Result: wheel stud

Hi Larry! I see you already purchased the Stealth Hitches Hidden Trailer Hitch Receiver w/ Towing Kit - Custom Fit - 2" #SH32TR for your 2024 BMW X5, but I did still want to confirm that this does include all the needed wiring for a 7-way…

Hey David, thanks for reaching out. Yes, the Curt Trailer Hitch Receiver #C82RJ will indeed fit the 2027 Kia Telluride. This hitch is still in the pre-order phase, but it is being going to fit both the 2026 and 2027 Telluride. Right now, we are…

The Westlake 215/75R17.5 Radial Tire w 17-1/2" Lynx Aluminum Wheel #LHAS701 are intended for wheel bolt size 9/16-18 with an 8 on 6-1/2 inch bolt pattern. These wheels with that bolt pattern and wheel bolt size are rated for 4,805 lbs at 123…

We don't have the length of stud you are seeking. The longest 5/8 inch stud we have is 3-1/8 inches. If that length will work, I recommend the Replacement Trailer Hub Wheel Stud, Drive-In, 5/8" x 3-1/8" (Qty 4) #RG03-120. These are a…

The stepped portion of the #RG03-120 is 1 inch long but the actual splines are 1/2 inch. I apologize for the confusion.

Hi Richard, I'm pretty sure they are the same thing, and the issue is mostly rounding (bear with me a second). The wheel studs that say they have a .54 generally have a .545. Technically, that should round up to .55, but not all do for one reason…

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

We do have a compatible grease seal for your 168255TC oil seal, however, we do not carry rubber coated seals in this size. The 168255TC oil seal was designed to work with oil bath hubs on a 3,500 lb axle. For the most part, axle manufacturers have…

We have a wide range of trailer hubs so we can get you all set. Our hubs include bearings, races and seals. The way to select a replacement hub is to match up the bearings to the original hub. A new hub must use the same bearings as the old one in…

Hello again, Corey! We do have a wiring kit available for your 2026 BMW X5 with the Curt Powered Tail Light Converter w/ 4-Way Flat Trailer Connector and Install Kit #C56190KIT, but the Draw-Tite hitch #DT96GR does not have one that specifically has…

Hey Dewayne! Since your 2022 Vanleigh Beacon 41FLB has 8k axles I recommend the DeeMaxx Disc Brakes #DE63AR. Are you converting from electric brakes? If so, you will also need a brake line kit #HS496-252, a breakaway kit #3802308 (if you don't…

A TruRyde rvd-h-865 7k hub/drum like # AKHD-865-7-2-K uses 1/2-inch drive-in studs that are 1-5/16-inches long. For a replacement stud you can use #165981. This is slightly longer at 1-1/2-inches but it has the same 1/2-inch diameter. They are also…