Result: fitting

What size is the hole it needs? this will be a new install for me. | Hi Keith, The RV Designer Round Low-Profile Cable Hatch part # RD46GR fits into a cutout that is 3 1/2" in diameter. The overall flange dimensions are 4.6" x 2.6". You may...

Looking to buy RV seat covers. Is $219 For 2 chairs? | Thanks for reaching out Sarah. For something like the Covercraft Work Truck SeatSaver Custom Seat Covers - Front - Tan # SS2422PCTN, the price includes both front seat covers. Keep in mind...

I have a 2017 Thor Windsport model 34 P. Will these seat covers fit. I couldn’t find measurements. | Hey Henry, thanks for the pics! The RV Designer GripFit+ Motorhome Seat Cover item # RD27SR are universal so they should fit but let me get...

What size ball end does this strut fit? | Hey Myrl, the RV Designers Gas Strut part # RD82RR that you referenced is designed to fit 10 mm ball ends. Where are you wanting to install this strut? |

Will your RV Designer Ace Compartment Lock - 5/8inch - Part Number: RD87GR-inch fit on my 2017 Airstream Flying Cloud 751 storage compartment door? | Hi Charles, Unfortunately, there aren't guidelines available to determine the size of your...

Does this wiper fit the 2023 Forest River Georgetown Gt7 36K7? | Hey Rodger, welcome back! Yes, the RV Designer J-Hook RV Wiper Blade # RD32QR will fit your 2023 Forest River Georgetown GT7 36K7. Your motorhome uses 28" wiper blades with a J-hook...

Hello, I see this switch has what i would call spring tabs, so will it fit a cut out of .975 wide x 1.65inch tall? I am trying to find a replacement switch for my awning. My current switch looks identical to this one, but not sure it will fit...

Where does one measure from in order to match our existing cam locks? Thanks | Hey Kendra, you would want to measure from the back of the lock face to the base of the threaded body and the diameter of the hole that the latch fits into to pick...

WHAT SPAN DOES THIS PIN COVER? DISTANCE OF THE STRAIGHT PART OF THE SHANK TO THE COTTER PIN HOLE? iT SAYS FITS 1.5 INCH RECEIVERS THEN IN THE DETAILS PART IT SAY DESIGNED TO FIT 2inch RECEIVERS. | Good morning Tim! The RV Designer Hitch Pin...

Goodmorning etrailer! Goodmorning from Ontario Canada, we hope you can help us. I have looked on your site and am unable to find a solution. We have a 2011 Fleetwood Southwind 32vs Class A and our driver and passenger seats are starting to...

Thor 2016 Freedom Elite. Side entry door. What material is the door latch itself made of? Is it cheap pot metal or steel? I ask because all replacements I have ordered, break inside of three months. Thanks. | Hey Dave. The T5079 RV Designer...

Will this fit the ceiling light in my 2021 Forest River Rockwood Mini Lite? The light over the dinette has the little push button in the middle and looks like it’s about 4-1/2 inches wide. | Hi Carol! We don’t have a database that tells us the...

I’m replacing the coupler on my small cargo trailer and want to order a spare safety pin at the same time. Is there any downside to using the longer RD22GR instead of the shorter RD72GR? | Hi Sheila! As long as your coupler uses a 1/4" pin hole,...

What is the diameter of the slider the male part that fits into the track?? | Hi Michael, The RV Designer Sew-In Carrier part # RD48QR has the following dimensions: -Head is 3/16" in diameter -Post under the head of the carrier is 1/8"...

What is the depth of the RV designer outlets? | The RV Designer outlets like part # RD26FR are 4-1/2 inches long, 2-3/4 inches wide, and 1-1/2 inches deep, measured from the front of the cover plate to the back of the outlet. I’ve also attached...

Hello. I bought a used 2018 Thor Freedom Traveler 27A Motorhome. I need some parts can you assist with with what I need. 1. The slide outs need replacement rubber gaskets that go on the Bottom of each slide out. 2. The plastic piece that...

What is the size of this door lock? Im looking for replacement locks for 2007 Fleetwood Excursion 40E. I need 13 with locks and 1 without a lock. | Hey Karen. The RV Designer Baggage Door Lock item # RD43SR measures 5-1/4" tall x 4-3/4" wide...

Hello, I am looking for some standard on/off rocker swtiches for my 2025 keystone cougar that will fit in the factory cutouts on the control panel. These would be the same size switches as the factory awning and slide out controls. The cutout...

Will this work in a bathroom area in my camper, or is it only for dry ceiling locations? | Good question, Rachel. The RV Designer # RD94SR can be used in a camper bathroom where there’s extra humidity from the shower, but I would not put it...

My trailer coupler has a 1/4" hole for the safety pin, but the latch area looks wider than most of the small pins I’ve seen locally. Is the # RD22GR the longer option? | Hey Terry! You’re looking at the right one if you need the longer span....

Hi, do you have something similar to Curt P/N 55774 but without the extra 4 pin connector? | Yes, we do Andrew! To replace a 7-Way connector that plugs into a factory tow package wiring harness, I recommend the RV Designer Socket item # RD76SR....

I own a Grand Design Image 22BHE. Looking to replace the existing plastic door holder with a stainless steel one. I want it to fit the existing screw hole pattern so I dont have to drill new holes. Please advise. Thank you. | Hey Rich, welcome...

I am looking for the white equivalent to Part Number: CAM25312-10. Its to replace the front corners of my 2013 Denali 5th wheel. If you have a better fit let me know. Thanks | Hey Robert. The Camco RV Vinyl Trim Insert item # CAM25202 is the...

I’ve got an older motorhome and some of the ceiling lights are 12V halogen puck lights. Can I replace one with this LED puck light to reduce heat and power draw? | Yes Stan, if the size and mounting style work for your motorhome, the RV Designer...