Trailer Wiring Harness For A 2018 Chrysler 300S
Im looking at ordering this wiring harness for a 2018 chrysler 300s but there are 2 different wiring harnesses listed for my vehicle which one should I buy and whats the difference | Hi Jamie! For your 2018 Chrysler 300S, I recommend the Curt...
How to Determine Which Ball Mount Will Have Enough Rise for Curt Hitch on a 2005 Chrysler 300c
So I am considering the curt class III hitch #13465 for my 2005 Chrysler 300c. I have seen a previously answered question suggesting the #d-26 ball mount would be recommended to clear the rear bumper. I notice that the D-26 has a lift of 3/4...
Will Trailer Hitch for 2012 Chrysler 300 Fit SRT8
I see you have trailer hitches for a 2012 Chrysler 300. Do they also fit the SRT8 version of the 300? | Hey Jim, welcome back! The Curt hitches fit the 300C and 300S. The Draw-Tite Max-Frame Trailer Hitch Receiver # 76145 is confirmed to fit...
Will The Curt Trailer Hitch Receiver # C13236 Fit A 2019 Chrysler 300
Is the c13236 hitch fit my 2019 chrysler 300 6cyl with dual exhaust | Hey Ken, Yes, the Curt Trailer Hitch Receiver # C13236 is listed as a fit for all models of the 2019 Chrysler 300 so it would be a fit. If you plan on towing a trailer or...
Availability of Tire Chains for 17.5L-24 Tractor Tires for Kubota MX5100
hi do you have chains to fit my 17.5L-24 tractor tires? not sure how to use your search tool for this application - kubota MX5100 4wd thanks | Hi Glenn; we do have tire chains that for your 17.5L-25 tires on your Kubota MX5100. The search...
Finding Installer for Curt Hitch on 2009 Kia Rondo
A Curt Trailer Hitch Receiver for a Kia rondo 2009 what car brands aré compatible to install the tráiler Hitch | Hey Adrian, I attached a link to an installer locater that you can use to find someone to install the Curt hitch part # C11031 on...
Parts Needed to Add Brakes to 1992 Coleman Arcadia Pop-Up Camper
I want to add brakes to my 92 Coleman Arcadia pop-up. I am looking for the correct hub/drum and electric brake assemblies. The wheel bolts are 5 on 4 1/2 and the tires are Carlisle USA Trail 20.5x8-10. The current axle includes a square flange...
3 Bike Platform Bike Rack Recommendation for 2007 Chrysler 300
I am looking for a hitch mount platform bike rack that can hold three bikes. I have a 2007 Chrysler 300. Can you recommend a product for my needs? Thanks! | For a 3-bike platform rack the Kuat Transfer part # KU24FR would be a great option....
Measuring for Trailer Hitch Receiver Ground Clearance on a 2013 Chrysler 300
I am looking at either the Drawtite 76145 or Curt C13093 receiver for my 2013 Chrysler 300. It appears that the receiver clearance from the ground is more on the Drawtite than the Curt. I couldnt find any specific dimensions from the frame...
Replacement Jack For 2001 Stratos Bass Boat Trailer
I have a 2001 Stratos Bass boat with a Fulton center bolt swivel jack onto a welded plate on the trailer. I would like to upgrade to the Fulton F2. My holes on the plate are 3X3 on center. Will the F2 work? Can I send you picture? Thank You...
Does The GE Appliances RV Refrigerator GE58FR Come With A Mounting Bracket?
Does this with mounting brackets? | Hello Raymond, thanks for reaching out. The mounting brackets are not included with the GE Appliances RV Refrigerator # GE58FR. It requires a GE approved top bracket part BMT-GPV10. This is not something we...
Installation Instructions for Wiring a 2008 Volkswagen Rabbit to Tow a Trailer
My question is about the electical hook-up. Can I splice a 4-flat connector directly into the wiring harness, or do I need some kind of powered module dure to the fact that it6 haqs LED lights? | Due to the MX (Multi-Plexed) wiring system on...
