Result: Tail Light plug

could add to this kit so I could just plug it in by the left tail light bulb? | 1991 Acura Integra sedan In reference to # 119175KIT Do you sell a trailer light connector I could add to this...

The trailer wiring harnesses for the 2006 Acura TL, such as # C56231, plug in line with the tail | hOW TO INSTALL WIRING HARNESS 2006 ACURA TL? | The trailer wiring harnesses for the 2006 Acura TL, such as #...

Light Converter with Install Kit # 46255. This harness plugs into your vehicles tail light assemblies | Ive owned some cars that you can physically install a hitch, but for...

, or is everything done with the plug in connector from the factory tail lights? Thanks | On a 2021 Acura RDX ASPEC does this wiring require a fused connection from the battery, or is everything...

, make sure that your MDX has a 4-Way trailer connector to plug the light kit into. If you need to add | I had submitted a question regarding the appropriate Brake Light kit for this carrier and was advised...

the tail lights and then you must run a power wire up to the battery but aside from this it's an easy | What part number do I need for the trailer harness for the 15 Acura TLX? | The trailer wiring harness...

for this kit is part # 119178KIT. The converter would attach to the existing tail light circuits in your | I am looking for a Trailer Hitch Wiring kit for an Acura Integra 1991. I see 94-00 listed everywhere...

, there are some vehicles with all-red tail lights that can also require a converter. A wiring harness | What is the black colored converter box located between the vehicle side plug and the trailer plug? What...

2992 and a buddy to test the wires going to your tail lights. You'll need to find the wire that has | I have a 2019 Acura mdx and installed a 4 pin modular kit. my trailer is 5 pin and I need a 5 pin tow vehicle...

, make sure that your MDX has a 4-Way trailer connector to plug the light kit into. If you need to add | Please confirm whether this will work with my Curt Cargo Carrier - C18132. Additionally, would you advise...

. The converter protects your vehicle wiring by only using approximately 5 milliamps of power from the tail light | Is this wiring harness compatible with the vehicle, hows it mounted on the trailer or loose??...

is the piece of the interior that you would remove if you were trying to replace the tail light bulb | I cant find it on my Acura TL Types S 2003 Thanks in advance. | The OEM connector that you need to find...

The Curt Powered Tail Light Converter # C59236 will provide you with a 4-way flat trailer | I just bought a Curt Trailer hitch for 2024 Acura MDX, and I need the wiring harness. What is the correct product...

is involved with the installation of this receiver. I recommend installing the Curt Powered Tail Light | Can I install this hitch on Acura MDX 2024 A spec without removing the bumper | Yes, the Curt Trailer...

that will plug right into a factory port inside the trunk behind the driver side tail light. This allows | I would like to buy a trailer hitch for my 2001 Acura 3.2TL. I also need the wiring...

's junction box behind the driver's-side tail light and the included fuses will be inserted into the correct | In the Q and A you say: If your 2014 Acura MDX did not come with the factory tow package then you...

will want to install the Powered Tail Light Converter # C59236 when you install the receiver. This will give | Which receiver do you recommend for my 2024 Acura MDX? | I recommend our etrailer Trailer Hitch...

or simply installed inline with the tail light/brake light wiring? Thanks. | Does the foot operated remote tailgate opener have to be moved when installing the C22HR? Also, does the plastic...

to the vehicle tail light wiring and from the connection to the vehicle battery. No additional relays are needed | When I ordered this, I didnt notice the comment that you may need to purchase a relay from...

Acura MDX but you can pretty simply hardwire a brake controller to the pig tail that you have found. You | Hi there I have a 2013 Acura MDX and have the factory-installed tow wiring. I have factory 4-pin brake controller pigtail...

turn/brake signal, the brown wire to the tail lights, and the red wire to the stop light. You will then need | 2004 Acura TSX trailer wiring harness, do you have one that has connectors and...

ok but the wiring harness will not work on the driver side tail light or signal light. The MDX tail | I purchased a hitch and the above mentioned wiring harness for my 2005...

hitch and wiring harness, as well as the factory pig tail for a controller. I was hoping you might | I have a 2009 Acura MDX and Im looking to get an electronic brake controller. I have a factory hitch and wiring harness,...

need is a 4-way connector. If your Acura didn't come with one you will want the Curt Powered Tail Light | My 2024 Acura MDX needs a 7-way connector. I don't see one so I am hoping you can help! Thank you |...