Will Draw-Tite Hitch Fit 1991 Chevy K3500 Dually Long Bed With Extended Cab and Cowboy Bumper  

The drop of the B & W Class V #BWHDRH25198 is 7-3/8 inches. That represents the distance from the underside of the frame member where the hitch mounts to the top of the receiver tube. If that isn't sufficient to clear your bumper, the Curt…

According to my contacts at Curt Manufacturing, if the spare tire on your 1991 GMC pickup is the stock size, the spare tire might need to be slightly repositioned toward the front of the truck. This is a simple process. Remove spare, and install…

For a 1998 Chevrolet K Series 3500 Pickup, I recommend the Draw-Tite Ultra Frame Trailer Hitch Receiver Class IV - 2" #41901. This is an extremely sturdy hitch that is easy to install. It will fit a standard or step bumper. For a roll-pan…

Yes, it does. The Hellwig EZ-550 Helper Springs item #HE72FR installs directly above your 2018 Toyota Tacoma's leaf springs. You will not need to modify anything.

Yes, the B&W Heavy-Duty Trailer Hitch Receiver part #BWHDRH25124 is a confirmed fit for your 1992 Chevrolet C/K Series Pickup as long as you have a factory rear bumper. Depending on your intended uses for the trailer hitch receiver, I recommend…

Based on your information, I recommend the Draw-Tite Class IV Ultra Frame Hitch, Item #41901, which is a confirmed fit for your 1997 Chevrolet C/K Series Pickup with standard bumper. This hitch is specially designed for heavy-duty towing with a…

The Curt #41901 will fit if your truck has a long (8 foot) bed and doesn't have a roll pan bumper. If you have a short bed truck, the Curt #C14081 will work unless you have a roll pan bumper. If your spare tire is on a wheel larger than an 18…

From the top of the mounting plates to the top of the B&W Heavy-Duty Trailer Hitch Receiver #BWHDRH25124 receiver is a 5-1/4" drop and then from the rearmost bolt hole to the end of the receiver is 10-7/8" (see attached).

Chances are the 1995 GMC C3500 did not come with a factory tow package, so you will have to hardwire the vehicle if you want to use any brake controller. It is not as difficult as it sounds. You will need a few things first. You will need the Brake…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…