Result: Step Support

You are correct, your 2009 Dodge Ram 1500 does have a bumper support at the back that attaches to each frame rail with a support in the center that rests under the step bumper so you can place a hitch ball. |

The Bully Black Bull LED step hitch cover # BBS-1104L does not come with a hitch pin. | Does this come with the 5/8 bolt to secure the step to the receiver? | The Bully Black Bull LED step hitch cover # BBS-1104L...

It is rated for a tongue weight up to 500lbs with a maximum trailer weight of 5,000lbs or a line pull or 9,000lbs. Do be sure to get a cover like the Draw-Tite QSP Trailer Hitch Silencer and Cover # 63080 or I prefer to use a WeatherTech BumpStepXL Hitch-Mounted Bumper Protector and Step # WT81BS1XL to eliminate the whistle that is caused by the front receiver tube. |

I attached pictures that cover that step for you to check out as well. | Bought trailer hitch for 2018 chevy equinox. The hitch says it fits diesel, but the instructions dont take into account the box in the...

I spoke to my contacts at Curt and Reese and the only styles of hitches that can be made to fit a service body truck like your Fedex step van are multi-fit RV hitches like the # 41990 that has a 16k capacity....

So a few options there and we got you covered! | Do you know the distance width of this hitch from bolt hole to bolt hole? My frame on the trailer is exactly 46inch from the inside edge to inside edge. | When looking at frame...

The Curt Class III Trailer Hitch, # 13333, is designed to bolt to the round bumper support bar just behind the bumper. Once installed, the receiver of the hitch will sit directly below the step in your rear bumper. |

Within our resources we have step-by-step professional install videos, help articles and lifetime technical support from the experts at etrailer.com. | I have a 2014 Ford Escape that I want...

I am purchasing a new Mercedes 2020 144WB 2500 Sprinter Van with a rear step down bumper. Do you sell a hitch assembly that will accommodate the rear step bumper? | I am purchasing a new Mercedes 2020 144WB...

Their weight capacities are the same, they'd install in the same manner and their build quality is pretty equal. Curt just goes a step further to cover themselves by stating that in order to retain warranty coverage, the # 18050 strap needs to be used for non-trailer loads. |

There is one additional step that is required on your 2013 Chevrolet Avalanche that was not covered in the video with the 2012 Chevrolet Silverado. | I followed your description/video of the 2012 Silverado...

I recommend using either a Draw-Tite QSP Trailer Hitch Silencer and Cover # 63080 or the WeatherTech BumpStep Hitch-Mounted Bumper Protector and Step # WT81BS1. | Hello, Is there anyway...

Im concerned about removing rubber exhaust hangers and supporting the exhaust. Can you provide examples of how to support the exhaust? | I wish there was a video to view, but cant currently find any. Im concerned...

I attached a picture from the instructions that shows this step for you to check out as well. | Will this fit on a 2011 Audi Q5 and is there any cutting of bumpers etc required? | Yes, the Draw Tite Hitch part # 75940 that you...

The receiver opening sits flush with the rear fascia or bumper cover. I have added a link to the instructions below that include a drawing of how the hitch is positioned on the car and a step-by-step instruction list. |

The area on the 2017 Volkswagen Golf SportWagen that needs to be trimmed to install Draw-Tite trailer hitch # 24949 is covered in the instructions which I have linked. I also included a picture showing this step from the instructions. |

The main difference on the Town Car and other vehicles compatible with this hitch is that on the Town Car there are some extra steps that are covered in the instructions. The recommended ball mount for this hitch is # 36063. |

| The first step that you will want to take before attempting to carry your motorcycle is to contact the manufacturer of your motor home to determine tongue weight capacity of the motor home. | I have a motorcycle lift that...

I recommend keeping either a Cover # 63080 or Step # WT81BS1XL in the receiver to eliminate the whistle from the wind front receivers will often create. | Looking to get a front hitch for our work truck Ford...

The area on the 2017 Volkswagen Golf SportWagen that needs to be trimmed to install Draw-Tite trailer hitch # 24949 is covered in the instructions which I have linked. I also included a picture showing this step from the instructions. |

I have even attached an install video for you which walks you though the process step by step. That said, if you still don't feel confirmed you can install the trailer hitch yourself you can take it with you to pretty much any local RV dealer with a service center and they can do this for you. |

I have attached a snip from the installation instructions that explains this step. | when I install the draw-tite on my 2019 Subaru BRZ do i need to remove the rear fascia | The Draw-Tite Sportframe Trailer Hitch Receiver part...

The trailer hitch will install between the bumper beam and the bumper beam supports. This step is also detailed in the video. | I woul like to buy a trailer Hitch for my minicooper 2005 convertible. The weight...

It does reduce the stress on the hitch but the down side is the extra steps it takes to use the strap and that it has to attach to the vehicle. | Im looking for a Class III trailer hitch for my 2018 Subaru 3.6 Outback mainly...