Result:

I have a ROLA 10188 Adventure system pod/tray. I’m looking to replace the incandescent light assemblies with LED assemblies. Do you carry these? | Hey Thomas. ROLA went out of business quite awhile ago but you can use the Optronics LED Trailer...

Id like to add a couple of LED backup lights to my kayak trailer. The trailer currently does NOT have LEDs. Can I install these or will it require a complete overhaul of my lights and wiring? Thank you | It sounds like you are wanting to replace...

Can you get me a set of Optronics STL87 Smoke Series lights? The manufacture part number is - Polypack part no. STL87DSRSHBP | Hey Glen. We've got a couple of options for Optronics Smoke Series lights but we don't have the STL87DSRSHB which...

I am looking to upgrade the rear lights of my Car Mate 5x8foot utility trailer. I currently have Peterson PM444L lights. I am hoping to use the TLL16RK set however I am not sure if they will fit. The Petersons have the standard 2 inch center...

Where is this manufactured? | Hi Peter; Optronics does have some manufacturing facilities in the US but as far as I know the components included in the Optronics Trailer Light Kit # TL16RK come from their facility in Taiwan. |

Hiw do I replace the bulb in the snap in license plate light? | In order to replace the light bulb part # 67 inside of the Optronics Snap-In Mini License Plate Light part # LP11CB you will need to take a small screwdriver and then pry the light...

I have the trailer lights wired through a conjunction box to a WesBarg 7-Way, RV-Style Connector w/ 6foot Long Coiled Cable - Trailer End - WG54006-043. the turn and brake lights work. the right side running lights work but not the left. | On...

Will this fit a SAE AP2 01 replacement amber side maker lens for a 2007 Rockwood Freedom 1640 LTD tent trailer? | If your original light is 4" L x 2" W x 1-1/8" D then Optronics light # MC32AB will fit in its place. If you have different dimensions...

Hello, I have a camper and the receiver for the bunk light has a 5.5mm female connector but my bunk light/fan is a 1/4 in stereo jack. Is there an adapter or would I replace the existing Jacks? Thank you | We don't have an adapter, but...

I have purchased a 2006 Ford Ranger Pickup which I want to flat tow behind my motorhome. Are there special brackets to mount on the pickup for the tow bar or are they universal mounts. I need to order a tow bar and brackets but I am not sure...

What parts do I need? | If you haven't already the first thing you want to do is make sure your 2000 Ford Ranger can even be flat towed with all 4 wheels down behind a motorhome. From my research the 4-wheel drive model can as long as it's...

Looking for a complete LED submersible wiring kit for my 1991 ranger bass boat trailer. the kit would include 2 amber and one red LED on each side and sort of oval red brake/turn/tail lights and 2 small red rear lights as seen in the attached...

What parts do I need to order? What about adding a trans oil pump so I dont have to stop every 5 hours? | First, I recommend checking your owners manual for any restrictions or limitations for flat towing your Explorer. I did some research on...

Id like to upgrade my non- reflector trailer lights with your reflectors only. Are there any requirements as to how close these should be placed to the side marker lights? Thank you. | Trailer lighting requirements will vary depending on the...

How can I attached Obtronics led license light to a pre-installed Curt aux led indicator lights, #5302? I have a hitch mounted cargo carry or is there a product that incorporates indicator lights and license plate light? | The Optronics LED...

The signal wire from the right turn signal is disconnect somewhere in the vechicle, so where does the green wire start from in the 2000 ford ranger? I put all new wiring harness on boat trailer and it still does not work. | If your 2000 Ford...

The old light has two black wires coming out of the bulb harness, one connects to a white wire and one connects to a green wire all 5 lights on the back on strung together...the new LED light has one black wire. Should the one black wire from...

Will hitch BX7420 work with base plate BX2198 and will both work for flat towing a 2006 ford explorer? | Yes, the Blue Ox Base Plate Kit # BX2198 would be compatible with your 2006 Ford Explorer and the Blue Ox Avail Non-Binding Tow Bar # BX7420....

I looking at buying the MCL95AB Side Marker Lights and I need ones with a center mounting post. It Appears that these lights have a 12 gauge wire and the wiring harness has a 20 gauge wire. I want to use quick splice connectors to connect...

base plates for a 2002 ford ranger super cab standard 4 wheel drive - can I use a front mount hitch to attach tow bar? | A front-mount hitch such as # C31063 cannot be used to flat tow a vehicle such as your 2002 Ford Ranger because you would...

I need a five wire flat plug wiring harness for this 2016 Ford Explorer to activate my reverse solenoid that deactivates my trailer surge brakes when backing up. This car does not have an OEM trailer towing package. I bought your four wire harness...

Do you have a kit that will work with a 1989 ford ranger? I want to set it up to be towed behind RV. | We can help you with the items you'll need to flat tow your 1989 Ford Ranger behind your motorhome. These include components like the tow...

I have a 2002 Ford Ranger just put new wire harness and lights on my trailer but now neither lights work when I turn on the turn signal in the truck.I did check all the fuses in the cab of the truck,but the fuses under the hood you cant tell...

Flat towing 2013 ford Explorer Sport NOT a Sport Trac with 3.5 Ecoboost. Searched everywhere and found LOTs of threads about the older Sport TRACs but thats a different animal from our 2013 Explorer Sport... lets go down the checklist: 1 Ford 2...