Trailer Wiring Installation Instructions for a 1991 Acura Integra

Updated 03/07/2011 | Published 03/04/2011

Question:

1991 Acura Integra sedan In reference to # 119175KIT Do you sell a trailer light connector I could add to this kit so I could just plug it in by the left tail light bulb?

asked by: Dave

Expert Reply:

The only available trailer wiring option for your 1991 Acura Integra would be the Upgraded Circuit Protected Taillight Converter Hardwire Kit, # 119175KIT. There is no T-one plug and play style harness for your vehicle. Installation of the 119175KIT is actually pretty easy, even with little experience.

I have included a couple of videos showing typical installations of this wiring harness. Basically, all you will need to do is to access the wiring behind each tail light. Using the included circuit tester, find the wire behind the left tail light that carries a signal in unison with the left blinker and attach the yellow wire on the harness.

Then, you would do the same for the brake light (red wire), running lights (brown wire), and attach the white wire to a bare metal surface in the trunk area. Route the green wire to the right tail light and attach it to the wire that carries a signal in unison with the right blinker. Put everything back together and you are done.

expert reply by: Michael H