Availability of 2-1/2 Inch Combo Bars Shorter than 18 Inches for Hitch Fabrication
Is it neccasary to fabricate such a long reciever for bumper mount ? I will be towing small ski boat only , can combo be shortened to match other bumper mount hitch’s ? | We do have other 2-1/2 inch combo bars if you want something shorter...
Troubleshooting a Go Power Remote Display For MPPT Solar Charge Controllers That Won't Power On
My remote doesn’t power on. How do I know if the remote is bad or if there’s a problem with the solar controller or RJ12 cable? Does it have to be turned on or is it always on if plugged into the controller? Thanks. | The Bluetooth Remote...
What is the Weight of the Titan Hitch Box Extension # RP45018
Approx weight for titan hitch extension bar 48”, please | The Titan Hitch Box Extension # RP45018 weighs approximately 55 pounds. If you were to cut it down from the 48 inch length to the 41 inch length it would of course weigh less, about 47...
Parts Needed to Install Yakima Roof Rack in ARE Truck Camper Shell Tracks
I have a ARE truck cap that has the factory roof rack rails. I was told it would use Yakima parts. Looks like the rails have a Tinch slot maybe. What part fits in these rails? | I spoke to my Yakima contact and he informed me that you will need...
Are Extang Tonneau Covers only Available In Black
Is there any way to get another color on the cover other than black. ? | Hey Rick, so Extang only offers their tonneau covers like the part # EX92515 in the color black. |
What is the Width Between The Mounting Plates On The Leveling Scissor Jack # JSC-24-IND?
What is the jack dimension between the weld on mounts? | The Leveling Scissor Jack # JSC-24-IND has a width of 2-1/4" between the mounting plates. |
Availability of 2-1/2 Inch Receiver Combo Bar that is Less Than 18 Inches Long
Previously you had a shorter than 18” combo bar with 2 1/2 “ opening. Are they still available? | We do indeed have shorter 2-1/2 inch combo bars available than the 18 inch long # C49511 that you referenced. For a 12-inch-long bar you can use...
Can ST235/80R16 Tires Be Installed In Place Of 8.75r16.5LT On RV Motorhome?
Can I switch out my rv tires that are 8.75 r16.5LT 110/1060 m+s with st235/80r 16 trailer tires? | The ST235/80R16 Wheel and Tire # LHAW133 is only for trailer use. While you can use some light truck tires on a trailer, trailer tires should...
Towing Capacity for Rear Bumper of 1969 Ford F250
I need dokumentation for towling capasity , rear bumper for a Ford f 250 , 1969. | The replacement bumpers for Full-size 1969 Ford F250's that we offer are rated with a 8,000 lb. towing capacity and an 800 lb. tongue weight capacity. I've provided...
Recommended Trailer Hitch Receiver For a 1979 F-150 Lifted 9" With 38" Tires
I have a 79 f150 with an old school chrome deep bumper. It is a 10” , would you guys have a hitch that would work on the truck? Doesn’t need to be able to haul an insane amount since it’s a half ton truck with a 9in lift and 38s. | The Curt...
Recommended RV Tailgate for 1997 Ford F-250 Truck
1997 F250 heavy duty looking for a rv tail gate for it.. thanks | We have one RV tailgate that is confirmed to fit your truck. It is the Stromberg Carlson 100 Series 5th Wheel Tailgate with Open Design # VG-100. It is made of heavy duty steel...
Trailer Hitch Recommendation for 1954 Ford F-250
Hello. I am looking for a hitch to fit my 1954 F250 truck. I know you dont have any listed for that year. My frame is 34inch wide, and I need it to at least 4inch from the bottom of the frame to the top of the . 6inch would clear the bumper...
Curt Trailer Hitch Receiver # C14082 Tube Height From Mounting Flange For 1973 Ford F-100
have a 1973 ford f100 with factory chrome bumper I would like the top of hitch very very close to the bumper. what is your best part number for that unit | As we have not had a 1973 Ford F-100 in our shop to test fit the available receivers...
Does Curt Hitch # C60723 Come with All Needed Install Hardware
I was wondering if there’s anything else I will need to buy in order to install this | The Curt gooseneck hitch part # C60723 that you referenced comes with all of the needed hardware to install it in your truck. |
Filter Your Search
Contact and Help