Adapter to Allow Stihl 800 Magnum to Fit on Pack'Em Rack for Open Utility Trailers
PK-6-OP1 on this part, i have an 800 still magnum blower. what attachment do i need | I looked up your Stihl 800 Magnum and to carry it with the Pack'Em # PK-6-OP1 you'd want to use the # RA-STIHL. |
Can Rack Em Ladder Racks be Shortened
Is the following part able to be cut shorter to use for only 1 ladder? I can only fit 28inch on my truck. Overall Length of PackEm Ladder Rack for Exterior Side Wall of Enclosed Trailer # PK-28WL2-BM If not do you sell a shorter one for one...
Vertical Spacing Dimensions Of Pack'em Utility Trailer Trimmer Rack # PK-6
What is the vertical spacing between each trimmer slot? | I have included a picture with the vertical distances for you to see. The overall height of the Pack'em Trimmer Rack # PK-6 is 46". It is capable of holding 3 trimmers with a trimmer...
Ladder Rack With Higher Transport Height than Pack'Em Ladder Rack or Extensions
I am needing the ladders to be higher than what is shown in the customer picks. I need them to be above the trailer out of the way. Is there any way to extend these to achieve that? | The Pack'Em Ladder Rack for Side Rail of Open Air Trailer...
Hardware Needed to Install Pack 'Em PK-6 Utility Trailer String Trimmer Rack
What bolt length is recommended for these? And should I get washers or lock washers? | The length of mounting hardware needed for the Pack 'Em # PK-6 trimmer rak will be completely dependent on how and to what you mount the racks. Using 3/8...
Which Mounting Hardware for Pack 'em PK-6 Trimmer Rack
What bolt length is recommended for these? And should I get washers or lock washers? | The length of mounting hardware needed for the Pack 'Em # PK-6 trimmer rak will depend on how and to what you mount the racks. Using 3/8 inch grade 8 bolts,...
Where is the Stake Pocket Tie-Down Anchors # PK-SPTD Manufactured?
Where are the PK-SPTD unis manufactured? What country? | The Stake Pocket Tie-Down Anchors # PK-SPTD are is manufactured in China. If you are looking for an option that is manufactured in the U.S., I recommend the Brophy Stake Pocket Tie Down...
Can the Pack'em Ladder Rack PK-28WL2-BMH Accommodate Two Large Ladders?
Can the ladder rack carry a Gorrila 23 Ft Ladder and also the little giant ladder? | The Pack'em Ladder Rack for Side Rail of Utility Trailer - 2 Ladder # PK-28WL2-BMH should have absolutely no issues holding the Little Giant Ladder as well...
Can a Pack'em Expansion Pack be Installed on an Open Trailer with 4 Foot Tall Sides
I have an open trailer with 4 foot sides. Is there a way to attach the expansion pack to the 4 foot sides? thanks | The Expansion Pack # PK-OP1 is designed to be used with a trimmer rack, # PK-6, or tower kit # PK-BM so you would first need...
Are Erickson ATV E-Track Tie-Down Kit # EM09160 and Pack'Em Wheel Tie-Down Kit # PK-WTD Compatible
Will They work on the Packem Wheel Tie Down Kit? PK-WTD | Both the Erickson ATV E-Track Tie-Down Kit # EM09160 and Pack'Em Wheel Tie-Down Kit # PK-WTD use standard size E-Track connections so the straps from one will work with the chocks from...
Stake Pocket D-Ring Anchors For 2"x4" Stakes Or 3" Tapered Stake Pockets
Will the anchors fit into this pocket, since the pocket is tapered? | For the Rack'em Heavy Duty Stake Pocket # PK-BSP you will need to use a stake pocket anchor that is specifically designed to work with the 3" tapered pocket. The Stake Pocket...
Can Pack'Em Rack for Open Utility Trailers Be Welded To Trailer When Installing
for your item PK-6-OP1, It states not made for welding. Since it is made out of metal, can we still weld it on? | I spoke with my contact at Pack Em about the Rack for Open Utility Trailers, part # PK-6-OP1. They told me that the manufacturer...
