8-Lug Spoke 16 Inch Aluminum Wheel For 5th Wheel Trailer
I am looking for spoked eight hole 16” aluminum rim for 2011 open range 5th wheel | We do have one option for a 16 inch aluminum trailer wheel with 8 lugs (and 8 on 6-1/2" bolt pattern) that has a spoked design, which is the following: - Aluminum...
What E-Bike Carrier Do You Recommend For 2013 Itasca Navion iQ Motorhome And A Toyota 4Runner
Mark S answered my previous question but a follow- up, please. I think the Yakima will be too heavy for me to move between my vehicles. Is there a lighter weight carrier available? Maybe Saris Superclamp HD which I think is out of stock everywhere??...
Is there a Maximum Ceiling Height for the Thule MultiLift Cargo Lift and Storage System
My garage has 13foot ceilings because I have an auto lift. Im trying to find out if this hoist will work with my ceiling height. I didnt see anywhere that this was mentioned. | I checked with Thule and the max length from the mounting surface...
Bike Rack for E-Bikes With Fenders & Step-Through Frame on Motorhome
I am trying to make the right decision regarding a back rack for our 2 Blix Vika folding bikes. Our RV has a rear slide out so I would like a rack that tilts. The videos I see for Swagman or KUAT racks show the locking system attaching to...
Converter For Motorhome With Separate Turn/Brake Signals to Combined Towed Vehicle Signals
I have a 2008 Navion IQ on a 2007 Sprinter Chassis with the Winnebago installed 6 pin round trailer adapter, which has separate circuits for turn signals and brakes. I want to convert this for a tow vehicle with 4 pins. Do you have a solution...
Tongue Weight Capacity for Pintle Hook part # C48004
I saw an expert say that the rated tongue weight of a Pintle hitch is 1/4 the total GWR. 5000 LBS Is there a class of hitch that can handle that kind of tongue weight? | For the applications that we normally deal with we don't have a trailer...
How to Pick Out Replacement Bearings and Seal for a Camper Trailer Hub
Do you know what wheel bearing and grease seals are need for a 2002 Coleman Cheyenne popup camper? Thanks, | To pick out bearings for a trailer hub you will need to remove one of the hubs so that you can remove the bearings and get the numbers...
Recommended Roof Rack And Kayak Carrier For 2015 Chrysler Town And Country
Have a 2015 Chrylser TandC with factory stow and place roof rack. The crossbars are low and seem low quality. Im hauling 2 kayaks and my Malone staxpro2 does not fit factory crossbars. Got anything better and more durable that will screw...
What Vehicles Does the Curt Hitch part # 13364 Fit
what years do the trailer hitch for a 2013 town and country fit | The Curt Hitch part # 13364 that has been confirmed to fit your 2013 Chrysler Town and Country fits the following vehicles: 2012 - 2014 Dodge CV 2012 - 2015 Ram CV 2008 - 2015...
Hitch Pin Hole to Bumper Dimension for Curt Hitch part # C12264
on a chrysler 2014 town and country with stow and go, what is the clearance from the center of the hitch hole or pin hole to clear the bumper for a bike rack? For a Curt 1.25inch trailer hitch | The distance from the center of the hitch pin...
Will the Gustafson RV Puck Light - 4-1/2" # 277-000344 Fit My 2013 Itasca Navion IQ
Need 41/4 wide base overall 41/2 metal with 3 screw holes it is 11/4 depth. Can you help? | I spoke to my contact at LaSalle Bristol and he confirmed the Gustafson RV Puck Light - 4-1/2" - Recessed - 4 Watt # 277-000344 will be a replacement...
Will Dexter Nev-R-Adjust Electric Brake Assemblies # 23-468 & # 23-469 Work w/ Axeltek Brake Drums
My existing rig has a 3500lb axle with Axletek brakes. The Axeltek drums are 10inch dia x 2.25 wide. Can I replace the Axeltek manual adjusting brakes with the Dexter never adjust and utilize the existing Axeltek brake drums. The existing drums...
E-Bike Carrier For 2013 Itasca Navion iQ Motorhome And A Toyota 4Runner
Can the Door County model be used with a small motorhome as well as an SUV? I will be moving the carrier between two vehicles, a 4Runner and a 25.5’ Itasca Navion. I love that it is on wheels - how high must it be lifted to install on a different...
Installation Sockets Needed for 2016 Chrysler Town and Country Draw-Tite Trailer Hitch Installation
2:42 on video What is the socket size for the 3 bolts holding the exhaust system? 4:45 on video When tightening the 5 bolts on the hitch, what is the correct torque setting? 75579 Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit -...
Recommended Hitch Mounted Bike Rack for 2006 Chrysler Town and Country
Is there a 3 bike rack to fit my vehicle that doesnt have the upper arm with foam protector go on the window ??! 2006 Chrysler town and country | All of the trunk mounted 3 bike racks for your 2006 Chrysler Town and Country will have an upper...
Kwikee Steps On Itasca Navion IQ Will Not Stop Once Retracted
2009 Itasca Navion IQ Two problems noted on my last RV trip. First symptom, steps didnt always auto retract. Second, step motor continues to run when the steps are fully retracted after closing the door. I assume its the controller. On...
50mm Ball and Getting Lights to Work on Altera Strada DL3 Bike Rack on 2016 Chrysler Town & Country
I have brought to the US my beloved Atera Strada DL3 bike rack and need a Euro-style ball mount 50mm - 1 7/8 to fit a 2 trailer hitch receiver. I am not sure though what lift I will need. Please advise. ALSO - if you can suggest the best...
Filter Your Search
Contact and Help