Result: knobs

Opener is still good just need knob. | Looking for plastic knobs for ventline opener. Have 2 that cracked and need to replace. Opener is still good just need knob. | Hey Kevin, so oddly enough Ventline doesn't offer just the...

The manual lift knob on my Dometic 1400 vent fan seems to be stripped. | The manual lift knob on my Dometic 1400 vent fan seems to be stripped. Even after tightening I can’t make it lift or close. Do you carry a replacement...

It looks like the molded pn on the broken knob is VD0473-3. Can you help me find this part? | Hi, VD043-3 I have a Venline V2094 in my trailer and the knob broke. The shaft is D shaped, not toothed or serrated as shown in...

Does this vent have a knob that turns to open the vent or a metal lever? | The product picture on V2092SP-28 doesnt match the product images below the picture. Does this vent have a knob that turns to open the vent or a metal...

What size is the screw to hold the knob in place?? | What size is the screw to hold the knob in place?? | The screw that comes with Replacement Operator w/ Knob and Screw for Ventline Vent # BV0115-04 is a machine screw #8-32...

Could you please tell me the width and depth of this knob? I am trying to replace some window knobs in my camper that look the same, but I want to be sure they are the same size. | Could you please tell me...

Is there any other knob that Is compatible? Im not gonna replace the whole range hood because of the knob. | Is there any other knob that Is compatible? Im not gonna replace the whole range hood because of the...

I am looking for a replacement knob and screww for this item... What are my options? | I am looking for a replacement knob and screww for this item... What are my options? Thanks | For your Ventline Ventadome Trailer Roof...

I need a replacement knob for a Vent line VD0434. I could not find the part number. | I need a replacement knob for a Vent line VD0434. I could not find the part number. Can you help find me one? | I do have some possible options...

Yes, there is a screw that holds the plastic knob on that looks like a gear on the Ventline Ventadome Model V2119. | Hello Is there a screw that holds the plastic gear on? I bought an rv used and the plastic gear is missing...

For the screen with switch use the Replacement Screen Frame with Screen, Rocker Switch, and Wire for Ventline Roof Vents - Polar White part # BVC0573-41R For the no powered use the Replacement Screen Frame with Screen for Ventline Ventadome Trailer Roof Vents - Polar White part # BVC0573-41 These do not come with knobs so you will want Replacement Operator, Knob and Screw for Ventline part # BVD0462-00 for the entire assembly or Replacement Plastic Operator Knob for Ventline part # BVD0421-15 for just the knob/crank. |

How long is the shaft on the knob | How long is the shaft on the knob | The shaft of the # BVD0421-15 is 1/2" long. |

My unit has a plastic cap and a crank raher than a knob, but a knob is ok if it will work. Any thoughts? | I need the crank and arm for my 99 Jayco 5th Wheel. My unit has a plastic cap and a crank raher...

Neither knob is long enough. You show a Replacement Knob Mounting Screw for Ventline Northern Breeze Trailer Roof Vents but I cannot find the sleeve that goes with it. | I purchased a new Ventline BV0115-04...

For a replacement handle for a Ventline vent model V2094 you can use Replacement Plastic Operator Knob # BVD0421-15. If the inside splines of your knob are stripped then the new one should get you going again. ...

I went out to the warehouse and measured a Replacement Operator w/ Knob and Screw, # BV0115-04. The center to center distance between the mounting holes is 2-3/8 inches. | Im looking for a replacement mechanism for my 14 ventline...

After removing the knob, you will need to use a square-bit screwdriver head to unscrew the knob mounting bracket. | I broke the white cover and got a replacement cover from my local dealer. I got it home but...

It sounds like you're looking for a replacement window crank and knob for your 2005 Bantam Flyer. We do carry some replacement RV window parts, like the JR Products Window Knob # 37220355 for a 1/2 inch shaft or # 37220345 for a 1 inch shaft. |

If your Ventline roof vent was manufactured post 2008, you'll just need the Replacement Operator, Knob and Screw for Ventline Ventadome Trailer Roof Vents w/ Wedge-Shaped Dome # BVD0462-00. | I wrecked my trailer However When...

Replace the screen and then the knob. Turn the knob to make sure the lid will fully close and open and you will be done. | just received a replacement cover from you. I see that the cover slides in from the...

Rotary knob part number | Rotary knob part number | I reached out to my contact at Ventline and unfortunately the rotary knob is no longer available for your older PR-8 100 CFM model range hood. Your only real option at this...

It fits fine but the original switch knob is too big for the opening. I need to purchase 2 switch knobs. | Can I buy replacement switch knob that will fit thru the opening of new part? I have 1986 Airstream...

This kit includes the operator, knob, and mounting screw and is made in the USA. | I have a ventline model 2394 and need a replacement mechanism arm for it, what model part do i need | For your older Ventline 2394, you can...

Can you please advise on version with twist knob opening? Thanks very much! | Hi! I see the answer for manual open however my screen has a circle cutout for a black dial knob to open the vent cover. Mine are sun brittle and...