Replacement Bearings and Grease Seal for 7,000 Pound Lippert Axle
Please provide the correct part numbers needed to replace wheel axles bearings, seals on my 2021 Forest River Sabre 5th wheel. Axle information is: Lippert 7000lb axle Item # V000164415. Cust Part # LCI70-S8-85-68.5-NOSP-OS-L-86517-7227-30PT...
Recommended Backup and Observation Camera System for Forest River Sabre and Add-on LED Strip Lights
I have a 2019 Forest River Sabre rear bunkhouse I want to add flat LED lighting to it. I would like the LED to be underneath on the frame one sides, and under the gutter on top. I am looking for dimmable wireless control and 12V. I want to...
Trailair Air Ride 5th Wheel Pin Box For A Lippert 1116 Pin Box On A2019 Forest River Sabre 5th Wheel
I would like to replace my pin box with a Trailair Air Ride. currently a Road Armor is mounted. with the imprinted # 420591, As well as the Lippert item Number 719506. what do I need to pay attention to. Regarts Robi | Sure thing and thanks...
What E-Bike Carrier Do You Recommend For 2013 Itasca Navion iQ Motorhome And A Toyota 4Runner
Mark S answered my previous question but a follow- up, please. I think the Yakima will be too heavy for me to move between my vehicles. Is there a lighter weight carrier available? Maybe Saris Superclamp HD which I think is out of stock everywhere??...
What Type of Plug is on Trailer Pre-Wired for Furrion Camera System
my 2020 forest river sabre 5th wheel has the sharkfin for the camera but the cable coming out of the camper dont match the furrion camera, the one on the camera is a male plug. what camera do i need to plug n play for my camper? | In regards...
Troubleshooting Signal Issues With A Furrion Vision S RV Camera System
Put Furrion 7inch Backup Cameras on my forest river Sabre and works in the truck next to monitor but when I mount it, light comes on but cant get it to pick up. Went close to rear with truck but still no signal. Any ideas? | If there's ever...
Is MORryde or Rota-Flex a Better 1621 Pin Box Replacement?
Trying to decide Moryyde or roto flex to replace 1621 I tow with a 6.4 bed so don’t want to lose any clearance or get the rv closer to the tow vehicle Any thoughts on what one | Hey Donald, thanks for reaching out! I recommend using the MORryde...
Hitch Solution for 2019 Forest River Sabre
I have a 2019 Forest River Sabre and am wanting to put a reciever hitch on the back to carry a yakup. Could you tell me which hitch I need please. Thanks you | For campers like your 2019 Forest River Sabre the best hitch option is the Curt #...
Picking Out Replacement Leaf Springs for 2008 Palomino Sabre
I have a 2008 palomino sabre, the leaf springs broke on passenger side, do I need to replace all springs as I have not done any, but not really travel far with it basically living in it. And how do I know what kind and size I need? | You do...
Determining Replacement Leaf Springs For a 5TH Wheel Camper Trailer With 12,000LB GVWR
I have a fifthwheel trailer with a 12000 gvwr, my questions are 1. What leaf springs do I need and 2. Is there any difference in a length of 251/8 and 251/4. | I have linked an article below which will help you to accurately measure your leaf...
Could Lippert RV Storage Bin LC236558 Fit 2020 Iconic Toy Hauler
Helo, I have 2020 iconic toy hauler and wanted to purchase the lippert storage boxes underneath and my toy hauler is 102 inches the the frame on underneath is 76 inches center to center so I would have to modify the storage frame to fit | The...
5th Wheel to Gooseneck For 2022 Forest River Sabre Cobalt 5th Wheel With Lippert 1621 Pin Box
Will this fit a 2022 forest river cobalt 36bhq and if not is there an adapter. Pin box is a Lippert 1621. | Thanks so much for that info, and yes, because your 2022 Forest River Sabre Cobalt 36BHQ has a Lippert 1621 pin box, the Gen-Y Hitch...
