Trailer Hub Replacement for 2017 Karavan Boat Trailer with Bearings L44649
Hello- I have a 2017 Karavan boat trailer. I would like to get a spare hub. It appears to be a simple idler hub. Rim lugs are 5x4.5. Below are my bearing and seal specs Bearings: L44649 Inner and outer Seal: 1.25 I.D. 2.00 O.D....
How To Hook Up Lights On a Flat-Bed Without Splicing
Hello, I am currently building a flatbed for my 1999 f250 7.3L Super Duty XLT and I am adding lights to the headache rack and tail lights but i do not want to cut/splice into the factory harness for the flat bed lights in the event that i go...
Wire Gauge of Wesbar 4-Pole Flat Connector With Jacketed Cable
You show the wire gauge of the W787270 10 ft cable to be 14 and the wire gauge of the W787274 14 ft to be 16. Are they really different or are they the same gauge and only differ in length? I could use a couple of extra feet, but always like...
Wesbar LED Tail Lights To Replace Old Style Sealed Capsule Tail Lights
I have the old style with the sealed capsule...what model can i get to replace the entire light in a LED...what does Wesbar have? | I recommend Wesbar LED Tail Light part # 271575 for drivers side and part # 271574 for the passenger side. They...
Solution for Connecting Vehicle With 4-Way Flat to Trailer With 4-Way Round
I have a 4pole round connector on my trailer and need an adapter to fit the 4flat on my vehicle. Thanks. | There are adapters that go from a 4-round on a vehicle to a 4-flat on a trailer but not vice-versa, but we do have a simple solution for...
Recommended Replacement Tail Lights For 2001 SlickRyder Trailer
I have a Wesbar Model 105825 trailer light driver side on a 2001 SlickRyder trailer that is burnt out. Is the 271595 a replacement unit for that older light? | The 105825 number you said is on your tail light is actually part of the number...
How to Attach a Trailer with a 3-Way Connector to a Vehicle with a 7-Way Connector
Hi, I have a 1987 lance that had an old 3 way plug for running lights and 12v battery connection. I have a 7 way plug in the bed of my truck. I am trying to figure out how to connect the 3 original wires into a new 7 way male plug. After many...
What Replacement 4-Way Plug do You Recommend to Work with My Trailer?
Hi - we are looking to replace my trailers 4 pin connector after weathering/wear. There is a strange 6 wire setup with my trailer. The 4-flat connector is coming from that whole set of wires out of the trailer. The 4-flat has eroded away and...
Do Boat Trailer Wiring Connections Need to Be Waterproof
Do the wiring connections have to be waterproof? | Ideally, you'd unplug the trailer before backing into the water but you'll be a lot happier in the long run if you'd solder your connections and use heat shrink tubing like part # DW05451 followed...
Replacement Trailer Light for Wesbar SAE-AIP2ST-DOT94 105826 Tail Light
I need a replacement cover for my left rear brake light. The part number on the lens is WESBAR SAE-AIP2ST-DOT94 105826. Can you tell me what I need to do to order it? | I have a few options that will work for you, but the Wesbar part number...
Reverse Lights On Trailer Stop Working After Switching To LED
My back lights stop working I put led lights on and they did not work | If the backup lights on your trailer have stopped working since you have installed LED then most likely your lights are not grounded properly or you have a loss of power...
Wiring Guide for Installing Lights on Trailer with 5 Wires
I have 5 wires from my trailer but only 4 on my new lights how do I connect them up | A trailer can have either 4-pole or 5-pole connectors and the number of actual wires can vary too. For instance, the part you referenced # 16-4B-1, is 4-pole...
4-Way Recommendation for Roadmaster Magnetic Tow Lights part # RM-2120 for Connect to Tow Vehicle
Im considering your p/n RM-2120 magnetic towing lights. However the picture of the 4 way flat plug shown does not look right to plug into the 4 way socket on my Ford F-350. I need a light with a 4 way flat plug that has 3 exposed male pins,...
Replacement Wishbone Style 4-Way Trailer End Plug
My 4 pin plug coming off of my boat trailer has five wires. Two of the wirea yellow. I can not find a plug that has 2 yellow wires to replace it. | Thanks for that photo and what you have is a wishbone style wiring harness, although the colors...
Replacement Trailer Lights for 2003 EZ Load Boat Trailer
Are they a replaceable bulb or do I need a new tail light | I have a solution for you, but from what I was able to find out the old Wesbar lights on your trailer cannot have the bulbs replaced on them because of the clear plastic cover and...
Is a Longer Version of Wesbar 002402 Trailer Wiring Harness Available
I need a 15 foot version of this part. Need to replace the entire wiring harness. Do you have anything like that? | Would a 20 foot harness work for you? If so, Wesbar offers a 20 foot version as part # 002220. This is not a wishbone style...
LED Tail Light Recommendation For 1999 Ranger Trail Boat Trailer
I have a 1999 Ranger Trail and its for an R71 or 17foot 8inch Ranger boat. The Trailer is less than 7ft. wide I would like to upgrade to LED for this trailer. The original tail lights use the sealed bulb and are hard to find outside of Ranger...
Parts Needed to Flat Tow a 2005 Honda CR-V
I need to purchase a base plate for towing my 2005 CR-V behind my motorhome. I have checked your online listings and need to know if the base plate includes the tow bars for attaching to the RV tow bar Falcon 2. Thanks. | The Roadmaster Base...
How Do I Connect Trailer Wiring With Wire Colors That Do Not Match and 5 Wires To 4-Way?
My new plug 4 flat has a white ground, brown, yellow, and green wire. The old trailer wire 4 flat has a green, green/brown, yellow/brown, yellow, and white. Which wires splice together? | Your trailer's 4-way wiring is what they call a wishbone...
Electric Brakes and Tail Light Wiring for Tandem Axle Trailer with Brakes on One Axle
Hello, I am trying to get info on wiring a dual axle trailer with 1 axle electric brakes. I also need to find taillights 4.5x4.5inch which fit inside of a metal surround. Do you have wiring harness kits available? | The wiring I would go...
Gauge of Wire that is Used on the Hopkins Endurance 4-Way Flat Trailer Connector # HM48110
What gauge wire is used in this piece? HM48110 Would like to use heat wraps as a splice and want to get the proper sixe | I spoke with my contact at Hopkins and they informed me that the Hopkins Endurance 4-Way Flat Trailer Connector # HM48110...
Replacement Lens Needed for Shorelander Boat Trailer Tail Light
I just need to replace a lens. Can you help me | To order replacement lens for your Shorelander boat trailer, you will want to try and locate a part number on the light housing or take a quick measurement of the light and order by size. I have...
Replacement Wesbar Taillight For Shorelander Trailer
I need a replacement taillight assembly for a sholelander trailer under 80inch wide. I need the left side complete assembly in incandescent which would also include a license plate light. The size I need would be 6 x 3-1/2 x 2-1/4. The part...
4-Way to 5-Way Adapter for a 1998 Chevy C/K Series Pickup Truck
I have a boat trailer with a 5 pin with surge brakes. I tried turning the wiring and turning my headlights on when backing up but it keeps blowing my dashboard and running light fuse. I rather just leave all plugged up. Can I buy the 4 to...
Filter Your Search
Contact and Help