Mounting Bulldog Velocity Series Trailer Jack to Trailer with Angle Brackets
The horse trailer this would be going on has a manual 12,000 lb jack welding in between the mounting brackets. Does this come without the bolt on brackets so it can be welded where my other one will be coming out? | Since a version of the Bulldog...
Hopkins Reliance Brake Controller E1 Message on a 2008 Chevrolet Silverado
This might be a dumb question, but I just wired up the Hopkins Reliance brake controller up on my 2008 silverado 4x4. I used a combination of instructions from this site How to wire a brake controller on a 2008 GMC/Chevrolet. The instructions...
Correct Rear Anti-Sway Bar for 1991 Class A Motorhome on Ford F53 Chassis
Is this the correct rear sway bar for 1991 Class A Motorhome on Ford F53 Chassis? | I have spoken with one of my contacts at Roadmaster, who confirmed that the Anti-Sway Bar Kit, part # RM-1139-143 that you referenced will indeed fit your Class...
Availability of Trailer Wiring Harness for a 1997 Jeep Wrangler TJ
The question is regarding the unit you are showing for a 97 Jeep Wrangler TJ. It is the same unit as the older Jeep Wranglers, but there was a major remodel in 1997 to the new TJ platform. You are showing the Code: 118409 unit as the correct...
Ball Shank Diameter, Rise, Drop, and Length of the Ball Mount that Comes with Trailer Hitch # 12240
what is the rise/ height? | The ball mount that comes with the Curt Trailer Hitch, # 12240, has a rise of 2-5/8 inches and a drop of 3-1/4 inches. Its overall length is 7-1/4 inches. It accepts a ball with a 3/4 inch diameter shank. I have...
Spacer for Firestone Air Bags on 2008 Dodge Ram 2500 With 9 Inches Between Brackets
2003-2012 Dodge Ram 2500 2wd 4wd - Ride-Rite All-in-One Air Bag Complete Kit Analog this is the kit I bought for my 08 Dodge Ram 2500 five seven I have a lift when I set the top bracket up to the bump stop and I put the bottom bracket on the...
Will Reese Weight Distribution System # RP67509 Work for a 3,680 Pound Trailer and Truck with ATV
Would you recommend the Reese #RP67509 for a 25foot 2003 Surveyor TT with a dry weight of 3680lbs and tongue weight of 325lbs? Typical cargo carried in trailer is 1000lbs. Tow vehicle is a 2008 Tundra DC 4x4 with the factory tow package. I occassionaly...
Husky Fifth Wheel Bracket Kit Recommendation for a 2008 Ford F-350 with 6-1/2 ft bed
Hello- I have a 2008 Ford F-350 6.4 6 1/2foot bed and a Husky EZ Roller 16K fifth wheel hitch that I bought with universal rails. Didnt realize I also needed a bracket kit. On the Husky website I found part # 055133 for my truck. Is #HT31408...
Trailer Hitch Recommendation for a 1998 Chevy S-10 with Stepside and Roll Pan
Im looking for a trailer hitch for a 1998 s10 stepside with the roll pan bumper or non towing bumper. Its a 2.2 4 cy LS package. Im hoping you have one that doesnt require cutting to the roll pan. Please help me if possible thanks! | The Draw-Tite...
Will the SuperSprings Leaf Springs # SSA4 Interfere with the Brake Cable on a 2008 Toyota Tundra
Will these springs interfere with the brake lines on my 2008 2wheel drive Toyota Tundra? | The SuperSprings Leaf Springs, # SSA4, will not interfere with the brake line on your 2008 Toyota Tundra if they are installed properly. SuperSprings...
Adding a 7-Way Trailer Connector to a 1998 Dodge Durango
I am thinking of purchasing part #118334 for my 1998 Dodge Durango. My truck did not come with a factory hitch, or wiring harness, but I have installed a factory hitch from a wrecked Durango of the same year. The Hitch came with the factory7/6-pin...
Will a Brake Controller Draw Enough Power When Not in Use To Drain a Car Battery
Hello! If I connect the brake controller directly to the battery, is there no risk to drain the battery? What is the stand-by current consumption? | The brake controllers available now either are only on when they are activated, or a have a...
