A-Frame Trailer Jacks that Have Highest Lift Ability
I have a 1972 Prowler trailer. We have moved the axle to under the springs to give the black water and gray water tanks more clearance on the trails and hills of course the axle still clears the same. This has improved the entry and departure...
How Short Can the Drop Leg on the Ultimate Trailer Jack Be Made
How low can I the tongue on my trailer with the Ultimate Trailer Jack - A-Frame Item # 322-RDJ-2K With the caster installed - My current one does not get low enough to get my Chalet A frame in the garage without removing the castor and using...
What Top Wind Jack that you Offer has the Shortest Retracted Bracket Height
Im looking for a top wind A frame trailer jack. What is the shortest retracted length is that you have? | The Ultimate Trailer Jack part # 322-RDJ-2K has a retracted height of just 1-3/4" it has by far the shortest retracted length of any of...
Can Ultimate A-Frame Trailer Jack 322-RDJ-2K Be Completely Removed from Collar Assembly
When installed will the jack slide completely out of the collar? I ask because I have a Jeep Wrangler and rear gate clearance is an issue when pulling my utility trailer. Thx | Yes, the Ultimate A-Frame Trailer Jack # 322-RDJ-2K uses a separate...
Is 2,000 lb Ultimate A-Frame Trailer Jack Available with Sidewind Handle
Because of a storage box mounted on my trailer I can not use a top wind does this ultimate jack have a sidewind version? Did not see one but wanted to be ask just to be sure. Thanks, | We do have 2,000 lb sidewind A-Frame trailer jacks but...
Recommendation of A-Frame Trailer Coupler for use with TJDA-5000S
I would like to buy an A frame jack and coupler together. Will TJDA-5000S leg jack fit Demco A-Frame Trailer Coupler - Standard Coupler - DM14793-52? | I do have a couple solutions for you but the Square A-Frame Jack # TJDA-5000S is not compatible...
Replacement Electric A-Frame Trailer Jack
do you have an electric jack that fits this triangular pattern? It doesntfoot have to be rated very high weight capacity | The triangular pattern you see on the # 322-RDJ-2K and your trailer is pretty standard for A-frame trailers. For an electric...
Recommended Manual and Electric A-Frame Jacks for a Snowmobile Trailer
I have a 2008 Wells Cargo silver sport 29’ v nose snowmobile trailer rated at 7000 # gross. I need an A-frame jack. What do you recommend, both manual and electric? Thank you | The best option for an electric A-Frame jack is going to be the...
Can Tube of Ultimate Trailer Jack 322-RDJ-2K Be Completely Removed
If a thief removes the pin, would they be able to steal your jack tube? Thieves steal anything not secured around here. | With the right tools and enough time a determined thief can steal almost anything. This is true for the inner tube of...
Shortest Retracted Height Trailer Jack
I have a very light trailer I put my 14 foot Jon boat on and move it about with my 4 wheeler. I have found that, often times, the jacks dont come down far enough to easily hook up the ball to the hitch. Do you have a jack that would have a small...
Needing High Ground Clearance 2000 lb Trailer Jack
I have a subaru which I use to tow a small fiberglass trailer 13’. The ground clearance when going over some dips and humps sometimes scrapes the jack post. Is there a jack with a lower portion, say maybe 6”. I see this one is 9”. On my...
Do All A-Frame Trailer jacks have the Same Mounting Hole Pattern
Im replacing the a frame Jack on my trailer. Some give the mounting hole distances and some dont. Is there a standard? | Yes, about 99 percent of A-frame jacks use the same mounting pattern. The holes are generally 3 inches apart on center...
Wheel Caster to be Used with Ultimate Trailer Jack
What wheel do you recommend for the ultimate trailer jack? Thanks | The wheel caster you need is the part # JC-102 to be used with the Ultimate Trailer Jack # 322-RDJ-2K. |
Recommended Bolt-On A-Frame Jack With Short Retracted Bracket Height
Can you recommend a bolt-on A-Frame jack with a short retracted bracket height? Looking for max road clearance - use of extended footplate or block is OK if necessary. 14 - cargo trailer 3000# GROSS 2x4 frame rails #BD1550100317? | For a jack...
Side Wind Bolt-On Trailer Jack for Trailer with Limited Ground Clearance
Do you have jack with the same functionality, but as a sidewinder? | I do have an option for you but I am not aware or any side mount trailer jacks similar to the Ultimate Trailer Jack part # 322-RDJ-2K in regards to how the mounting bracket...
Solutions to Allow Tailgate to Fold Down on Truck Without Hitting Trailer Jack
Hi. I’m trying to find a trailer jack that will have enough clearance to put tailgate of truck down with trailer attached. The ultimate jack looks like a great option bu not sure I have enough clearance behind for the pin. Can you advise if...
What is Shortest Bracket Height Trailer Jack with Caster Wheel
Hi. I need a trailer jack. Its for a cement mixer. the tongue of the cement mixer is very low to the ground. I have a jack on another nixer and works well. But that tongue is higher up from the ground. I need a trailer jack with a 6” wheel...
Will Ultimate Trailer Jack Fit My Specific Trailer
What specifics about my trailer should I consider to be sure that the bolts will line up and that generally this jack will fit my trailer? I own a 2020 Nucamp Tab 400 teardrop camper. | All A-Frame mounted jacks like the Ultimate Trailer Jack,...
Trailer Jack Recommendation with Best Under Trailer Ground Clearance
Looking for a replacement trailer jack with footplate for a vintage Shasta Compact camper. Goal is to have as little exposed when retracted as possible. Any recommendations?? Thanks! | I have a great solution for you. The Ultimate Trailer...
Recommended A-Frame Trailer Jack for Applications with Limited Ground Clearance
What is the shortest bolt-on a-frame jack you have from the bottom of the mounting plate to the bottom of the extendable leg when retracted? My current jack is too long and often hits the ground when towing. Can be light duty, 2000lbs or less....
Lowest-Profile A-Frame Trailer Jack For Tailgate Clearance
Is there be a lower profile jack option? One that can be operated with a cordless drill or impact would be nice. My electric jack extends about 22" above the top of the trailer frame, 12-14" would be ideal. | Hi Robert, So there isn't one that...
Can You Open Liftgate On 2015 GMC Yukon XL With Electric Trailer Jack Installed
I am looking for an electric tongue jack for my 2015 Gulfstream Innsbruck Travel Trailer. I have a 2015 GMC Yukon XL for towing. The jack head needs to be small enough so I can have clearance to lift the back liftgate. Do you have anything for...
Troubleshooting Ultimate Trailer Jack 322-RDJ-2K That Wont Slide Up or Down
I installed the jack, then went to pull it up, and it wont move. It is stuck with the center part that is supposed to lift up stuck in the lowest position. I have the handle pulled and resting in the position that should allow the jack to slide...
Determining Height of Pro Series A-Frame Jack # PSEA20000103 for Tailgate Clearance
You have stated that the height of the PSEA20000103 from where it bolts to A-frame to top of jack is 11. Does this include the handle, which is generally about an added 2? I have a 2008 Toyota Tundra and the tailgate hits the top of my existing...
Filter Your Search
Contact and Help