Result: Step Support

Upon reading all the information, I do agree with you and believe the controller to be the issue. For your Replacement Steps, Motor, and Control for Kwikee RV Electric Steps # LC3722615, the correct replacement control module is the: -Replacement Control Unit for Kwikee Electric RV Steps # LC379146. |

The full instructions will come with the cover to give you the step by step installation. | In all the installs I never see the last part where they install the cover. | I assume you are referring...

This is because the handrail will use mounting brackets specific to the TorkLift step design. In order to use this with the electric steps on your Holiday Rambler RV, you would likely need to extend the vertical rail down to the ground with a rubber foot. |

It is specifically designed for the step side model. Great pick in tonneau cover! | Will this model fit a 2000 Ranger xlt regular cab step side ? | Hey, Allen! Yup! The TruXedo TruXport tonneau cover part...

| The Replacement Step, Motor, and Control for Kwikee RV Electric Steps part # LC3747452 comes with the Replacement Control Unit for Kwikee Electric RV Steps part # LC379146. |

From the bottom of the ladder to the bottom of the first step on RV ladder # SP502L is approximately 10 inches. | what is the measurement from bottom of ladder where it attaches to trailer and bottom of 1st...

I have a 2001 Ranger xlt 4 wD 4 door. Step side with flared rear wheel wells. Is this the right cover for me. | I have a 2001 Ranger xlt 4 wD 4 door. Step side with flared rear wheel wells. Is this the...

vehicle: 2004 Ford Ranger Hi i have a 2004 ford ranger edge with the 6ft bed step side/flaired bed the cover Im looking at is the trifold cover that says its for the1993 - 2012 Ford Ranger 6 Foot Bed, Stepside is that the same as the ford ranger edge step side ? |

Here is what I recommend: - Roadmaster Direct-Connect Base Plate Kit - Removable Arms # RM23DQ - etrailer SD Non-Binding Tow Bar for Roadmaster Direct-Connect Base Plates - RV Mount - 6,000 lbs # e74ZR - Roadmaster Smart Diode Kit for Variable Voltage Incandescent Tail Lights - 7-to-6-Way Adapter Cord # RM26FR - Roadmaster Battery Charge Line Kit for Towed Vehicles # RM-156-25 - Demco Stay-IN-Play Duo Flat Tow Brake System for RVs w/ Hydraulic Brakes - Proportional # SM99251 That will cover all the main components. |

Can I buy the Extang cover without the frame? | We do indeed offer a replacement vinyl cover for your 2001 Ford Ranger with the 6 Foot Stepside bed. The part # is # EX1600 is the replacement for your Extang Tonneau # EX2600 |

So this part number is for a 02 ford Ranger step side correct? | So this part number is for a 02 ford Ranger step side correct? | Yes the Pace Edwards Bedlocker Retractable Hard Tonneau Cover # 311-BLF0908 is a confirmed fit...

This installation would not be covered under the warranty. The option that is actually recommended for your vehicle is to add nerf bar steps like # DZ3700301 to assist with entry and exit. | IM DISABLED I...

What is the difference between LO Pro for $120.00 vs a replacement cover $99.95 and does it have the Velcro already attached to the cover and is tx278101cvr the one that fits a 2003 ford ranger extended cab with side steps |

My 2002 ranger has the step side bed, will this still fit? Having a hard time finding fitment specs for the step side beds. | My 2002 ranger has the step side bed, will this still fit? Having a hard time finding...

We have TruXedo brand tonneau covers to fit your 2003 Ford Ranger with 6-foot flare-side or step-side bed, the TruXport # TX247101 and Lo Pro QT TX547101. | Hello - Can you please confirm that Item # TX2471-CVR...

I know the listing says step side tonneau cover but I have to double check. | I know the listing says step side tonneau cover but I have to double check. I have a 2001 Ford Ranger EDGE with a STEPSIDE box. WIll...

Does the Fas-Top cover fit a 2000 Ford Ranger flare side step side 6ft bed? | Does the Fas-Top cover fit a 2000 Ford Ranger flare side step side 6ft bed? | Hey Terry, thanks for reaching out. We do have tonneau...

Does this cover fit a 1998 Ford Ranger Step-side, 2 wheel drive Splashbox? | Does this cover fit a 1998 Ford Ranger Step-side, 2 wheel drive Splashbox? What is the #8740 alternate mentioned and what are the...

I want to set it up to be towed behind RV. | Do you have a kit that will work with a 1989 ford ranger? I want to set it up to be towed behind RV. | We can help you with the items you'll need to flat tow your 1989 Ford Ranger...

For a cost effective tonneau cover that can be used with the above, I recommend the Access TonnoSport Soft, Roll-Up Tonneau Cover part # A22010109 so long as you don't have a step-side bed....

This would be my choice, but if there is not enough overhang, then step down to the Solera RV Slide-Out Awning - 14'1" wide with a 48" projection, # LCV000163302 for white or # LCV000168112 for black, has an actual awning rail width of 169" for a 1" overhang. |

I am looking for a replacement tonnau cover for my 2005 Ford Ranger XLT with 6 foot bed no side step. | I am looking for a replacement tonnau cover for my 2005 Ford Ranger XLT with 6 foot bed no side step....

Hi I’m looking at purchasing a new Ford Ranger - and would like to outfit it with a locking tonneau cover with low/mid height towers and cross bars across the bed and tonneau cover. | Hi I’m looking at purchasing...

I have a 2007 Ford Ranger sport with the step bumper designed for towing from factory. It has the holes for the breakaway chains for towing and a large lip at the front. | I have a 2007 Ford Ranger sport with the step bumper...