Result:

02 v10 excursion stock factory ones are 3 in. long are these longer if not I do not seeing them making a diff. I think air bags would be better? pull enclosed trailer | The Timbren Rear Suspension Enhancement # TFREXC4 for your 2002 Ford Excursion...

I have a 2000 Ford Excursion 4WD V10 and will be towing a 24foot Fishing Boat on a tandem trailer. Which item would be better at keeping my Excursions rear end level, the Timbren Rear Enhancement System TFREXC4 or the SumoSprings Solo Custom...

I currently have a set of Lippert 3500 lb axles V000113211 - LCI35-SB-86.5-68.5-NOSP-OS-L-545-7209-18PT and want to upgrade to 4400lb. Is there a equal in Dexter to look at? | When you are looking for a replacement axle there are a few measurements...

I have a 2005 Ford Excursion with the 6.0, everything on the vehicle is stock. I am pulling a 9,000lb 37’ travel trailer with the husky round bar Weight Distribution Hitch with Bolt-Together Ball Mount/Shank Assembly and Sway Control only 1...

TFF350SD2. Can I assume the ...SD2 is for 2w drive and the SD4 is for 4 wheel drive vehicles. | Yes, you are on the money with the fits. The Timbren Front Suspension Enhancement System # TFF350SD2 is a fit for the 2-wheel drive model of the...

My excursion has f350 leafs on it which gave me 2.75inch of lift. Will the excursion kit still work or will the bushings be too short still causing it to sag before they make contact. | Because the stock ride height has changed, the # TFREXC4...

Do you have the height measured from the spring top to the bottom of the frame for the Timbren TFF350SD4 kit for a 2001 Ford Excursion? Currently I have only 4.5 inches as the springs have sagged. Thanks | The Timbren Suspension Enhancement,...

I have a 2000 Excursion and would like to get #TFREXC4 for the rear. My concern is that the vehicle has been lifted by a previous owner 3-4. I Measured the distance from the bump stop mounting point to the bar that they end up contacting and...

I just bought a 2001 excursion 7.3L 4x4. Has noticeable sway in turns and lots of play in shocks, so I replaced shocks today. Then noticed that the axle bumps stops in the front were gone completely and it still rolls a little in turns. Does...

Want to build heaviest tandem possible w/surge and axle-less susp. complete parts list would be most helpful. | The highest capacity Timbren Axle Less system is the 7k part # TASR7KS01 which can be used on a tandem axle trailer. For brake...

Hi we just bought a new 2017 jayco 32BDSW the dealer installed a reese pro 49902. the trailer dry tongue weight is 855 lbs GVW of trailer is 9000 LBS. I measured our tongue weight via the bathroom scale method and I come in at 1044 LBS tongue...

I have an 02 Ford Excursion 4x4 with front dual Bilstein shocks. Will the Timbrens fit with this application? | The Timbren front-axle jounce spring kit that fits your 2002 Ford Excursion 4X4, part # TFF350SD4, installs in place of the vehicle's...

I have a 2005 Ford Excursion 2 wheel drive that is stock height. I installed a Timbren system on the rear to improve towing and it has helped tremendously. However, Im planning to put an additional lift of 2inch on the rear as it rides low...