Recommended Option to Carry Bikes and Skis on 2008 Land Rover LR2 HSE
I am looking for a better way to haul my bikes and ski/snowboard equipment around. The bikes are a bigger deal to me, but I might be open to something different if it would allow me to also haul my skis and or snowboard during the winter. I...
Distance Between Hitch Pin Hole and Rear Bumper When # C13052 is Installed on 2011 Land Rover LR2
hello, i plan to purchase the referenced hitch from you for my LR2 and also want to buy a folding cargo basket, but am not sure I will be able to fold it up. Can you tell me what the dimension is from the center of the pin to the rear face...
How to Fit a Bike Rack for a 2 inch Hitch Receiver on My 2013 Land Rover LR2 with a 1-1/4 inch Hitch
Im looking for a 1.25inch to 2inch adapter for a class II hitch on my 2013 Land Rover LR2. I need this to accommodate my bike rack, which requires a 2inch receiver. Unfortunately, I cannot find an adapter that fits. The problems is that I need...
E-Bike Rack for Mercedes Sprinter Motorhome Carrying Carbon Frame Bike
I need a 2” hitch mount bike rack to fit our Airstream/Mercedes Sprinter motor home. We will carry 2 bikes, my husbands Trek mountain bike, and my Trek e-bike with carbon fiber frame. My e-bike only weighs about 33# w/o battery. I don’t really...
Parts Needed to Install 7-Way Trailer Connector on 2008 Land Rover LR2
Hi, I would like to know what wire to buy to install on my Land Rover LR2 2008. Your finder tool tells me to get a 4-way flat connector, but the trailer I want to connect is a 7-way connector. Do you sell 7-way connectors for the LR2? | To install...
Is the European Style to 4 way Flat 118710 Considered a 12N connector
Hello, Im looking at your item number 118710. Is the 7 pin European connection it uses the same as a 12N 7 pin connection? | Yes. The Trailer Connector Adapter for Land Rover - 7-Way, Round Pin, European Style to 4-Way Flat # 118710 is considered...
Distance From Hitch Pin Hole to Sleeve of Hitch Extender e68YR
What is the distance from the hitch side hole to the sleeve? | The distance from the hitch pin hole to the sleeve is 2 inches for the Trailer Hitch Extender for 1-1/4" Trailer Hitch Receivers - 7" Long # e68YR. |
Solution for Lippert Ground Control 6 Point Control Panel that Won't Power On
2021 Montana Legacy 3871FL Keypad will not light up and touchpad not working. Hydraulic leveling at 6 jacks. Hydraulic pump works with slides What could cause this problem? | Since your key pad isn't working it would be time to replace it....
Tucson Directlink Brake Controller is Fully Functional but the Display Screen is Not Working
I got a 2008 Airstream Interstate on a Freightliner chassis. It already has a Tucaon Direclink brake controller installed. When hooked up to a trailer, the controller activates the trailers brakes, but the screen on the controller wont come...
Adding a 7-Way Trailer Connector and Brake Controller to a 2008 Land Rover LR2
Im curious about what mods to make to my 08 Land Rover LR2 to get an electric brake hookup to work. Our LR2 came with a 4 prong wiring harness and we have been told that to hook up a 7 prong requires splicing and that the splicing will set...
Can Dexter Electric Over Hydraulic Actuator be Used with 2012 GMC Sierra
Will this actuator E/H 1600 work with a 2012 GMC | Hey Bob, the Dexter electric over hydraulic brake actuator part # K71-651 can be used with the integrated brake controller of a 2012 GMC Sierra but you would need to use the adapter part # DX35FR. |
Availability of 13-Pin to 4-Pin Adapter for a 2008 Land Rover Configured for European Standards
Hello, I have a 2008 Land Rover LR2 with a standard European 13-pin trailer light hook-up. Now back in the states, Id like to get a 13 to 4-pin adapter without having to do a complete rewire. Is there such an adapter out there? Thanks!...