Distance Between Mounting Holes of Pack'Em Ladder Rack for Exterior Side Wall PK-28WL2-BM
How far apart are the holes I have to bolt to the trailer, bc I have shelves built in my trailer and I need to know if Ill be able to use these. | I attached a picture that shows the distance between the mounting holes of the uprights that come...
Can Pack'Em Trimmer Rack # PK-6 Be Installed On Pipe Frame Trailer
Is there a trimmer rack that will mount to a pipe top trailer | Our contact at Pack'Em has advised us that the trimmer rack # PK-6 can be mounted on a trailer with a tubular frame. The mounting hardware is not included. You could either drill...
Additional Blower Rack with Pack'Em Rack for Open Utility Trailers
Hello, I am currently interested in purchasing the PackEm Rack for open utility trailers. I noticed it comes with a holder for 1 blower and 1 cooler. Would it be possible to switch out the cooler holder for another blower holder? I have 2 blowers...
Is Pack'Em Wheel Tie-Down Kit For One Or Two Wheels
this says one kit is it for one wheel or two wheels | The Pack'Em Wheel Tie-Down Kit for Transporting Machines w/ Wheels, part # PK-WTD is designed to secure one tire in place on a truck bed or deck. |
E-Track Mounted Wheel Strap for Securing Vehicle to Trailer
Do you have a wheel stop like the PackEm that can be used on a floor mounted E-Track? | Sounds like you are looking for something like the Erickson Adjustable Wheel Net part # 77314 which attaches to a section of E-track and holds a vehicle...
Tie Down Recommendation for Arctic Cat Wildcat SxS
I have a 22 ft trailer carring 2 Arctic Cat Wildcat 1000. Their weight is 1000 to 1100 each. Which is the better system to go with for strapping them down? Because of suspension in them they tend to move around. They have 29inch tires. | Going...
Blower Rack Adapter Recommendation for the Pack'Em Rack for Open Utility Trailers with a Stihl BR450
Do I need an adapter for a Stihl BR 450 C-EF for the blower rack on the combo trimmer, blower, cooler, string rack? | Yes, you would still need to use the Stihl Adapter part # RA-STIHL with your Stihl BR450 C with the Pack'Em Rack for Open Utility...
Can Pack Em Rack # PK-BM-OP1 Carry Husqvarna Blower and Fit Tube Frame
Will this rack mount on tube rail trailers? Also, will a Husqvarna backpack blower fit in rack, model350BF | The Pack'Em Rack # PK-BM-OP1 has not been fitted for compatibility with your specific Husqvarna backpack blower 350BF according to the...
Blower Pack Rack Availability and Dimensions
Can I get an extra backpack blower hook added? How long is the rack? | For just a single blower pack rack you would want the part # RA-4. The Rack Em Backpack Blower Rack measures 41-3/8 inches tall, and 19-3/8 inches wide. Measuring from the...
How Many Pack Em Wheel Straps Are Required for Securing ATV
Looking to purchase the PackEm Wheel Tie-Down Kit for Transporting my ATV Sportsman 850. I am wondering how many you recommend? If two, do you recommend both back tires? One front and one back? Is 4 overkill? | The recommendation for the Pack'Em...
Is There a Removable Shovel Holder for Open Utility Trailers
Is there a setup similar to the 2 trimmer rack with the removable stallions for the shovel rack? Can you buy the stallions and then add the cross racks to hold the shovels so you can remove the rack just like the trimmer rack? | The only type...
Trailer Rack Recommendations To Hold 6 Trimmers
I need a rack not expensive, for at least six trimmers to be mounted on the bed of a truck, do you carry such a rack? | If you have an open trailer, the trimmer rack i recommend is the Pack'Em Trimmer Rack for Open Utility Trailers, part # PK-6....
Filter Your Search
Contact and Help