Search: Anti Sway Bars   >   Automotive Tools   >  

The 214-1231-A61-06 solenoid actually replaced your older 214-1231-A11-06, so the correct replacement for your 06 Keystone Montana Mountaineer is the Lippert Polarity Reversing Solenoid by Trombetta for Hydraulic Power Units #LC118246.

It does look like you are missing a wire connection on your solenoid. I attached a picture that shows a wire lead ran to the same terminal you just have rans with that copper bar. I believe that's the missing connection you need to make.

With weight distribution systems you can't really make tight turns while backing up. What we recommend is that if you are basically backing up in a straight line you can leave the spring bars on the system. But if you think you will end up…

There is a weight distribution hitch option for your new 2021 Intech Flyer Discover with a completely covered A-frame. Instead of using a standard weight distribution hitch which has brackets that go around the frame you will need to use a weight…

I recommend the MORryde Suspension Upgrade Kit #MR46ZR for your 2021 Grand Design Imagine XLS 22RBE, as it includes all new wet bolts, bronze bushings, nuts, and shackle straps to replace your current bolts and straps. This will save you from having…

If you are talking about a pole tongue trailer then there are adapters available, item #RP3280 and item #RP58393, that you can use to connect to the frame and then attach the brackets. The RP3280 will not work with the Reese SC Weight Distribution…

If the rear end of your vehicle sags significantly when the trailer is hooked up then you could have an unsafe condition and your front end and tires will not wear properly. The weight is taken off of the front wheels of the vehicle and can cause…

The Brophy Rigid Mount Spare Tire Carrier #BR56VR will allow you to carry a spare tire with Wheel #TA56FR on your 4" RV Bumper. I have included an image below of a similar setup so you can see how it fits.

I have a solution for you. I confirmed with Jensen that the AC/DC Power Adapter for Jensen Television #ACDC3212 will not work with your Jensen LED RV TV - 1080P - 24" JEN46VR. The correct adapter you need is the AC/DC Power Adapter for Jensen…

Yes! The Jensen 24-inch TV model JTV24DC can be properly powered by their Power Adapter Cord #DCCIG09. I confirmed this with my contact at Jensen's distributor. This power adapter works for all of their 12V RV televisions up to and including…

I do recommend you use a weight distribution system on the Intech Explore Travel Trailer while towing with your 2018 Toyota Highlander. The reason for this is because the weight of the trailer will be over half the weight of the vehicle which is the…

Friction sway control units like the part #83660 require drilling into the frame of the trailer for installation. You would need to contact the manufacturer of your trailer to determine if they are okay with you doing that on your trailer. Most…