Recommended Tire Chains for a 2023 Rivian RS1 275/50 R22
Hello, I’m looking for low profile 16mm or smaller snow chains/cables for my 2023 Rivian RS1 275/50 R22. Would these work? Thanks! | Hey Julie, thanks for the information and the picture! I checked with Rivian and we've only got one set of tire...
Where Do You Measure From On The Trailers Coupler to Install The Pole-Tongue Adapter # EQ95-01-5950?
For the tongue pole adaptor, you mention in the video that it need to be install between 27 to 32 inches from the reveiver in the tongue. Do we mesure from the tip of the receiver or the middle, because if I mesure from the tip of the receiver...
Would Thule Hullavator Work With Rivian R1S OEM Roof Rack?
Im trying to install the Thule Hullavator on a Rivian R1S. I already have the Rivian Cargo Crossbars so Id prefer to use these if possible. The Hullavator requires the crossbars to overhang and the Rivian Crossbars dont. Is there a way to stackinch...
Will etrailer Spare Carrier # e98ZR Work with Rivian R1S 20
Does this fit a rivian r1s 20 inch all terrain tire? 275 / 65 / R20 | Hey John, yes the etrailer spare tire mount part # e98ZR that you referenced will work with the wheel and tire Rivian R1S 20 inch all terrain tire that you referenced. |
How to Tell if Power Mountain Tallboy Off-Road Bottle Jack Will Work with a 2023 Rivian R1S
what jack can you recommend for changing tires on my Rivian R1S 2023 and Intech Sol Dusk Rover off road package travel trailer? Will the Tallboy pm34fr work with a Rivian puck? | Hey Darin, thanks for reaching out! The Power Mountain Tallboy...
Can the CE Smith U Bolt # CE15253A Be Used to Mount the CE Smith Offset Spool Roller # CE32150G
I would like to know if your U bolt part # CE15253A will work with this part # part # CE32150G I would like to use the above U Bolt to bolt to a 3X3inch trailer tongue with part # CE32150G Thanks for your help | The CE Smith U-bolt # CE15253A...
Replacement Jack For 2001 Stratos Bass Boat Trailer
I have a 2001 Stratos Bass boat with a Fulton center bolt swivel jack onto a welded plate on the trailer. I would like to upgrade to the Fulton F2. My holes on the plate are 3X3 on center. Will the F2 work? Can I send you picture? Thank You...
How Does Roadmaster Even Brake System Know When to Apply Brakes on Towed Vehicle
Have a used evenbrake and 2nd vehicle cue kit. What tells the evenbrake when to brake? | The Roadmaster Even Brake Supplemental Braking System # RM-9400 features an inertia sensor that activates the towed vehicle's brakes based on deceleration....
Recommended Roof Rack for 2010 Dodge Caliber
Hi I have a Dodge Caliber 2010 and I would like to buy a sport roof rack. | I recommend using the Inno Roof Rack Kit for Dodge Caliber that uses parts # INB127, # INSUT, # INK555 which will give you a nice roof rack at a good price. The Inno...
Does The GE Appliances RV Refrigerator GE58FR Come With A Mounting Bracket?
Does this with mounting brackets? | Hello Raymond, thanks for reaching out. The mounting brackets are not included with the GE Appliances RV Refrigerator # GE58FR. It requires a GE approved top bracket part BMT-GPV10. This is not something we...
Installation Instructions for Wiring a 2008 Volkswagen Rabbit to Tow a Trailer
My question is about the electical hook-up. Can I splice a 4-flat connector directly into the wiring harness, or do I need some kind of powered module dure to the fact that it6 haqs LED lights? | Due to the MX (Multi-Plexed) wiring system on...
What is the Battery Life for Hopkins Wireless Magnetic Tow Lights
What is range of battery life for these lights? The check battery level indicator light every 2 hours statement has me concerned. I drive for much longer stretches than that and dont wish to carry excessive spare AAs or replace them every couple...
Why is a Stabilizing Strap Recommended on Curt Hitches and what is Meant by Non-Trailer Load
What is meant by stabilizing straps for non-trailer loads? | Non-trailer loads are hitch accessories like bike racks and cargo carriers. Basically anything that is not a trailer that you could put on a hitch. Curt recommends you use a Curt Trailer...
Block Heater for 2009 Dodge Caliber and Install Location
I need a block heater for my 2009 dodge caliber.... And where does it install on the engine block | You can warm up the engine of your 2009 Dodge Caliber with the Kat's Heaters Custom Fit Engine Block Heater # KH11812, which is the correct fit....
Does Block Heater Install for 2007 Dodge Caliber Require Draining Coolant
I have a 2007 dodge caliber sxt 2.0L where would the KH11812 fit into the engine? Does it go in a frost plug? If it just goes in an opening how does it submerge in coolant? Does the coolant need to be drained for this installation? Please...
Overall Height Measurement From Top of Roller to Bottom of U Channel on DL21741 Roller Bunk
What is the overall height off these roller bunks, from bottom of U channel to top of rollers | The overall measurement from the top of the roller to the bottom of the U channel is 2-1/2 inches. I have provided a photo for you that shows the...
Recommended Trailer Hitch for 2007 Dodge Caliber
Im looking for a trailer hitch for my 2007 Dodge Caliber R/T 2.4L Engine and all I can find is a Class I hitch. Do they make any other classes for my car? The class I will work but obviously the stronger the better. Thank you! | All of the...
Installing a T-One Trailer Wiring Harness on a 2009 Dodge Caliber
Installin on a 2009 Dodge Caliber - I know it should be similar to the Patriot. Any thing to consider? | There is nothing special to consider when installing part # 118552. They are essentially the same vehicle with a different body. How the...
Trailer Wiring for 2007 Dodge Caliber
I have a 2007 Dodge Caliber SX and wish to install trailer hookup wiring. Your item C55050 CURT T-connector vehicle wiring harness suits my needs perfectly. It is my understanding that the 2007 Caliber is the only year with separate rear turn...
Is Trimming of the Foam Absorber Required for the Curt Hitch On a 2010 Mini Cooper Convertible
have a question about hitch and hard form . I removed the bumper today for preparation for hitch installation. The bumper has the hard foam but it is wedge between the front and back metal bumper with a full metal back hard foam cannot be...
Troubleshooting Turn and Brake Lights not Working with Running Lights on, 2009 Volkswagen Rabbit
I have the same problem than the VW GTI guy. After I have wired the kit according to the 2-wire method into my 2009 Rabbit, turn and stop light are working as long as the running light is not on. I have tried also the different 3-wire methods...
How to Determine Correct Ball Mount for Tow Vehicle and Trailer.
I have a draw tite hitch and im trying to get the right size ball mount to fit my trailer and my trailer needs a 2 inch ball | In order to choose the correct ball mount for your tow vehicle and trailer, you will first need to take a couple of...
Trailer Hitch Fit Recommendation for 2007 Dodge Caliber
Bought a trailer hitch from you for my 2015 Hyundai Elantra, works great, however, am buying a 2007 Dodge Caliber, would it be difficult for mechanic to move the hitch from the Elantra to the Caliber? | There's no way to fit a hitch for an Elantra...
Aero Bar Rhino Rack Roof Rack that Fits 2009 Volkswagen Rabbit 5 Door Hatch
Hello, I am looking at RR56RR for my 2009 Volkswagen Rabbit 3 door. Your site says it will fit but when I use the part number RV0230B into rhino racks site it states its only for the 5 door car. Which is correct? I really want these for my...
Filter Your Search
Contact and Help