1998  x   >   !Glacier  x   >   Fastway  x   >   2013  x   >  

Which wdh works best for a FJ Cruiser/Geopro BH setup? I believe the Geopro tongue weight is 420, and the Fj max tongue weight is 500. Is this a viable setup with a weight distribution hitch? | The Fastway # FA92-00-0800 is designed for vehicles...

I recently installed this on my half ton chevy pickup. I took all the measurements and got my truck front and back down to non load height. I am still experiencing sway when vehicles pass. Especially at 60mph and higher. Any advice on adjustments?...

Can the trailer valet TV5X be easily removed from trailer when not in use? Will the mounting brackets interfere with load equalizing bars on the trailer? | Yes, you can completely remove the Trailer Valet 5X Swivel Jack and Trailer Mover # STC-V211...

I have the 10,000 Fastway hitch with square 1000 bars. My camper has a 505 unloaded hitch weight. A loaded may hit 600. It rides rough. Will your Replacement Trunnion Spring Bars for Fastway e2 Weight Distribution Systems - Qty 2 - 800 lbs...

I have 2013 chevy 2500 with a class V 2-1/2 receiver tube. interested in your DTALBM6625-3S. I want to know how the balls are attached to the main part of hitch. | The Diversi-Tech Self-Locking Adjustable Aluminum Ball Mount, part # DTALBM6625-3S,...

question about a load leveling hitch. I have a 2015 Ford F-250 and just purchased a 33foot heartland wilderness travel trailer with dry weight of 6780 lb I told them i have been researching the load hitches and I wanted the good Equlizer hitch...

To fit a Sundance 221RB ulta lite trailer 4725 dry and 7430 gvwr. Pulling with 2013 F150 Supercrew 5.4 liter, 3.73 gears, 6.5foot bed. Thanks | If you have the travel trailer loaded to the maximum, your likely as-towed tongue weight will be...

Towing this trailer with older Reese equalizer hitch with 600lb bars and friction sway control which worked flawlessly on my duramax 2500. Getting a lot of extra movement between avalanche and trailer. Friction sway tightened as tight as possible,...

Expert Jon G responded: The Fastway e2 weight distribution WD 8,000 lb and 10,000 lb systems do use the same head units so you can easily use the 1,000 lb Trunnion Bars # FA92-01-1099 or 2 of the Rounds Bar # FA94-02-1099 with your current setup...

I have a 2013 Ford f-350 Non Dually and I have to tow a Large Cigarette Boat 44foot on the triple axle Myco trailer. The total weight of the boat and trailer is 14000lbs and we will be towing this load a great distance and will need to have...

Looking for a weight distribution hitch for Toyota Sienna Se. With cl III hitch. Towing camper trailer 2900 lb 250lb tongue. | I would be happy to help you find the correct weight distribution hitch for your 2013 Toyota Sienna with a Class III...

Need help with the weight bearing bars bottoming out Airstream dealer installed to see if system on July 2013 Ford Explorer to tow a 2016 airstream 22 foot trailer We are unable to go over small speed bumps or into smalls Waze without...

Question about the Fastway e2 Weight Distribution w/ 2-Point Sway control. I have been using this hitch for some time now and there is one thing that I dont understand. The holes on the adjustable L brackets are a bit smaller than the studs...

Hello, I have a 2013 Toyota Sequoia SR5 and an 7x14 Interstate Loadrunner tandem axle. Im going to be making some cross country trips with some pretty heavy loads one way and unloaded on the way back. The sequoia has a 2.5-3” lift in the front...

I have a 2013 Ram 1500 with the following actual tow capacities: Max trailer 8,600, GVWR 6,800, GAWR 3,900 FandR, GCWR 14,150. I have purchased a 2014 Forest River RV Cherokee Grey Wolf 29BH that has a dry weight of 6,784 and a max weight...

When figuring out the total tongue weight, I know to add the trailer tongue weight + weight behind the axle of the tow vehicle. Is the weight of the WDH also added into the TTW formula? | The weight of the weight distribution system does not...

I have a 2013 dodge Durango and am looking to pull a 4400# trailer with about 800# tongue weight front deck with ATV causing excess tongue weight. Should I get a weight distribution hitch based on trailer weight or tongue weight? Durango is...

Hello, 1 Can you confirm Im with specs for the following setup? 2013 Tundra, Double Cab 4x4, 5.7L with 4.30 differential, 6.5 ft bed Max towing capacity =9700 lbs GCWR =16,000 GVWR = 6900-7200 Curb wt = 5625 lbs. Travel Trailer havent purchased...

Looking for suggestions for hitch, weight distribution and brake control to use on 13 Toyota Highlander limited awd Towing 3500lbs fleetwood hybrid camper 23-27 ft Thank you for your recommendations | I would be happy to make some suggestions...

Do they make any of these with the 2 1/2 inch shank so you dont need the adapter? I think the adapter will be cause for more rattling. | I spoke with my contact at Diversi-Tech about the adjustable ball-mounts that fit a 2-1/2 inch receiver...

Hi there. Just bought a 2013 Toyota Tundra Crewmax 2WD 5.7L Engine with the Factory Installed Tow Package its the Short Bed. How important is tongue weight? And would a Weight Distribution and Anti-Sway bar allow me more tongue weight? ...

I bought a 2013 highlander specifically to tow a camper. It has the tow package and is rated to tow 5000 lbs. I have read that a WD hitch should not be used on a unibody tow vehicle like the highlander. My highlander squats 3 inches with...

What size bolts hold the shank? | The bolts that hold the head to the shank for the Fastway e2 Weight Distribution w/ 2-Point Sway Control # FA92-00-0600 are 3/4-10 x 5” Grade 5 Bolts. If you're asking about the size of the hitch pin then that...

DOSE E2 FA92-00-0800 WILL BE GOOD FOR THIS TRAILER -DRY WEIGHT IS 6200 POUNDS GROS WEIGHT 7500 POUNDS. ANY SUGESTIONS . | The best way to pick out a weight distribution system is to base it off of the loaded tongue weight of the setup when...