Result: knobs

It doesn't look like we offer any replacement hand knobs for the Rhino-Rack Kayak Roof Rack with Tie-Downs part # S512. | Do you sell replacement locking knobs for the 512S kayak carrier? I dont like that they are not lockable,...

What size thread is the tightening knob? Can the stud Bolt? be changed to use with Yakima Lock Housing Y07220 which has 5/16-18 thread? | What size thread is the tightening knob? Can the stud Bolt? be changed to use with Yakima...

Just measure the available bar space between the knobs to be sure the basket can rest down fully on the bars without interfering with the knobs. | Hello. I am looking to purchase a Rhino Rack cargo basket,...

| The knobs of the Heavy-Duty Crossbar Fit Kit # RUBK-MF would only thread about half way down the threaded portion of the u-bolt. | Getting an 50 x 22 aluminum rear cargo carrier that s into a 2in. hitch. Also, a Dee Zee...

I have attached a photo that shows the measurement of the knob and the bottom plate that goes under the crossbars on your 2014 Kia Soul. | Ive installed the Kia factory crossbar roof rack on my 2014 Soul and now need more...

However, the C-Channel Nautic, part # RR580 does fit in the channels of the Thule AeroBlade, and uses optional locking covers over a hand knob to tighten the carrier into the channel. You can leave the carrier's cover off for easy access to the hand knob, and quickly move the carrier left and right as you need to. |

For a set of Replacement Load Stops for your Thule TH500 Ladder Rack you can use their kit # 753-3761 which includes 4 each load stops, knobs and T-bolts. My contact at Thule said the part number you referenced is the original part number but that this kit will fit your rack. |

I pulled the Rhino-Rack Zenith MasterFit # RRRMFZ66 from the warehouse and found that there is about 12-1/2" between the mounting knobs and about 14-1/2" between the tracks they sit on. | How many ski and snowboards can this...

It uses brackets and hand knobs that have been confirmed to work with Honda's roof racks. | Will this product fit the Honda crossbars on my 2023 Honda CRV? Thank you. | Yes, it will! The Rhino-Rack Kayak Roof Rack w/ Tie-Downs...

It uses metal reinforced rubber straps to secure to the crossbars using a knob to tighten and loosen them. This makes it a no-tool installation. | Hello, will this work on a 2010 Toyota Highlander or can you recommend one that...

This kit consists of 4 u-bolts, 8 plastic knobs with threaded steel inserts, 8 washers, 8 plastic caps for ends of the u-bolts, and 4 metal brackets. | Would appreciate knowing the length of threaded part of U bolt. Thank...

It should have no issue fitting onto the Thule Wingbar EVO crossbar channel. Make sure the knob on the kayak carrier is loose enough to slide into the channel track. | Cant get the Rhino Rack 581 on my Thule Wingbar EVO. ...

If you're OK with mismatched pairs, Rhino Rack's Load Stops, part # RRRLH2 are similar stops available in a 2 pack that uses a clamp instead of the tightening knob to clamp into the channel of your load bars. | Do you carry...

It looks like access the knobs will be very close to the roof if I use the clamps and it will be difficult to take it on and off. | Would it be okay to mount the Rhino-Rack S512 be mounted to a Prinsu Rack 80/20 extrusion using...

I am looking for a basket for my 13 Patriot with OEM cross bars that have the knobs. What basket do you recommend | I am looking for a basket for my 13 Patriot with OEM cross bars that have the knobs. What basket do you recommend...

This comes with locks for the skis/boards but it also has security Allen bolts that prevent anyone from loosening up the adjustment knobs when those bolts are secured. Attached is a review video for you to check out. | I see...

The U-bolt size of the part # RUBK-MF is what you mentioned seeing in the attached picture. The knobs are larger so it might make them look smaller when looking at the product pictures. | When you look at the photo of the...

Since the Rhino Rack Carrier part # S512-S512X uses the U-bolt style attachment with hand knobs to tighten the carrier, it will fit well around your thinner cross bars to carry 2 kayaks. | Hi, Most of the universalinch carriers...

If you take a look at the attached photos, you can see the locking knob on the back of the end cap which engages with a keyway slot inside the crossbars and that is what secures the end cap to the crossbar. | I have this same...

With that being said, it is important to check the underside of the canopy to make sure that the knobs have sufficient clearance to be located. I went ahead and attached the relevant screenshot from the manual below this answer....

These crossbars have tightening knobs that stand proud of the bar itself and are spaced approximately 38inch on center 36.75inch in between them on the inside and 40.75inch on between outside edges. | I am looking for a roof...

Looking for replacement roof rack stopping parts that lock into cross members. they are black, black knob an upright of about 3inch and lock onto cross rails. | Looking for replacement roof rack stopping parts that lock into...

For your 2nd question there is no way to change out the bolt and knob used to attach the kayak rack with a lock. And finally you will be able to use the DockGlide on the Rhino-Rack T-Load Hitch Mounted Load Assist Extender # RTL002. |

Let's start with the clearance needed under the crossbar, and you won't need much, just about 1-3/8 inches for the knobs to clear when mounting the Rhino-Rack 2-Kayak Carrier with Tie-Downs # S512-S512X. | Will this fit to...