Result:

It uses a 30A Single Bank PWM lithium capable Solar Controller. The controller should be set to the AGM setting to get the proper voltage into your batteries to charge them...

My recommendation is the Go Power Solar Flex Kit w/ Digital Controller - 550 Watts - 28.4 Amp # 34275012. | I have a Class A Country Coach Affinity motorhome, it already has two 3000 watt inverters and a transfer...

Both of the above 7-way trailer connectors have a 12 volt power source on one of the pins which can be used to provide a small trickle charge to the battery on your camper. However, if you will be using the battery for any additional lighting such as a light bar and or stop/turn signal lights then you will want to use a battery charger such as the 2.5-Watt Solar Battery Charger part # PTW2997. |

Im hooking up to a trailer the tow vehicle charges the battery on. Will this controller pass 12v from the connector to the trailer battery through this brake controller? | Hi - question on...

The Curt Echo Wireless Trailer Brake Controller # C51180 will work on your 2019 Ford Ranger as long as your trailer brake lights and charge line on your 7-way connector are working properly. | will the echo...

My power tab is at 5 oclock position. The controller goes in upside down. Do u have a solution? | I have the C11580 . I have 2019 Ford Ranger. I cant get it to work. My power tab is at 5 oclock position. The controller...

If you switch the controller over to the user controlled mode by connecting to a trailer or adding your tester to the 7-way. | Bought the recommendation from Ford which is a redarc pro elite for the 2020 Ford...

Why do I not have power on pin 1 have this paired with the curt wireless controller and no power on it either. Have even hooked trailer up put in drive still no power | Why do I not have power on pin 1 have this paired with...

The blue wire goes to the blue brake output wire on the P3, the yellow/red wire is for 12V power and goes to the black wire on the controller, the white wire goes to the white ground wire on the controller, and the white/purple wire goes to the red brake input wire on the controller. |

Confused as to what the blueinch brake controller wiring connection is for. | I am installing the Demco Stay-n-play Duo in a 2021 Ford Ranger your videos on 2019 and 2020 Rangers are the same truck. For my 6pin outlet on the...

I just purchased a Roadmaster Nighthawk 676 with safety chains and electrical cable, to hook up my 2019 Ford Ranger FX4 with adaptive cruise control to be towed behind a Jayco Greyhawk, what are the recommended pieces will I need to complete this setup? |

Can you tell me what I should us to wire the truck for Stop/Signal lights 2. What wiring to charge battery 3. What wiring for Brakes . Can fords EoH electrict/hydraulic be active electrical from RV like electric trailer brakes Thanks |

Push-button tester lets you know if the rechargeable battery is fully charged. You'll want to ensure that your brake controller is compatible with electric over hydraulic brakes. | Im trying to go from electric...

I use a Curt Echo brake controller, but wanted the Aux power to provide some charge to RV battery while towing. | I bought and installed part #5506, mainly to get Aux power from truck battery to 7-blade connector....

For flat towing you'll also need a brake controller, tow bar wiring, and safety cables. I recommend the following: Tow Bar Wiring: Roadmaster Universal Hy-Power Diode Wiring Kit Item # RM-154 Brake Controller: Brake Buddy Stealth Supplemental Braking System - Proportional Item # HM39530 This will connect directly to your battery and charge it as you tow so your battery won't die. |

A battery maintainer/charger like the Roadmaster Battery Charge Line kit part # RM-156-25 which would keep the battery easily topped off so that the issue you described would not occur. | I am looking to set up my new Ford...