Troubleshooting Dexter Brake Actuator that Runs All the Time When Connected
When I test the K71-651 and connect the white wire to the negative post and the black wire to the positive post I cannot hear a click and the unit does not run. When testing the other wires everything is good. When I hook all wires up unit...
Recommended Roof Cross Bars for a 2007 Land Rover LR2 SE
Looking for black rill guard and roof for 2007 Land Rover LR2, SE | While we do not have any grille guards that will work with your 2007 Land Rover LR2, we do have a wide variety of roof racks that'll work great. If your vehicle has a slick...
Recommended Cover for 22' Jayco Travel Trailer for 6 Months Storage in Connecticut
always have had a adco cover the item # 290-52242 looks good, it says for rain and snow, but to be used between trips. well i am covering it for 6 months threw the winter, is it ok for that length of time, this is not short term, i like that...
Recommended Trailer Hitch And Trailer Wiring For 2008 Land Rover LR2
can i use euro ball mount with Curt 13052-59146 Trailer Hitch | The Curt Trailer Hitch Receiver, part # C13052 is a verified as a good fit for your 2008 Land Rover. This is a Class lll hitch and it has a 2 inch receiver opening. The Euro...
Will the Thule Hitch Post Trailer Hitch Mount Bike Rack Fit a 2011 Land Rover LR2 with Curt Hitch
I have a 2011 LR2 and a Thule Hitching Post bike carrier for 2inch hitch left over from my last vehicle. Im looking to purchase the Curt 13052 trailer hitch and am wondering if this setup will be compatible with the proper clearance? Thanks...
Difference Between Rhino-Rack # RR67GR and Leg Kit # RRRLKVA for 2008 Land Rover LR2
Whats the difference between this model for $ and the one shown higher up on page #JA2134 that just has 2500 series and lists for $? Im equipping a Land Rover 2008 LR-2 with smooth roof has sunroof but no factory mounted rails at all. Intending...
Great 4-Bike Rack for Electric Bikes on a Motorhome
I had a hard time finding many 4 bike racks that work on motor home. The Swagman S64FR might work but I have two questions ... First: The weight limit says 45 lbs. I have two ebikes at 50 lbs each and two other bikes at 35 each .... will...
Trailer Hitch and Wiring Recommendation for 2012 Land Rover LR2
I want to install a trailer hitch on my 2012 LR2 Land Rover. My questions are as follows: What hitch will work best as a bolt on where I dont have to cut the rear bumper? What electricial unit do you recommend for this vehicle. Keep in mind...
Recommended SnapPad Xtra for 9" Feet on Airstream Trailer Leveling System
I would like to order 4 SnapPad xtra 9inch. Can you confirm which version I need to purchase off your website that will fit my RV? | You were on the right track! The SnapPad Xtra 4 pack of 9" pads can be found with part # SP54FR4, the same...
Will the Furrion Chill RV Air Conditioner Fit a 14-1/4 x 14-1/4 Opening
Will the furrion chill 15.00btu fit in a 14inch 1/4 in opening? | Yes, the Furrion Chill HE RV Air Conditioner System - Manual - 15,000 Btu - White # FR92PR will fit a 14-1/4" x 14-1/4" opening as that is the industry standard opening size for...
Parts Needed to Install a Brake Controller in a 2015 Land Rover LR2 with 4-Way
Hello, Do you have instruction on installing brake controller and 7 pin connector on recent year Land Rover LR2? I have a 2015 model with factory 4 pin connector. However my camper requires brake controller. Thank you | From there you would...
Will Curt 4-Way Trailer Connector Work With 2009 Land Rover LR2?
I have read that this vehicle cannot be wired for towing because it has a CAN network protocol to transmit signals. Does this kit work on my 2009 Land Rover LR2. Do I need it programmed by a Dealer? Thank you for any assistance. | The Curt Powered...
Filter Your Search
Contact and Help