!mercury  x   >   !Road Glide  x   >   !CX-50  x   >   1970  x   >  

I am looking for a 15X6 rim with a 5.5X5 bolt pattern for an old stock trailer. I can seem to find one on your site. Can you help me out? Thanks | The Vesper Steel Modular Trailer Wheel # TA37RR is the only 15" wheel we carry that have...

I also tow small trailers, as well as a 12,400lb camper. Should I get a time delay controller? | In regards to choosing an electric trailer brake controller, you have proportional and time-delayed options. The best option would be a proportional...

I have a custom truck and was looking into the #TUR350 as it is a universal fit that seems like it would work for my application. How much clearance is needed between the frame and tire for this to fit? | The Timbren Rear Suspension Enhancement...

I need a striker plate for a door that measures 3 1/4 L x 1 1/2 w Can you recomend something that will work? it is sliver and looks like fastec 6000-10 but is 1 too short. | I wish we had something that was close to what you need but I checked...

do you have correct fitting tonneau for my 70 chev el camino | As a matter of fact we do. The Craftec Hatch-Style Tonneau Cover # 252198 is confirmed to fit your 1970 Chevrolet El Camino. This tonneau cover has a light aluminum frame and gas...

Need item # and price for mount on light ILL29CB and a picture | The Opti-Brite LED RV Dome Light - 500 Lumens - Grommet Mount - 4" Round - Clear Lens # ILL29CB you were looking at gets mounted in a 4" round grommet # A45GB. This will require...

What is the diameter of the holes the cord fits through on this product. Erickson Adjustable Bungee Hooks - Qty 10 Item # EM05296-10 | The dimension you are looking for on the Erickson Adjustable Bungee Hooks - Qty 10 Item # EM05296-10 is 3/4...

do any of the jerry can holders fit a toyota fj40 spare tire mount? looks like they are only for jeeps. thanks. | I confirmed with the MORyde fit guide that the Spare Tire Mounted Jerry Can Holder for Jeep Wrangler - 5 Gallon - Tall Tray # MR99MR...

Timbren REAR kit for 1970 GMC 1/2 ton w/ leaf springs | The correct Timbren rear suspension for your 1970 GMC C-10 is Timbren Rear Suspension Enhancement System, # TGMRC10A, that you have referenced. I have included a link to the installation...

I am thinking about ordering the Redarc Tow-Pro Elite Trailer Brake Controller for my 1970 chevy c30 with hydroboost and disk brake conversion. I am looking a buying a gooseneck trailer. In the video it says it will apply the trailer brakes...

What is the jack dimension between the weld on mounts? | The Leveling Scissor Jack # JSC-24-IND has a width of 2-1/4" between the mounting plates. |

Can you provide some additional info on receiver hitch options that allow the retention of the factory spare tire location under the bed? I have the long styleside bed with standard step bumper. | Modification and/or relocation of the spare...

For a Ford C4 Automatic transmission. Which line is the return line? | The best way to determine which line on a transmission cooler is the return line from the radiator is to use the following procedure: 1. Start engine while engine is cold 2....

The side camera view at the rear of the camper are aimed 1 1/2 ft away from the back of the camper. It says they are not adjustable. Is there a shim kit that would help aim the cameras, so they so straight back along the side of the camper?...

Hello! I purchased airlift part number 60844 for my 1970 Buick Skylark. I am replacing the Buicks original springs with new front and rear coil springs and have a similar question: do the coil springs need to be removed before the airlift is...

what size tek screws do you recommend to mount these type of hangers to enclosed cargo trailers? there is a 1/4inch thick wood interior skin and then what is the size of the metal tubing behind it in a normal car hauler trailer? | The Tow-Rax...

what is the overall height of the sumo bump stops? | The overall height of the SumoSprings Solo Custom Helper Springs - Rear Axle # SSR-610-40 is 6 inches. These springs have a weight capacity of 1,000 lbs at 50-percent compression and are made...

Id like to use this hitch and want to make sure i order everything ill need to install, as well as wiring. Can you recommend which wiring system and if any mounts are needed? | The B and W Trailer hitch part # BWHDRH25122 that you referenced...

Will this fit a 1970 volkswagen bus? Does it include all mounting hardware? | The hitch you mentioned # C114121 Curt Trailer Hitch Receiver w/ Euro Drawbar comes with all hardware and is custom fit for a Volkswagen Golf ranging from 2015 - 2019...

I have an m416 trailer and would like to get your recommendation on an axle with the ability to install and use the stock cable brakes. Also, I will pull with a 1970 Toyota FJ40 Landcruiser. What wiring harness do you recommend for the vehicle?...

will this fit a 1970 ford f250 4x4 thanks | The B&W Trailer Hitch # BWHDRH25122 is a confirmed fit for a 1970 Ford F-250 pickup with a standard or step bumper, regardless of if it is a 4WD or 2WD, and is designed to allow fits for both 34...

Hi, Do you carry a trailer hitch set up for a 1970 chevy chevelle? It would be nice to tow a small trailer. Thanks! | Although we do not have a custom fit hitch available for your 1970 Chevrolet Chevelle, I have a hitch that should work for...

Can you tell me what the measurement is from the bottom of the vehicle frame to the top of the cross tube and from the bottom of the frame to the top of the receiver tube? Seeing if this will work on my 1963 Dodge D100. | The Curt Trailer Hitch...

What does the small plate that came in the assembly box go? We are having trouble understanding the instructions that came in the box. Thank you | I spoke to my contact at Westin and he informed me that the smaller plates you are referring...