Are There 4.80R12 Tires With Powder Coated Wheels Available
looking for wheel/tire combo but could not find it on the web site. Help please. 4.8 X 12 radial on 5 X 4.5 wheel prefer powder coated but if only galvanized is okay too. Need 3 wheel/tires plus 1 spare tire tongue mount for that size wheel...
Timbren Spacers For A 1987 GMC Pickup With A 2-1/2" Lift
So I have a 2 1/2inch lift kit on my 1987 one ton GMC. are ther any adatoptor brackets / spacers? I have a 10 inch distance from the top of existing bump stop rubber to top of axle. | Yes, there are spacers that can be used with the Timbren...
Recommended 5th Wheel Rail Kit for a 1996 Chevy 3500HD Cab and Chassis
Hi Im looking for a hitch that would allow me to tow both gooseneck and 5th wheel trailers. Something like a rail kit with both attachments. I need it for a 1996 Chevy 3500HD commercial chassis. There is no bed on this truck, just a bare frame....
Does etrailer Bolt-On Swivel Mounting Plate Fit Jack TJP-5001S-B
Will Item # e52JR fit see photo | Hey there Gary, thanks for the photo and yes the etrailer Bolt-On Swivel Mounting Plate for 3,500-lb Trailer Jacks with a 5/8" Swivel Pin # e52JR will indeed work with your Round, Pipe Mount Swivel Jack # TJP-5001S-B....
Will B&W Turnoverball Underbed Gooseneck Trailer Hitch Fit a 1996 Chevy C/K3500 Dually
Hi, I was looking online at BandW hitch kit BWGNRK10000 and wanted to confirm it will work on a 1996 Chevy Extended Cab 3500 Dually with 8ft bed. Wasn’t sure if frames were different on a dually truck. Will this kit work? Thanks | The B&W...
Recommended Hellwig Rear Anti-Sway Bar For A 1998 Chevy K2500
which hellwig anti-sway bar is going to fit a 1998 K2500 CP6 8600GVW option aka staggered shocks one shock forward of axle, one shock rear facing axle and 5K Air Lift Airbag installation? Have a 2500Lb Truck camper installation and in/out of...
Pop & Lock Tailgate Lock For A 1993 GMC Sierra 1500
what popandlock for tailgate fits my 1993 gmc serria 1500 | We have the correct Pop & Lock Tailgate Lock confirmed to fit your 1993 GMC Sierra 1500! Depending on if you have the Crew Cab with 8 foot bed or if you do not have the crew cab with...
Westin Fey Diamond Step Rear Bumper For a 1977 Chevrolet C/K Fleetside Pickup
I would like to buy a Diamond Step bumper for a 77-Chev Fleetside Pickup that measures 74in long and 7 or 7 1/4 in high. The one I found when entering my info shows a 64-in wide bumper. 71000 Do you sell one that will fit that is 74 inch...
Replacement Trailer Wheel that Can Fit Tire Size 7.00-15LT
I have a 40 year old trailer that I’m trying to make road worthy again. It has 15” wheels with a 5 on 5.5 bolt pattern. They are studs and not lug nuts. I need to replace 2 out of the 6 wheels triple axle trailer and am having a hard time finding...
Is There a Dual Hitch Receiver With 6-8 Inches of Drop and More Than 500LB Tongue Weight Capacity?
Do you have a dual hitch with 6-8 drop with a tongue weight of 500lbs or better? | You will need one of our Gen-Y stacked receivers to have multiple receivers capable of more than 500lbs of tongue weight. The Gen-Y Rebel X Ball Mount # GY39VR...
Will B&W Companion Fifth Wheel Slider Hitch Fit in 1994 Chevrolet K2500 Short Bed
I need to know for sure that BWRVK3400-5W will fit my pickup. It is a 1994 Chevrolet K2500 4x4 extended cab short bed THANK YOU If this thing weighs 277 pounds how in the world does a person ever remove it? | In order for the B&W Companion...
Recommended Underbed Gooseneck Hitch for a 1993 Chevrolet C/K Series Truck
will this kit fit on a 1993 chevy 1 ton? | I have a solution for you but the Curt item # C60652 will not fit your 1993 Chevrolet C/K Series truck. Instead you will want the Curt Double Lock, Flip and Store Underbed Gooseneck Hitch w/ Installation...