What is the Battery Life for Hopkins Wireless Magnetic Tow Lights
What is range of battery life for these lights? The check battery level indicator light every 2 hours statement has me concerned. I drive for much longer stretches than that and dont wish to carry excessive spare AAs or replace them every couple...
Why is a Stabilizing Strap Recommended on Curt Hitches and what is Meant by Non-Trailer Load
What is meant by stabilizing straps for non-trailer loads? | Non-trailer loads are hitch accessories like bike racks and cargo carriers. Basically anything that is not a trailer that you could put on a hitch. Curt recommends you use a Curt Trailer...
Correct Trailer Hitch for a 2013 Chrysler 300S
What trailer hitch fits my 2013 Chrysler 300s | The trailer hitch options for 2013 Chrysler 300 are all compatible with the S models. I recommend going with the larger 2" opening due to the higher capacity and abundance of hitched mounted accessories...
Recommended Roof Rack for a 2013 Chrysler 300
Hi! I have a 2013 Chrysler 300 with no rails or crossbars. Also no sunroof of any kind. It is a naked roof : I was wondering which roof rail system works best for this vehicle and which accessories would allow to carry two kayaks. Thank...
Tire Chains for an ATV with 25x10x12 Tires
Are cable chains available for Kubota SUV... 25X10.00-12NHS | While we do not have cable chains for ATV 25x10x12 tires, we do have low-carbon steel V-bar chains for them. They are the Titan Chain ATV Snow Tire Chains - Ladder Pattern, part...
Recommended Trailer Hitch Receiver for 2011 Kia Rondo
I am looking for a trailer hitch for my KIA Rondo 2011. Do you guys have anything for this models Thanks | For a trailer hitch that fits your 2011 Kia Rondo we have the Draw-Tite Trailer Hitch Receiver # 36525. This is a custom fit Class I...
Towing Capacity of 2006 Chrysler 300 V6
I got a Chrysler 300 Limited with a 3.5 liter v6 I was wondering how much weight you think I can tow. Thanks | From what I was able to find on your 2006 Chrysler 300 V6 it looks like can tow up to 1,000 lbs. To tow you'll need a hitch like...
Is Trimming of the Foam Absorber Required for the Curt Hitch On a 2010 Mini Cooper Convertible
have a question about hitch and hard form . I removed the bumper today for preparation for hitch installation. The bumper has the hard foam but it is wedge between the front and back metal bumper with a full metal back hard foam cannot be...
Trailer Hitch Recommendation for a 2007 Kia Rondo
I am looking for a trailer hitch for a Kia Rondo that was manufactured in Dec, 2006. I dont see one in your listing earlier than 2007. Thank You | That is because you most likely have a model year 2007 Kia Rondo that happened to be built in...
What is Tongue Weight Capacity of Draw Tite Hitch 76145
I was wondering if the draw tight Max frame trailer hitch would support a 400 lb power wheelchair on the rear of a 2014 Chrysler 300. | The Draw Tite hitch part # 76145 that you referenced which fits your 2014 Chrysler 300 does have a 675 lb...
Trailer Hitch is Rated Higher than Towing Capacity of 2005 Chrysler 300 with 2.7L V6
I own a 2005 Chrysler 300 with the 2.7L V6 engine. The only specs I could find says it has a max towing capacity of 1,000 pounds, but this hitch says it holds up to 3,500 pounds. Even the larger engine 300s only say their capacity is 2,000...
How to Prevent Exhaust Components from Contacting the Trailer Hitch
I purchased the replacement CURT trailer hitch hardware from eTrailer for this hitch and installed the 11074 on my 2009 4DR Rabbit. However - after install, I now experience a lot more noise at low RPMs. Theres vibration being transmitted back...
Filter Your Search
Contact and Help