Result: knobs

If your volume knob still will not function there must have been something which broke inside the knob which is not allowing it to function. | We have a Jensen AWM 97o in our RV and my granddaughter played...

Press the ENTER knob to access the minute adjustment. Press the ENTER knob again to save the clock. | Im looking for a manual on how to set the clock on this radio | Here's what the manual states for setting...

If you need to change the clock from military time to US time, do the following: Press power button Press the volume knob until area/country setting apprears Turn the volume knob to USA 1 Clock should now be off military time If you want to upgrade your stereo because this stereo is obviously not very user friendly, I recommend the Jensen # JWM60A which is in my opinion a superior system in every way. |

Good morning - this item may be the replacement I need for an 05 Gulfstream BT cruiser - the only difference are the two white protruding knobs on the back which mine doesnt have. Can you tell me if these are important and whether this part will indeed work? |

I have 2016 forest river wildwood camper yesterday radio worked perfectly fine today volume now does not work??? Any ideas? | RV stereos aren't always the most reliable. Sometimes they develop bugs that require a hard reset to get working again....

Hey Danny, there should be a very small button on the front panel of your Jensen 3010x stereo typically under the volume knob that is the reset. But I would first check to make sure the antenna hasn't worked itself loose on the back of the stereo. |

If you wanted to, you could even take it a step further and use the Mounting Panel for Redarc Tow-Pro Trailer Brake Controller Control Knob # 331-TPSI-002 to really tie it all together. | Hi Guys. I have a 2021 Ford E450...

This would allow you to use a trailer brake controller like the Redarc Tow-Pro Liberty Brake Controller # RED24FR, which is going to have a sleek control knob instead of a big bulky controller. You will need the Universal Wiring Harness for Redarc Tow-Pro Trailer Brake Controllers # RED69FR for installation and can use the Universal Mounting Panel for Redarc Tow-Pro Trailer Brake Controller Control Knob # 331-TPSI-001 to provide a more factory like appearance. |

When installed, only a control knob is exposed, getting rid of unnecessary bulk and creating a slick look. | I have a 2020 Dynamax Isata 3 24FWM motorhome that is on a 2018 Mercedes 3500 chassis. I would like your suggestions...

If you turn the control knob all the way to the left just past where the straight line matches up with that diamond shape the back will come off. | How do I replace the bulb in 03001175B? I do not see any disassembly screws....

The reset button is located below and slightly to the left of the volume knob. Most of the time that is effective in clearing up the problem. | Does this stereo have its own fuse? If so - how do I access? | The Jensen # JWM70A...

This brake controller has the smallest footprint on the market to give you more mounting flexibility. With just the knob showing it will also give you a factory look just like your OE brake controller. | I am considering the...

Technically you could adjust the output voltage on any brake controller down to 6 or fewer volts (by adjusting the gain or power output knob) and it will work with the 6 volt brakes that you have without having to add any additional parts or a separate voltage regulator. |

I couldn't find any info on a part number JHD1635B, but here's a full list of the specs on the part # JHD1635BTB: Bluetooth streaming audio with hands-free calling SiriusXM ready 7-Channel NOAA weatherband with S.A.M.E technology Front and rear USB input USB 2.0 for playback of MP3 and WMA audio files iPod/iPhone ready via USB Front and rear AUX input Pre-amp out Amber backlit control panel buttons 12/24-Hour selectable clock with supercap 30-day power backup Encoder knob volume control Beep tone confirmation Equalizer presets - Flat, rock, pop, classical, and custom Low battery alert Non-volatile memory Preset tuning Channel lock 12-Volt DC power Maximum power output: 180 watts Overall dimensions: 7-3/8" wide x 2-1/4" tall x 6-3/4" deep 1-Year warranty |

In the future when you do need a trailer brake controller, I highly recommend the Redarc Tow-Pro Elite Brake Controller for Tekonsha Harness part # RED63RR with Mounting Panel for Redarc Tow-Pro Trailer Brake Controller Control Knob part # 331-TPSI-002. |

I have attached a picture to show the little hook/knob set-up. | My trailer light lens is marked J 2024 on the top portion of the lens cover and DOT ASTI 96 on the bottom of the lens cover. Can I just replace the bulb or do...

Its like they were designed to cover the front door knob of Ft. Knox?? But were spoiled - we still have a 2005 Arctic Fox truck camper, and several years ago when I replaced the incandescent bulbs with soft white LEDs, I removed the milk white lenses with only a soft squeeze and simply twisted the bulbs out and in. |

So I would use wheel locks and a coupler lock such as # FA86-0015-318 as an example (there are many types of coupler locks) similar to how a door might have a lock at the knob and a dead bolt lock. Now, if only the tow vehicle was that secure. |

When your Silverado 3500 owner's manual refers to the transfer case and its neutral position this refers not to the column shifter but to either a floor-mounted manual shifter or to the dash-mounted electronic transfer case control knob. Both will have 4WD high and low settings indicated by up or down arrows and both will have a neutral position. |