Result: surface mount reverse light

Currently my fifth wheel has no back up lights only having the factory surface mounted brake/tail | Currently my fifth wheel has no back up lights only having the factory surface mounted brake/tail...

DB. This is a surface mount unit that wires into a reverse light wire. You can mount it underneath | do you have one | The 2008 Kia Sportage uses 921 reverse...

We carry 2 alarms that fit in the light socks of the reverse lights. One is # HM20101VA that you | Do you have a back up alarm for my 2008 Toyota Highlander Hybrid? I purchased your HM20101...

alarm will simply wire into your Tacoma's reverse light circuit and can be mounted to the location | Do you have a backup alert bulb2 for a 2008 Toyota Tacoma? A white bulb that makes an audible...

mount to the underside of the bumper and will wire into the reverse light circuit of your Astra. | I was wondering if you could tell me if the backup light with alarm would fit my 2008 Saturn...

. If it does, then you can use the alert. If not, I recommend going with the Surface Mount Back-Up Alarm | I have a 2008 Silverado and I was wondering if you have a backup alarm alert light that will fit it?...

wire is the reverse light wire, if you have reverse lights on your trailer. I have attached a couple | Hi, so my outback has a 4 way connection already. So if I install the...

lights to work in reverse. | Im looking for a 5 pole connector with mount for my vehicle and trailer so I can hook up backup lights to work in reverse. | If your 2008 Ford Super Duty came with the factory installed...

such as # PK41820. You can mount one on the underside, rear of the vehicle and tap into a reverse light wire | Need to know the size 2008 Jeep Patriot | The reverse light bulb type for the...

Surface mount LED utility light # UCL19CB might be a good option for you. It is a surface mount | I am replacing my running board lights and mounting plates,...

What is the spacing for the surface mount bolts on the 2823283 trailer tail light? | What is the spacing for the surface mount bolts on the 2823283 trailer tail light? | The spacing for the...

The reverse lights on your 2008 Toyota Highlander use a 921 bulb so backup alert # HM20100VA | Do you have a Back Up Alert Recommendation for 2008 Toyota Highlander Hybrid | The reverse lights on your 2008 Toyota...

view camera, we will want the Rear View Safety Backup Camera - Surface Mount, # RVS-776. Don't | Could a second camera be added for the front / I have Dodge Ram hard to see pulling into a spot would like to...

was wondering if there could be a way to wire these up for reverse light and if it would be possible to add | Good morning. I have a 08 Toyota 4runner with the factory installed towing/light package. I was...

For what you are looking for a surface mount light like the part # STL43RBX would probably | Ive already asked a similar question and now need a follow up. I want to mount the lights STL101RB...

tie the power wire directly to the reverse circuit of your vehicle through the trailer connector | I am looking for the brightest utility light I can mount to the rear of our trailer for low light backing. We need as bright...

is for the taillights. This rack does not have reverse lights but if the rack you have does have reverse lights then you | Hello. The headache rack installed on my 08 Ford...

will be connected to the brake controller. The Purple wire can be connected to the reverse lights if the trailer has | I have a Pathfinder SE 2008 with 4 pin not a 7 pin factory plug. Please advise how to...

should note that the reverse light function will be missing as the 004 does not have that portion | Hi, my trailer tail light works fine but the license plate tab on the tail light mounting plate broke. I...

to be spliced into the vehicles reverse light circuit. You can use the provided quick splice or any other | Can you use it on a 2008 ford edge? Thanks. | As long as your 2008 Ford Edge has a 4-flat trailer...

is for reverse lights. If the trailer does not have reverse lights, you can tape up this wire and stow it out | I have a 2008 Ford Explorer with an OEM 4 way tow package. ...

that I would like to add reverse lights to but, I still want to have the 4 flat pin connection as another | Hello: I have my tow vehicle wired with a 4 flat and 7 way. I have a trailer that uses a 4 flat that...

The Gustafson RV Puck Light - 3" - Surface Mount - 12 LEDs - 3 Watt part # 277-000342 is dimmable | Some LED lights are dimmable and some are not, are theses dimmable? | The Gustafson RV Puck...

surface. The taillights, too, should be grounded to a clear, bare metal surface. Most trailer lights | 2008 isuzu NPR to trailer. All lights and functions work Except Trailer Brake lights. Blinkers...