Result: Brake Controller with Wiring

Controllers, part # 3027-P This brake controller comes with a custom wiring harness. It is a proportional | Will this fit my 2006 Itasca Meridian Motorhome freightlinger chassis...

The Bluetooth range of the Curt Echo Mobile Trailer Brake Controller part # C51180 is right around | What is the bluetooth range? | The Bluetooth range of the Curt Echo Mobile Trailer Brake Controller part #...

The Tekonsha Prodigy P2 Trailer Brake Controller # 90885 sends an electrical signal for activate | I purchased a used 2014 Itasca Suncruiser 32H and setup my 2021 Jeep Wrangler to tow behind. I had a Demco brake...

into the taillight housing. This will splice into your taillight wiring to allow your tow vehicle to control | I have a 2014 Itasca Cambria Class C, 29.5 ft, Motor home with the F450 Super Duty chassis with...

adapter, which has separate circuits for turn signals and brakes. I want to convert this for a tow vehicle | I have a 2008 Navion IQ on a 2007 Sprinter Chassis with the Winnebago installed 6 pin round trailer adapter, which...

right into your current wiring and allow you to use your current controls and wiring connectors. If you | we have a 2011 itasca merian V 34y it has two heat pump/ air conditioners, the rear...

The 7-way on your motorhome already has the turn signals and brake lights combines on the same | I want to use a tow dolly MH has trailer tow package seven pin do i need powered converter to get my dolly lights to operate....

I’m actually thinking of using a RVI3 aux brake unit with a wireless again less wiring breakaway | I’m actually thinking of using a RVI3 aux brake unit with a wireless again less wiring breakaway. Since it ,or...

Chill part # FR42PV which was designed to replace a Coleman Mach setup using the same wiring connections | Im confused, but it may not be etrailers fault. My RV currently has a Coleman Mach air conditioner that is no longer...

that will mount correctly and keep all control functionality? | My Coleman Mach 8, model 47054A879, has failed. Do you have a direct replacement option that will mount correctly and keep all control functionality? | We do have...