Result: anchor

Hey Corry, you would basically want to mock up the Terran Industries Tandem-Axle Hanger Kit #TX85VJ with the 26-5/8 inch springs that you have and have the springs temporarily mounted in the hanger and the equalizers to get the correct dimensions to…

To replace your Greystone Electric fireplace model FFP272107 you'd want the 26" Greystone Electric Fireplace with Remote Control #324-000065 as this is basically the same thing as what you currently have but the latest version. It would fit…

Kenda trailer tires are primarily made in China like most trailer tires. The only Radial trailer tires that I'm aware of that are made in the United States are the Goodyear Endurance line. Carlisle has a bias ply line of tires made in the States,…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

The Club Tire Claw XL Wheel Lock #WI491KA-491LNP is for security and while it technically can stop your wheels from rotating it is not meant to stabilize a trailer to keep it from moving. What you would want instead is a wheel chock such as FloTool…

The bearings your Lippert 5,200 lb axle has are part #LM67048 and #25580 and the grease seal is #RG06-070. For a cotter pin you'd need just the #165649.

Thanks for the picture of Curt Q25 handles you need. Based on that the correct replacement is the part #C38UR.

From the parts you recently looked at, it looks like you are asking about anchors for a curt fifth-wheel hitch. If you have a 2017 Chevy Silverado 2500, the part that works with a fixed hitch is the Replacement Anchors for Curt 5th Wheel Hitches for…

Hello Wayne. The correct replacement anchors will depend on what Curt 5th wheel hitch you have. The #C93UR anchors are for the fixed Curt hitches and the #C53UR anchors are for the slider 5th wheel hitches. If you can tell me what hitch you have, or…

The BTR and BT8 denotations refer to the spindle, not the trailer hub. The difference between a BTR and BT8 spindle is that the BTR spindle uses a 1.063" diameter L44649 bearing and the BT8 spindle uses a 0.99" diameter L44643 bearing. In…

The correct set of replacement Curt A25 anchors just depends on what vehicle you're needing them for! Here are the different options: - Ford Anchors #C98UR - Ram Anchors #C68UR - Chevy/GMC Anchors #C93UR Let me know if you're needing anything…

I do not recommend using a leaf spring spacer (lift block) on your trailer. The reason for this is because they can cause the trailer to become extremely bouncy and rough which is just going to put more stress on your suspension and wear out the…