Converter For Motorhome With Separate Turn/Brake Signals to Combined Towed Vehicle Signals
I have a 2008 Navion IQ on a 2007 Sprinter Chassis with the Winnebago installed 6 pin round trailer adapter, which has separate circuits for turn signals and brakes. I want to convert this for a tow vehicle with 4 pins. Do you have a solution...
What Rota-Flex Pin Box do You Recommend to Replace my 1621HD Model from Lippert Components
I have a Grand Design Momentum 320G with a GW of 17+K lbs... It has the Lippert 1621HD kingpin, and i would like to replace it to reduce chucking, etc.... I am using the pullrite superlite hitch system and wondering if the Rota-Flex would be...
Recommended Storage Cover for 2020 Forest River Sabre Fifth Wheel
We have a Forrest river 37 ft saber-front living room fifth wheel and are looking for a good cover. We live in Florida so it gets a lot of sun and heavy rain. What would be the best cover | I recommend the Camco UltraGuard 5th Wheel Cover, #...
Does Dexter Heavy-Duty Suspension Kit for Tandem-Axle Trailers Fit Specific Trailers
Will it fit my 2019 Sabre fifth wheel | The Dexter Heavy-Duty Suspension Kit for Tandem-Axle Trailers # K71-359-00 is not designed to work with any specific trailer and we have no way to verify any type of fitment though it is very likely to...
Will Stromberg Carlson Landing Gear LG-3 Fit RLTS Sabre by Palomino
I have a 2011 31 RLTS-6 Sabre by Palamino 5th wheel. My front landing gear needs replaced. The dry weight is 9800lb Gross weight is 13,800lb. Will your LG-3 6500lb landing gear work properly for this? | Yes, the Stromberg Carlson landing gear...
Are Shocks Required for the Roadmaster Comfort Ride Leaf Spring Suspension Kit
Can you purchase this without the shocks? | The Roadmaster Comfort Ride Leaf Spring Suspension Kit - Tandem 7K Trailer Axles part # RM-2460-2570 comes with shock absorbers as they are required for this suspension system in order to work properly....
Will Tire Size ST235/80R16 Fit on Demco Spare Tire Carrier # DM15851-76
I have a 2017 Forest River Sabre 30RLT with 4x4 rear bumper. My spare is ST235/80R16 will it fit on this mount attached to my 4x4 bumper. I am concerned about the height of the mount and the depth of the bolt support not being enough for the...
How To Find Replacement Leaf Springs for a Palomino Sabre 5th Wheel 12,800 GVWR
I need to replace leaf springs, double eye measure center of eyes is 25 1/2 inches, also need u bolts and plates round, where can I find axle weight says gvw is 12800 pounds | In order to find the correct replacement leaf spring for a trailer...
What Are the Torque Specs for Trailer Suspension Parts
On the leaf spring suspension how tight should all the bolts be torgued to? Hanger, u bolts and others | I have attached for you below some common torque values needed for a trailer suspension system but a lot of these will vary by bolt size...
Recommended Replacement For The AC In A 2016 Forest River Sabre 5th Wheel Trailer
I need to replace my exsiting AC unit in my 2016 Forest River Sabre 5th wheel whats up there now is Dometic Brisk II, 15k BTU 9105304475, has separte thermostat What would you recommend, sure dont want to buy wrong one to much to return ......
B&W Companion & Tow Ready Base Rail Lock for 5th Wheel Trailer Hitches
Is there a recommended saddle pin lock available? I assume only one would be needed. I realize this has to be a structural piece so I don’t t want to guess, but want to deter theft. | There is a wide selection available but no one item that...
Determining If Road Armor Shock Absorbing Equalizers LC696740 Fit 2021 Forest River Sabre 5th Wheel
I have a 2021 Forest River Sabre 36BHQ GVWR is 14,400. I am wanting to know if this road armor will work for it and what other kit if any do I need to purchase if the Item # LC696740 will install correctly on the fifth wheel that I have stated...
Filter Your Search
Contact and Help