Result: knobs

Hi, I have the INH120 rack and lost the keys to it and the rattle knob is locked to the rack. If I order a new one with keys will those keys work with the existing knob? | Hi, I have the INH120 rack and lost...

I have a Reese Outfitter Bike Rack. I need to replace a knob. The 1/2 in. thread bolt is press fitted into the rack and the female knob screws on. | I have a Reese Outfitter Bike Rack. I need to replace a knob....

The Locking Knob is the only think like this from Yakima that I know of. | I am planning to build a custom base bar setup to clamp to my trucks Thule SR Base rails. Im thinking of using the Inno square base bars drilled and...

I need the key for anti shake knob, My rack is INNO INH 110, purchased from you. | I need the key for anti shake knob, My rack is INNO INH 110, purchased from you. | To get the correct replacement key for the locking knob...

The Tall Crossbar Adapter Kit # INISF711 comes with the bolts only, and does not come with the turn knobs. The knobs would be included with your Inno roof mounted carrier. | Hi! Can you please tell me if...

Or what is your recommendation for a knob for this thread | What is the thread on this? Looking for a replacement knob for my bike rack and it has 1/2” x13 threads. Or what is your recommendation for a knob for this thread |...

Trying to either find locking knobs for the specific threading I’ve seen them for bike racks, but no published thread specs or finding replacement hardware to match the thread requirement on locking knobs. ...

How it works is that you use the knob that is in the hitch pin area to secure it to the hitch and then using the anti-rattle knob that is more towards the rear of the carrier you are pinning the carrier to the hitch tube. |

Worn trunnion knobs Why??? | Worn trunnion knobs Why??? | Metal to metal friction especially in something that has as much torque and spring bar pressure as a weight distribution system will eventually cause wear. For replacement...

The Tire Hold # INH120 is locked into the hitch and won't fall or be pulled off due to the tensioning hand knob at the front. After you tighten it in the hitch, which expands the shank, you lock the knob, and what this does is prevent the knob from being utilized. |

When we heard a thump on the roof of the Jeep, I pulled over to check and found the u-Bolt with one knob still attached and the other knob loose on the top... but the Top Mounting Bracket D had already fallen off the vehicle. |

Hi Victor; are you referring to the knob marked with an arrow in the picture below? You can reach out to Inno and might have some luck with them sending just the knob. | Hello, i have an Inno fairing and i...

The Inno Feet, part # INSU-K5 come with the locking hand knobs and includes 2 keys as well. | hello, I have a 2009 Dodge Caliber SXT and am interested in the Inno Square Bar Roof Rack. I would like to purchase the locking hand...

In addition to the locking hand knob that secures the rack to the hitch/vehicle, this carrier also has an integrated cable lock to secure the bikes to the rack. | Hello, Does this rack lock to the hitch? I saw a review on another...

This is the controller that just puts a small knob on your dash like you are looking for. For a WD system the Reese Steadi Flex part # RP66558 would be a great option. | I have a 2021 Tacoma TRD Sport w/ a tow package and...

Hey Christian, Since Inno designed their roof rack system to use the fixed mounting points on your 2022 Honda Pilot's rails you would have to loosen the tension knob and retighten it every time that you wanted to remove/reinstall the crossbars. |

However, when you compare them with the Memory Mount clamp, the knobs in the Quick Mount that you have to turn and tighten/loosen rely more on your ability to tighten them down every time. | Looks like this box fit 2019 Subaru...

When installing a new spring bar, you basically just set the "knob" end of the spring bar into the socket on the ball mount. | How to properly install a draw tight 1200 lb sway bar for toy hauler | Hello Todd. When installing...

The Inno Tire Hold 2 Bike Platform Rack # INH120 has an anti-rattle knob (no tools!) that you turn once you put it in the hitch. | What would i need for a lightweight tilt platform rack for 2 bikes: I have a ebike and one...

You made a great choice with the # IN25RR as it's easy to install with the twist of a knob, and has ramps so you can just roll your Aventon bikes into position instead of trying to lift them up on the rack. | Will this rack...

I baught tgis small trailer from my buddy and i noticed it had this knob welded on the side of the tongue. Someone said it might be a place to mount a spare tire but i have no idea. | I baught tgis small trailer from my buddy...

The Inno Tire Hold 4 Bike Platform Rack part # INH142 comes with locks for both the hitch and bikes. The hand knob on the front of the rack which is used to tighten and loosen it has a lock core built in that won't let you loosen it, which is required to remove the rack, without the key. |

Although it's not threaded all the way like the original Inno carriage bolt, it will provide enough of a thread to install the bottom knobs without a problem. I have attached a couple of photos to illustrate. | Do you know...

This rack has locking torque knobs that secure the rack to your vehicle. I have included product description links and a video review link below. | What is the distance between bars bar spread. | The 2020 Honda Accord Roof...