Do You Offer The Bulldog Winch Combo Ratcheting Tie-Down Strap Individually?
can you buy one of these straps individually? if so whats the part number? | We do offer the Bulldog Winch Combo Ratcheting Tie-Down Strap # BDW20229 separate from the Kit # BDW20230. |
Nerf Bars for 1987 Chevrolet K20 With Saddle Tanks
I have a 1987 Chevy regular cab three-quarter ton four-wheel-drive pick up I believe it’s a K 20 . Will the 3”nerf bars #AA204038 fit my truck. A lot of steps and runningboards won’t fit due to the saddle tanks. Please advise. | I can help you...
Will Draw-Tite Hitch Fit 1991 Chevy K3500 Dually Long Bed With Extended Cab and Cowboy Bumper
Hello, I have a 1991 chevy k3500 dually ext cab with a long bed. This truck is NOT dual exhaust and the measurement from outside-to-outsode of frame rails is 37inch from Inside-to-inside of frame rails is 32inch I have a cowboy bumper but its...
Comparing Lippert Equa-Flex Cushioned Equalizers # LC279688 and # LC145546
Are Equa-Flex Cushioned Equalizers LC279688 and LC145546 the same other than hardware being included in the LC145546 kit? Why 4 bolts as opposed to 2 for the upper pivots or 6 for all 3 corners? | The Equa-Flex Cushioned Equalizers # LC145546...
Parts Needed To Install a 7-Way with a Brake Controller On a 1998 Chevrolet K1500 Pickup
Hello! I have a 98 K1500 and want to add a towing harness to it so I can properly tow. I have seen where there is a harness to tap into the existing brake lights and turn it into a 4 pin adapter, but I want it to have trailer brakes from a...
Will Curt Hitch Fit 1986 Chevy Short Bed Pickup
Hi I am looking at the 13028 for a 1986 Chevy pickup short bed. It says it will match but the holes dont really line up on the mounting bracket. Can you check me on this before I order? Thanks | The Curt # 13028 is designed to fit the 1981 -...
Recommended Hitch for a 1987 Chevy C/K Pickup w/ a Step Bumper
I am looking for a hitch for a 1987 Silverado. I have a step bumper. I am wanting a 2" receiver hitch. What do you offer for that? thanks | Since your 1987 Chevy C/K Pickup has the step bumper, you will want the etrailer Hitch item # e88AR....
Will etrailer Hitch # e88AR Fit 1982 C10 Short Bed Step Side
I want to just make sure I get the right hitch I have a 1982 chevy c10 6 foot bed step side | The etrailer hitch part # e88AR that you referenced is a confirmed fit for your 1982 C10 6 foot bed step side bed and would be a great option. |
2000 Chevy C3500 Brake Controller Recommendation
Hi guys, I have a 2000 c3500 old body style and Im looking for a electric brake controller. Im not sure what to look for under the dash or the rear of the truck. Can you point me in the right direction as to what to look for and which controller...
Trailer Hitch Receiver and Wiring Harness For a 1972 Chevrolet K-20 Pickup With Step Bumper
i have a step bumper on my 1972 k-20 so i will need 1 that will clear my bumper !! | I do see that a deepdrop rear step bumper was offered on your 1972 Chevrolet K-20 pickup. If this is what you have the Curt 3-Piece Trailer Hitch Receiver...
Timbren Rear Suspension Enhancement System Item # TGMRTTK30 Overall Height
Of course this mounts under the frame but, What is the resting height from top to bottom of mounting purch and Timbren combined? | The overall height of the Timbren Rear Suspension Enhancement System # TGMRTTK30 is 7-1/8 inches. |
Extang Cover for 1997 Chevrolet C/K Series Pick-Up & Potential Replacement Tarp
I have an extang cover that was installed on my 1997 Chevy truck about 17 years ago and want to replace it. The one I have does not use snaps. It uses plastic that pulls tight and snaps into the rails . It also has 3 cross supports that snap...
Filter Your Search
Contact and Help