Search: brake line fitting   >   Lubricants Sealants Adhesives   >  

Hey Cory, so we don't have a longer version of the hose that comes with the lockout solenoid part #TK71-755-00 that you referenced but it's basically a brake hose so what I would do is take the hose with you to a car parts store and…

We do have some options for replacing the Knott calipers and rotors on your Coyote Boat Trailer. We really do not have any info or specs on the Knott brand brakes, but since it is all for a 3,500 lb axle the sizing should be standard. Standard…

The #DX39FR Replacement Inner Member for Dexter DX7.5L Actuator - Single Axle w/ Disc - 2" Ball is what you need. This is the replacement inner member for Dexter DX7.5L and Legacy UFP Brake Actuators like your UFP A-60 so it would be exactly the…

The bracket you described is closest to the CE Smith Double U-Bolt Bolster Bracket - Galvanized Steel - 8-3/4" Tall - Qty 1 #CE10190GA. The CE Smith Bolster Bracket - Aluminum - 8" Tall - Qty 1 #CE10100A40 is similar and also corrosion…

I would be happy to answer your question about the #315-FXI Smooth Ride Transom Saver - 31" to 40" Long - Aluminum and Stainless Steel. According to my contact at Jif Marine, the insertion shaft is the only stainless steel component. I have…

It looks like you have 3,500lb Dexter axles; while we do not have torsion axles exactly like that, we have another option that may work for you. If you don't need any lift or drop, which it looks like you don't, then I would look into the…

Most people will put the brakes on the front axle of a tandem axle trailer or the front two axles of a triple axle trailer. This is what I recommend doing if you are not wanting to install brakes on all of the axles. For the most effective braking…

The replacement reverse lock out you are looking for is the part #TK71-755-00. This would allow you to use the same adapters and fittings you have now.

We do have what you need to replace the UFP HD-1377-10 hub and drum as well as add hydraulic brakes for your boat trailer. Here are the exact parts you will need: - Dexter Trailer Hub and Drum Assembly #84546UC3 - Hydraulic Trailer Brake Kit -…

I have actually linked a video that will help you with the process of bleeding disc trailer brakes. Go to about the 9:40 mark of the video. It is basically the same as bleeding drum brakes: make sure the actuator is full of fluid, move the actuator…

We do have a brake line kit that will meet your needs for a 16 foot run and 8 foot width runs. I recommend the Kodiak Hydraulic Brake Line Kit - Tandem Axle - 18', #18TA-BLKIT. This is a flexible brake line kit, so the excess line can have slack…

If you installed your Titan Solenoid Valve #T4748800 downstream of your master cylinder for reasons of space it will still operate properly according to my contact at Titan. It does however need to be oriented in one specific direction. The brake…