Result: knobs

Hi, I have the INH120 rack and lost the keys to it and the rattle knob is locked to the rack. If I order a new one with keys will those keys work with the existing knob? | Hi, I have the INH120 rack and lost...

Do you turn the knob in or out to get more braking power ? | Do you turn the knob in or out to get more braking power ? | The braking force level on the Hayes Air Utility Brake Control # 1300-80 is adjusted by rotating the black...

The Locking Knob is the only think like this from Yakima that I know of. | I am planning to build a custom base bar setup to clamp to my trucks Thule SR Base rails. Im thinking of using the Inno square base bars drilled and...

HA100400B I did not receive any operations instructions. Does turning the knob adjust brake action? | HA100400B I did not receive any operations instructions. Does turning the knob adjust brake action? | The Brake Controller...

I read the instructions on the pdf it says to turn the knob to adjust the brake but my knob doesn’t turn at all it moves a little but that’s it I don’t want to twist the crap out of it cause might break it |...

I need the key for anti shake knob, My rack is INNO INH 110, purchased from you. | I need the key for anti shake knob, My rack is INNO INH 110, purchased from you. | To get the correct replacement key for the locking knob...

The Tall Crossbar Adapter Kit # INISF711 comes with the bolts only, and does not come with the turn knobs. The knobs would be included with your Inno roof mounted carrier. | Hi! Can you please tell me if...

Trying to either find locking knobs for the specific threading I’ve seen them for bike racks, but no published thread specs or finding replacement hardware to match the thread requirement on locking knobs. ...

How it works is that you use the knob that is in the hitch pin area to secure it to the hitch and then using the anti-rattle knob that is more towards the rear of the carrier you are pinning the carrier to the hitch tube. |

The Tire Hold # INH120 is locked into the hitch and won't fall or be pulled off due to the tensioning hand knob at the front. After you tighten it in the hitch, which expands the shank, you lock the knob, and what this does is prevent the knob from being utilized. |

The Universal Mounting Panel for Redarc Tow-Pro Trailer Brake Controller Control Knob item # 331-TPSI-001 which measures 1-1/4 by 1 inch. | What brake controller and wiring harness do I need to add electric trailer brakes to...

Hi Victor; are you referring to the knob marked with an arrow in the picture below? You can reach out to Inno and might have some luck with them sending just the knob. | Hello, i have an Inno fairing and i...

The Inno Feet, part # INSU-K5 come with the locking hand knobs and includes 2 keys as well. | hello, I have a 2009 Dodge Caliber SXT and am interested in the Inno Square Bar Roof Rack. I would like to purchase the locking hand...

In addition to the locking hand knob that secures the rack to the hitch/vehicle, this carrier also has an integrated cable lock to secure the bikes to the rack. | Hello, Does this rack lock to the hitch? I saw a review on another...

This is a low profile option where the main unit mounts out of sight so only the control knob is visible. The knob controls the brake power and also acts as the manual override. | Looking for an appropriate...

I turned the knob approximately 1/2 turn CW, and the lights went out. | Why would this make the brake lights on a 2019 Freightliner M2 106 be constantly illuminated? It was wired correctly and plumbed correctly from upfitter...

Hey Christian, Since Inno designed their roof rack system to use the fixed mounting points on your 2022 Honda Pilot's rails you would have to loosen the tension knob and retighten it every time that you wanted to remove/reinstall the crossbars. |

Yes, the Hayes Air Actuated Trailer Brake Controller # HA100400C can be manually operated. The knob can be pushed to side to manually activate the trailer brakes. | Can the HA100400C truck air brake to electric brake controller...

However, when you compare them with the Memory Mount clamp, the knobs in the Quick Mount that you have to turn and tighten/loosen rely more on your ability to tighten them down every time. | Looks like this box fit 2019 Subaru...

The main unit mounts out of sight so it isn't taking up space and you only have the control knob visible in the dash. The knob acts as the manual override and uses a colored LED for diagnostics. | What brake...

The Inno Tire Hold 2 Bike Platform Rack # INH120 has an anti-rattle knob (no tools!) that you turn once you put it in the hitch. | What would i need for a lightweight tilt platform rack for 2 bikes: I have a ebike and one...

You made a great choice with the # IN25RR as it's easy to install with the twist of a knob, and has ramps so you can just roll your Aventon bikes into position instead of trying to lift them up on the rack. | Will this rack...

You can adjust brake rate by adjusting the control knob on the controller and manually activate the brakes from the slide bar. | I don’t see any wires above brake | The Hayes Air Actuated Trailer Brake Controller # HA100400C...

The Inno Tire Hold 4 Bike Platform Rack part # INH142 comes with locks for both the hitch and bikes. The hand knob on the front of the rack which is used to tighten and loosen it has a lock core built in that won't let you loosen it, which is required to remove the rack, without the key. |