installing part number 13530 can I just manually torque it, or do I need an electric torque to get to the 36lb-ft req from the installation instructions? | When installing the Curt Class III 2 Inch Hitch, part # 13530, on your 2006 Lexus...

Questions about a 2007 Lexus RX400h tow.... Im thinking of installing a hitch on my 07foot lexus 400h. Im thinking of using the hitch to install a type of single dirt bike rack. The combined weight of the rack and the bike will be 300lbs. Is...

Will this one work? The rear window is glass... The extra wheel is mounted under the vehicle. II have no trailer hitch and as a single female, cant lift bike overhead for roof rack. That pretty much leaves trunk mount, but with the glass, not...

Will this hitch fit on the Rodeo with 3.5 liter motor? | The Curt trailer hitch # C13235 is designed to fit 1998 to 2004 Isuzu Rodeo models with a door mounted spare tire. It does not matter which engine you have for the Rodeo. I have included...

I think I know the answer but I am considering the hitch hook up for my 2008 Lexus RX 400H but I currently have grill bars in the back. Looking underneath, it appears that the carrier would be using the same holes as the grill bars. Therefore,...

Will this kit 13530 and C59496 work with 4 wheel drive and the LED tail lights | Yes, the Vehicle Wiring Harness, part # C59496, will work with the LED lights that your 2006 Lexus RX400h has. Yes, the Curt Trailer Hitch Receiver - Custom Fit...

Hi! I just bought and installed one of your 2inch hitch receivers on my 2007 Lexus RX 400h - the #13530. I was wondering how I can use the rack in the attached photos with the hitch receiver? Do I need an adapter? It seems that Ill need something...

Re: 2006 Lexus 400h trailer hitch 13530 from Curt. I wonder how this hitch affects the lowering of the spare tire. It would appear to be a very tight fit, but perhaps all it takes is a push forward on the tire as it is lowered? The OEM part...

Hi- We have an 06 Lexus 400h that has factory- installed 4-way wiring next to the tow hitch. Were planning on renting a tear trailer that requires the 7 way wiring connector. I see you have a couple of kits to adapt what we have 37185 or...

Will this hitch fit a 2005 VW Rabbit? If Not do you make one? Or what is the difference between 05/06? | The new body style VW Rabbit was introduced to the US as a 2006 model. I do not have a listing for a 2005 VW Rabbit, just a Golf. You...

Hello, We have a 2008 lexus 400rx and need to get a wiring kit for a 7 way plug to tow out little fiberglass camper. We dont need a line to the brakes, but need a line to charge the battery in the camper. A 4 way plug is not sufficient. Can...

Your instructions, both hard copy and online, are inadequate for this vehicle. Lexus forums report that there may be a prewired connector for this, though I havent found it on mine. Access to the wiring harness is not described at all by your...