Result: Boat Loading Guide

The E-Tracks will get installed on the trailer and under each of the three wheels. You will then place the front E-Chocks on the E-Track to help you guide your motorcycle onto the trailer. ...

The E-Tracks will get installed on the trailer and under each of the three wheels. You will then place the front E-Chocks on the E-Track to help you guide your motorcycle onto the trailer. ...

| The height of the chocks that come with the Erickson ATV E-Track Tie-Down Kit w/ Ratchet Straps and Wheel Chocks # EM98CV is 2-1/8" when they are mounted. | how tall do the chocks stand...

At 4500 pounds, the weight of the secured cargo would exceed the combined safe working load limit of 1,100lbs per tire of the straps being used on the Erickson E-Track Tie-Down Kit w/ 2 Ratchet Straps with Roller Idlers and 2 Wheel Chocks EM58523-09162. |

For something similar to use with the Erickson ATV E-Track Tie-Down Kit w/ Ratchet Straps and Wheel Chocks - 1,500 lbs # EM09160, you can use the BoatBuckle Protective Boat Pads for 2" Wide Tie-Down Straps - Qty 2 # IMF13180. |

A more complete option is the Erickson ATV E-Track Tie-Down Kit w/ Ratchet Straps and Wheel Chocks # EM09160. This comes with 4 Wheel chocks and 2 ratchet tie-down straps and is perfect for ATVs, lawnmowers and other wheeled equipment. |

If I use thick and wide washers on each of the bolts underneath, do I really need a backing plate for each wheel chock? | I purchased two sets of the EM09160 in order to secure all four wheels of my 2014 Arctic...

Although we don't have any kits for a 33" tire you can use the 2" x 12' Erickson E-Track Wheel Tie-Down Strap # EM58523 along with the Erickson E-Chock Wheel Chocks # EM09162-2 to essentially create your own kit. |

Since your Polaris Ranger weighs close to 2,000 pounds, I do recommend using two of these sets to secure all four of its wheels to the trailer. This tie-down kit will provide you with 4 wheel chocks and 2 ratchet tie-down straps for securing 2 wheels. |

Each Erickson E-Track Tie-Down Kit # EM58523-09162 incudes 2 ratcheting tire straps with roller idlers and 2 moveable wheel chocks so 1 kit can be used for 2 tires. The safe working load limit for the whole kit would be 2,200 pounds so if the vehicle weighs less than that you would only need 1 kit. |

I also have installed tie down in the floor at woider poaition D rings but they will not hald the wheel chock in any way. There for the e- tracks i will possible use for the chock. | What...

Still only a portion of the tractor's weight would be on a chock so I am not concerned about it being an issue considering the break strength and working load limit of this system (4.5K and 1.5K respectively)....

Hi I have 32inch tires on my SXS. Would like to buy this kit but I do not think the straps included will work. Didnt really want to buy a package and have to throw away the straps they came with. Is there an option to buy the chucks by themselves...

We don't have any E-track ratchet straps that are as short as you are wanting but I have a different solution that I think you would like with the Erickson ATV E-Track Tie-Down Kit w/ Ratchet Straps and Wheel Chocks # EM98CV. You'd mount these on your trailer floor in the same direction as your two ATVs so that you can secure them by just the tires. |

If you also need some wheel chocks that fit in these E-tracks, the Erickson E-Chock Wheel Chock # EM09162-2 make a great addition to your new E-track setup since they fit directly into the Erickson E-tracks and provide a solution to eliminate movement of your UTV. |

Is there something that will hold both front wheels without having to drill separate holes for each wheel chock? | I have a 2025 Ram 1500 Crew Cab without the RamBox. My wife and I haul two...

Does e-track have a removable wheel chock that can be used to stabilize the front tires of the dirt bikes? | I have a 24ft trailer. I primarily use the trailer to haul 2 side by sides and 1 or 2 dirt bikes....

I also use the truck for work during the week and don't want a big wheel chock permanently bolted in the bed. What would you recommend? | I recently picked up a 2026 GMC Sierra 1500 Elevation and I'm trying...

You would not want to rely on the Rack'Em Manufacturing Removable Wheel Chock # RA-17 as a means to balance your Honda Goldwing before you attach tie downs to it. | When properly bolted down in a trailer is...

Another items that we've found very helpful when loading ATVs and UTVs is the Erickson E-Chock, # EM09162-2. | I have a 2012 RZR XP. It has 27-9R-14 in the front and 27-11R-14 in rear for tires. I have put...

It includes 4 wheel chocks and 2 ratchet tie-down straps. I have attached a short video demonstration on this product that you can also check out. | What is the actual capacity? | The Erickson ATV E-Track Tie-Down...

Im looking for something that'll hold the bike upright while I strap it down, but I don't want a permanent wheel chock taking up bed space. Is there a complete setup for my truck? | I have a 2026 Toyota Tacoma...

For securing the front end of a HD dresser that the front wheel is in a locking wheel chock, can l mount the etrack going the width of the trailer instead of parallel to the object being secured. ls tie down strap angle relevent to etrack? |

I have a 2026 Ram 1500 with the RamBox storage compartments and a 5-1/2 foot bed. I'm looking for a wheel chock setup to haul my Honda CRF250R without having to hold it upright while I strap it down. | I have...