Correct Pigtail for the 7- and 4-Pole Trailer Connector Socket
On the back side of 7- and 4-Pole Trailer Connector Socket w/ Mounting Bracket - Vehicle End Item # HM40975 what are the part numbers of the male plugs-ins in order to complete the connection to the electrical wires from our vehicle. This...
Anti-Sway Bar Recommendation for 2002 Chevy Workhorse W22
We are looking for sway bars for our 2002 Chevy Workhorse W22 36ft. Do you start with just the rear sway bars or do you need front and rear? Also what is your recommendation for the right sway bar for our class A? | We'll typically recommend...
Why Can't Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver Be Used with WDH
Why does the description say Draw-Tite Heavy Duty Receiver Hitch - 41990-16 is to not be used with load leveling systems? Thank you! | The Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver part # 41990-16 is not designed for use with...
Replacement Inner Tube For Gooseneck Trailer Coupler That Doesnt Use Through Pin
We recently got a new truck, its an F750 and our trailer doesnt sit level. Weve lowered the gooseneck as far as we can. I see a few Bulldog products you have that would allow me to replace the interior pipe on the hitch to give me the additional...
Is There a Replacement Side Section for an RV Ladder on a 2006 Workhorse or What Option is There
I broke the ladder rail on the back of my Class A MH. I only need 1 side can you help me with that 3/4 o/d | While we do have some replacement parts (i.e. rungs, end caps, stand-offs, etc...) for RV ladders. We do not have a complete replacement...
How Does Tightened Pivot Bolt of Roadmaster Tow Dolly Allow Movement
IF I torque the pivot bolt to 70ft/lbs and the pad is tight how will the deck swivel thank you | While the pivot bolt part # RM-350800-00 is torqued down pretty tight the wear plate that goes between the two moving pieces allows the movement. |
Anti-Sway Bar Fit For 2009 Winnebago Sunova on Workhorse W18 Chassis
I have a 2009 Winnebago sunova workhorse W18 chassis. Pulling a 2021 ranger pickup. The pickup pushes the rear end considerably around corners and in the wind. Would suspension stabilizers help. If so what kind? Thanks | The best option to stabilize...
Windshield Cover for 1973-1996 Chevrolet Class-C RV
For a windshield cover for a 1991 Chevy coachman see online you don’t go back that far in age do you offer one | We offer the Camco # CAM45233 Windshield Cover for 1973-1996 Chevrolet Class-C RVs, or the Adco # 290-2403. We have had a lot of...
Replacement Motor For Kwikee 23 Series Steps Manufactured After 1999
Need replacement motor for a 23 series motor part # 9551 01 holiday rambler admiral 36dbd | The 9551 motor for your Kwikee 23 series steps is no longer available for your 2001 Holiday Rambler. Given the year of your RV, the Motor Upgrade Kit...
Cut Out Dimensions Needed For Installing RearView Safety Flush Mount Bracket # RVS-421
There is a photo here which shows the dimensions are Overall its 7.875 inches wide and 6.125 inches tall. That appears to be the overall edge to edge dimension, what is the dimension of the box which would recess into the dash leaving the lip...
Replacement Surge Coupler for Atwood Drum Actuator
Im looking for an Atwood surge brake to replace a bad one. Dont see any on the website. Do they still make them? I have drum brakes. | The Atwood brake actuators are no longer made as Atwood got out of the industry a while back. Best solution...
How Does Brake Controller Install in 2008 Fleetwood Southwind
Hi. I have this system but want to put it on my 2008 Fleetwood southwind RV which is a class A RV. This comes with the Chevy 8.1 motor. Do you have a adapter for this type of unit? | Since your 2008 Fleetwood Southwind is built on a Workhorse...
What is the Leveling Capacity and Side to Side Leveling Operations of the Air Lift LoadLifter
I have a 2004 Workhorse w22 chassis I just installed 88101 air Springs on the front. What is the maximum amount of distance the air Springs will extend when leveling the motorhome? If I raise the right front side to level I am expanding the...
Trailer Hitch Receiver for Motorhome With 8,000 Pound Capacity
Do you carry a adjustable hitch that is 8000 lb. or have distance of bolt holes on your hitches I have a motorhome bolt holes center to center is 31 1/2 inches. Thanks | We do have some adjustable bolt-on hitches for motorhomes but they won't...
Suspension Enhancement Options for 2004 Gulf Stream Sun Voyager on Workhorse W22 Chassis
SuperSprings Custom Suspension Stabilizer and Sway Control Kit Do you have any of these that will fit my 2004 gulf stream sun voyager 8368MXG Motorhome rear suspention? | We do have a number of suspension enhancement options that are going to...
What is the Correct Steering Stabilizer for a 2002 Workhorse W22
which bracket kit do I need for a 2002 workhorse w22 ? | For the 2002 Workhorse W22 the correct Roadmaster steering stabilizer with mounting brackets is # RM-RBK13-RSSA. The mounting brackets alone are # RM-RBK13. I have included a link to our...
Trailer Wiring Harness for 2003 GMC W5500 Box Truck
I am working with a 2003 GMC W5500 box truck. I installed a Hopkins converter but have low voltage at the trailer connector. What module do you recommend? | Our Tekonsha converters like the # 119250KIT are a great option. This has a higher amperage...
Can You Replace the Lock Tumbler on the Redline Junior Locking Latch
Can I replace the lock cylinder in order to re-key it? | The lock tumbler can be replaced on the "Junior" Locking Stainless Steel Flush Door Latch # L1833. The Replacement Key and Tumbler Set for "Junior" Flush Latches # CHKT is the correct...
Universal Hitch for a 2002 GMC W4500 Forward
Will this fit a 2002 gmc w4500 forward | I have a solution for you but the Buyers Products Hitch Plate with Receiver Tube - Chevy/GMC item # 3371809065 will not fit your 2002 GMC W4500 Forward. You will need to use one of our universal hitches...
Can The 2-1/2" Hitch Receiver # BP82FR Bolt to Combination Pintle Hitch w/ 2-5/16" Ball # BP38FR?
Will these holes match up to the buyers products 15 ton combo pintlex2-5/16 ball combo hitch you sell? Thanks in advance! | The holes on the Buyer's Products Bolt-On 2-1/2" Hitch Receiver # BP82FR are spread 3-1/2" vertically and 3-3/8" horizontally....
Recommended Suspension Upgrades For A Thor Four Winds Hurricane W-Series Class A Motorhome
I have a Thor Four Winds Hurricane with a Workhorse W18 chassis and 8.1 liter V8. I struggle to find all the items I am looking for to upgrade the chassis so I dont go down the highway like a pin ball, up, down, sideways, twisting and turning. What...
Sway Bar Availability for Workhorse W-Series Motorhomes
Roadmaster Anti-Sway Bars for the 0 W-Series by Workhorse Is this item a 1259-118 or a 1259-108? Thanks | The two sway bars you referenced are designed to fit different versions of the W-Series Workhorse motorhomes. The part # RM-1259-108...
Does The Dometic Full-Timer RV Toilet DOM87FR Include Everything Needed To Install It?
What hardware comes with the DOM87FR full time toilet. What else will i need to replace the toilet i have in my motorhome. 2007 Winnebago adventure I have measured and it appears that it will fit. Thanks | The Dometic Full-Timer RV Toilet...
Front Timbren Suspension Enhancement Fits for a 2015 Ford F-650
I'm like to help the front suspension out on my 2015 F-650. What's the best fit for me? Thanks! | There are 2 options from Timbren when it comes to front suspension enhancement for your 2015 Ford F-650, and the correct kit just depends on if...
Filter Your Search
Contact and Help