Result: Step Support

Since your door way width at the narrowest point is 30” and your entry height is between 35” to 44”, then the Lippert # LC791575 Solid Step is the best fit. With bigger steps you may want to consider a bigger hand rail support. |

I find this is a great place to store wheel chocks, landing pads and levelers which you need before the steps are folded down and block the storage box. | do I need to remove the old steps to...

Hello- I wanted to know of the Lippert Solid Stance RV Step Support Kit Item # LC96BJ will fit on a 3 step Old Hickory step. | Hello- I wanted to know of...

Attach tech screws through the step supports, 2 (1) each side, to the step supports on the chassis. 5. | Where do they mount and how? | Outriggers such as # LC301704 bolt to...

I had to support the coach steps with a block while I removed the motor. | I had to support the coach steps with a block while I removed the motor. Now that I have the old motor off, I cant...

**MORryde StepAbove RV Steps for 27-3/4" to 30-1/4" Wide Doorways - 4 Steps # MR28RR. | Want to replace our 3- steps with a 4-step system, however, most of the pull out staircases...

Is it recommended or necessary to use leveling blocks under tires on low side of site before using auto level? | Is it recommended or necessary to use leveling blocks under tires on low side...

Other designs include step supports and, if supports are present, steps should be completely backed up against the step supports on the frame (angle or tube). 3. |

I have included a video review of the Lippert Ground Control 3.0 Electric 5th Wheel RV Leveling System for you. | It seems like at the exact 20 ft. Measurement on my Raptor 297s toyhauler is within the rear...

Hey Mary, the Replacement Hanger Block Screw for Solera Awnbrella RV Awning Support Kit # LC386210 is unfortunately sold individually. | Hi: Question about the hanger block screws LC386210....

If you need more than this then you would need to use leveling blocks like the Stackers Leveling Blocks w/ Bag for Trailers and RVs part # A10-0920. | Can I...

The Lippert Solid Stance RV Step Support Kit # LC96BJ is designed to work with steel RV steps with at least 5" ground clearance. | I have a Jayco 5th wheel...

Front Leg - part # LC305340 Right Rear Leg - part # LC344792 Left Rear Leg - part # LC305339 If you need more height for your jacks then you can use the Ultra-Fab Leveling Blocks for Trailers and RVs part # UF48-979051. |

I’d like to double check that the Lippert Solid Stance RV step support will accommodate our travel trailer. | I’d like to double check that the Lippert Solid Stance RV step support will accommodate...

The Lippert Solid Stance RV Step Support Kit item # LC96BJ will work with your Lippert Manual Pull-Out Step for RVs item # LC432678. | Will the Lippert Solid...

| As long as the steps of your 2019 Keystone Cougar 338RLK are made of steel and there's at least 5 inches from the ground to the bottom of the lowest step the Lippert Solid Stance RV Step Support Kit Item # LC96BJ will fit and work great. |

You will need to have at least 2-5/8" of space under your step while it is stowed in order to install and use the Lippert Solid Stance RV Step Support Kit # LC96BJ. | Lippert....

Yes you can use the Lippert Solid Stance RV Step Support Kit # LC96BJ. This support kit will work with steps 5" to 14" off the ground, and measures 22-3/4" wide x 2-5/8" tall x 4-1/2" deep when folded. |

The only brackets we currently offer for RV steps are the Lippert Outriggers for Manual RV Steps # LC301704, which would mount directly to the frame of the trailer. | We have...

The Lippert Ground Control 3.0 # LC358590 is a great system that is pretty much universal and could be installed on your RV, but it will won't be able to extend far enough for your RV to sit level where it is at without utilizing blocks like you are currently doing. |

Since your Lippert Electric Tread Lite Step for RVs # LC353543 is made of aluminum, the Lippert Solid Stance RV Step Support # LC96BJ will not work for you, unfortunately. |

On your 2004 Thor Toyhauler, my tech contact at Lippert Components said the Lippert Ground Control 3.0 Electric 5th Wheel RV Leveling System w/ Touchpad and Remote - 20,000 lbs # LC358590 can have the rear supports mounted in another location but within parameters. |

The issue with the Lippert Solid Stance RV Step Support Kit # LC96BJ being used on quad steps is there just isn't clearance underneath them for how much space the # LC96BJ would take up. |

You need to block the legs, I prefer the Ultra-Fab Leveling Blocks for Trailers and RVs, # UF48-979051. | I have not been able to auto level my open range rv, message out...