Search: Trailer Jack Socket   >   BMW  x   >   !Pro Series  x   >  

The tools that you will need to install this Curt Trailer Hitch Receiver with Drawbar, part # 11771 | What tools do I need to install this? Will I have to have the car lifted? What level of expertise is needed? Is there...

I have a 2016 BMW X5. Can I use the Ultra-Fab Scissor Jack 24inch lift 6500 lb to change a flat | I have a 2016 BMW X5. Can I use the Ultra-Fab Scissor Jack 24inch lift 6500 lb to change a flat tire? Stability? Contact points?...

boat trailer and a jack that has an appropriate lift height for your trailer. Typically, the tongue | I have a 2001 23foot sea fox center sole fishing boat with a 1500 cc mercury engine. Will...

The Yakima Rack and Roll trailer part # Y08106 doesn't have any safe jacking points on it so if you | My kayak is over 200 pounds. How would you recommend jacking up a loaded Rack and Roll to change a flat?...

Hello, I have a 1995 Ranger Trail trailer with a Shelby Ind model 5759 jack. My frame is 1 3/4” x 4 | Hello, I have a 1995 Ranger Trail trailer with a Shelby Ind model 5759 jack. My frame is 1 3/4” x 4”. What...

The Americana Trailer Wheel Lug Nut # AM26NR would require the use of a 3/4" socket. | 3/4"inch socket fits on what size lug nut? | The Americana Trailer Wheel Lug Nut # AM26NR would require the use of a 3/4"...

section of the install instructions for this a jack isn't even mentioned. So you'd have no problem | Can this install be performed with car on the ground? I do not have a lift. Thanks. | Yes, you can install the Curt hitch...

and an external socket to receive the trailer wire plug. No problem with the trailer hitch. I have seen | Hi, I would like to fit my 2010 BMW X5 with a traier hitch, a short circuit protection...

I am picking up a 2016 Lance 1995 this weekend and it doesnt have rear stabilizer jacks installed | I am picking up a 2016 Lance 1995 this weekend and it doesnt have rear stabilizer jacks installed by Lance. I cant locate the...

connection in bulb sockets, trailer connectors, etc. | I have a brake light that keeps on going out I take the bulb out from the back break light this bulb is in a socket when I take the bulb out of the socket...

If I install the holder on the top rail angle iron of a utility trailer, what is the weight | If I install the holder on the top rail angle iron of a utility trailer, what is the weight capacity on the holders as a cross beam...

that there is power at the socket. On your vehicle's trailer socket, the 12V power pin should be located in the 1 | Hi, thank you for the reply to the previous persons question. I was able...

What size are the nuts included in this hitch? https://www.etrailer.com/Trailer-Hitch/Curt/13077 | What size are the nuts included in this hitch? https://www.etrailer.com/Trailer-Hitch/Curt/13077.html I need to know what extension...

The tools that you need to install the Draw-Tite Max-Frame Trailer Hitch Receiver # 75600 on your | I recently just bought this for a 2018 X5 and was curious what tools and/or extra parts like rivets I need to get ahead of the...

I have a 2019 BMW x3 that I want to put a class III trailer hitch on with wiring. I need | I have a 2019 BMW x3 that I want to put a class III trailer hitch on with wiring. I need the ability to use both 4 flat and 7 round and...

. The trailer wiring we offer for the 2016 BMW X3 is a 4-pole flat type setup like # 119250KIT that carries only | Hello, I recently had a hitch installed at my dealer. I have a BMW X3, they installed the retrofit tow kit for...

Hi. Im trying to have a hitch and trailer connector installed on my 2015 BMW X5. Im thinking | Hi. Im trying to have a hitch and trailer connector installed on my 2015 BMW X5. Im thinking of going with the Draw-Tite hitch but...

There are several different 3 series models for the 2010 BMW 3 series. The Draw-Tite trailer hitch | I want to carry a single bike on my 2010 BMW 3 Series Sedan. Neither roof nor trunk racks are appealing and I already own a...

Keith, the fish wire and hardware will be included with the Curt Trailer Hitch Receiver # C13303 | Where do I get the fish wire and do you have a list of the required equipment like drill bits for this installation? | Keith,...

The EcoHitch Hidden Trailer Hitch Receiver # 306-X7277 does rate a 10 out of 10 on our difficulty | Im a terrible wrench - what tools and how much expertise is needed to install this? | The EcoHitch Hidden Trailer Hitch Receiver...

The Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" # C11412 is not a confirmed fit | Hi, I have C11412 installed on my e-Golf and want to move it to my A3 sportback fit is same Any tips for removing the hardware? Thanks...

have checked the fluid, and the shoes are adjusted. I jacked up the trailer wheels, when I depress | Hello I have a question about my surge brakes on my 2000 model boat trailer. When pulling my boat, If I...

trailer? Picture of my ball mount is attached. Or do you recommend another option for towing a pop up | The level of my hitch ball mount sits above my cars hitch. If I use the top receiver for my bike rack will I have enough...

socket. Can you recommend which mounting bracket I should pick up? | Hi there, I had purchased draw-tight hitch 75371 but I just realized I had forgotten mount bracket. The electric hitch connector kit Ill use is the one...