Brake Controller Installed on 2008 Silverado Not Receiving Power
Hello, i have read over and over these directions, I have all the wires hooked up under the dash accordingly. I had the orange wire plugged into the black and red but took it out after further investigation. reading your directions. I didnt...
Solution for LED Boat Trailer Lights Hyperflashing With 2008 BMW X5
2008 BMW X5. My boat trailer was rewired with LED lights. I now have a hyperflash issue. I believe the answer is to install one ALEDRST2B on each new LED trailer light, agreed? Challenge is the boat trailer gets submerged every time I put...
Replacement Tarp for Extang Full-Tilt SL Snapless Tonneau EX38770 on 2008 Dodge Ram 2500 6-1/2-Foot
Need replace fulltilt on ram 2500 2008 slt short bed part number please h I have the recommendation to replace for 1770 and is wrong part not fit. | The complete Extang Full-Tilt SL Snapless Tonneau cover for your 2008 Dodge Ram 2500 with 6-1/2-foot...
What Gauge Wires Are Used On the Hopkins Endurance Easy-Pull Harness HM38136
What gage are the wires???? | I spoke with Hopkins and they told me the Hopkins Endurance Easy-Pull Harness part # HM38136 has a 16 gauge wire for the ground and then 18 gauge for the stop/turn and running light. The correct matching side for...
Gooseneck Hitch With Offset Ball For a 2008 Ford F-250 Super Duty Long Bed
Customer Has A 2008 Ford F250 2dr. Long Box And Needs A Ball Installed In The Bed. Was Thinking Of Using The #16055 But Need The Rails. Dont See A Direct Fit For The Truck. Can You Help Or Do I Need To Purchase The Universal Kit? | The Curt...
Correct Key for Land Rover Roof Rack with 101 Lock Core
Can you identify what key I would need on this rack? | If you have a Thule roof rack with lock core stamped 101 then the Replacement Key for Thule Racks and Carriers part # THKEYN101 will work. It looks like Thule made roof racks for Land Rover...
Will Circuit Protected Modulite Kit # C59496 Work On 2008 Infiniti EX35
Will this kit work on my 2008 Infiniti EX35? | The Circuit Protected Modulite Kit # C59496 will fit your 2008 Infiniti EX35. It will protect your vehicle and trailer against electrical shorts and mis-wire situations and will power your trailers...
Parts Needed to Install Prodigy P2 Brake Conrtoller # 90885 in 2008 Toyota Highlander
So I know that my car is equipped with the Towing Package and years ago my car dealer also installed the factory tow hitch with the 4 pin connector for me. I actually want this exact product to replace my 4 pin connector, and yes I know I need...
Replacement Control Unit for Kwikee Steps Part 094707-04-700
Step control unit. 2008 Itasca sunrise #094707-04-700 | I was able to look up part number 094707-04-700 and find the correct replacement control unit for the Kwikee steps in your motorhome. The correct part is the Replacement Control Unit...
2008 Dodge Ram Electric Brake Controller Wiring Colors and Connections.
The green wire on the truck harness where you plug your controller in, what does it go to? The dealer cut it and replaced it with the blue e brake wire. | The green wire on your truck is the brake feed circuit that powers the brakes on the...
What Parts Are Needed to Tow a 2008 Ford Ranger using Base Plate Kit # 477-5
Which tow bar would be uses to readily connect to the part #477-5? I have a 2008 Ford Ranger pickup which, Ford Motor Company says is towable has the right modl transmission. It has a standar transmission. Also, perhaps you can find a tow...
Fifth Wheel Hitch Recommendation that Fits 2008 Chevrolet Duramax 2500 with Reese Signature Rails
I have a 2008 Chevy Duramax Long bed crew cab. It has a puck system underbed 5th wheel hitch system. I need to know what hitch to buy. I measured 13inch top to bottom and 30inch side to side. I would figure 20Kplus since GVW of trailer is 17500....
Filter Your Search
Contact and Help