Result: knobs

All of the faucets knobs we carry are plastic, so replacement knobs will have the same strength and durability. | I purchased a total of 4 acrylic Phoenix faucet knobs to replace mine in my bathroom in my manufactured...

Does this switch work by simple turn of the knob or does the knob have to be depressed then turned? | Does this switch work by simple turn of the knob or does the knob have to be depressed then turned? I have...

Looking for faucet for my 2006 pop up camper Fleetwood Bay side duel knobs with swivel neck 4 in centers 5 inch height | Looking for faucet for my 2006 pop up camper Fleetwood Bay side duel knobs with swivel neck 4 in centers...

The RV Bathroom Faucet - Dual Knob Handle - Parchment # 277-000042 will allow you to unscrew the spout to access that screen for cleaning. | can you remove and clean screen on this faucet? | The RV Bathroom Faucet - Dual Knob...

All other hardware (bolts, nuts, knobs, etc.) would have to be either purchased through Brophy or if it's not too damaged you can take it your local hardware store to find replacements for much cheaper than going through a manufacturer and paying for shipping. |

Also, you can position this bracket a couple of different ways so you can have the knobs pointed in different directions depending on how the bracket is oriented. | I have a 2016 Jeep Wrangler with a Mopar Trailer hitch? Will...

The RV Bathroom Faucet - Dual Knob Handle - Parchment Item # 277-000042 is a 1/2" water inlet so you'll just want to measure the inner diameter of your current faucet to make sure it's the same size. | Would you happen to know...

You cannot put a shank adapter like the # 853-7489 on the # TH23JV because of the locking knob system that keeps the shank firmly in place in the shank when installed. | Does this work to adapt a 1.25 T2 Pro XTR? Item TH83JV...

If your rack uses a standard hitch pin or a threaded hitch pin this should work well for you, but if it uses a different style of attachment like a tightening knob that pins the rack into the hitch this probably wouldn't work well. |

So long as the dimensions are the same and your inlet shanks are the same type, the RV Shower Valve w/ Vacuum Breaker - Dual Knob Handle # 277-000046 should be a great replacement for your current valve. | Would this fit as...

For starters, RV faucets such as the Patrick Distribution RV Kitchen Faucet # 277-000404 will typically use fittings beneath the knobs/handles that are made to be compatible with the hoses that are standard in RVs and 5th wheel trailers. |

The switch housing (not including the knob) is about 1-1/4-inches deep so you'd want to use hardware that is about 2-inches long. | Regarding the Marine 2-Position Battery Switch: Im looking for a surface mount switch to disconnect...

RV Tub and Shower Diverter Faucet w/ Vacuum Breaker - Dual Knob Handle - Parchment..... hello is this the right suitable part to replace a faucet/ tub/shower for a 2006 cavalier fema trailer. just wanting to make sure. thank...

The Apex XT has a SnugTite so you can install and remove the rack simply by turning the knob, and at 35 lbs is 8 lbs lighter than the Curt # C18065. | Is this hitch rack quick and easy to install and remove? It would not stay...

When the bike rack is fully ed into the Draw-Tite receiver on my 2016 Subaru Outback the knob to release the swing arm hits the bumper. The Draw-Tite has two holes. | When the bike rack is fully ed into the Draw-Tite receiver...

This unit can produce 144 gallons of hot water an hour and has a thermostat that will allow you to change the temperature by the degree instead of just a knob with an arrow saying hotter or colder on it. | Hi, I am looking...

This rack allows for tool free installation, if you turn the knob you tighten the rack in the hitch receiver and eliminate any movement between the rack and your hitch receiver. | I have a 2018 Jeep Wrangler and just had a...

The NV 2.0 can be tilted down - even with the bikes loaded - with the press of a handy foot lever; it does not require any tools to install into your hitch as you'll only need to turn a knob to tighten the shank in the hitch and this also works as an anti-rattle device for a quiet ride. |

We used to carry the Yakima SwingDaddy that you mentioned and it had a distance of 6 inches from it's pin hole to the back of the knob for the swing mechanism. So you'd most likely have some contact there. | Weve got a hitch...

So I would use wheel locks and a coupler lock such as # FA86-0015-318 as an example (there are many types of coupler locks) similar to how a door might have a lock at the knob and a dead bolt lock. Now, if only the tow vehicle was that secure. |

If you are thinking about going that route, I highly recommend taking a look at the Kuat Beta # B202-114 which weighs less than 13 lbs and has dual-strap cradles along with an anti-rattle hand knob. When using a hanging rack it's possible you'll need a bike frame adapter bar, # 64005, if your bike is dual-suspension, has a step-through frame or you want to carry a small children's bike. |