Replacement Vinyl Cover for TruXedo Lo Pro QT Tonneau Cover TX559101 for 2004 Ford F-350 Short Box
I have a 2004 ford f350 short box and I am looking for a replacment cover for a truxedo lo pro cover. Would you please let me know if one is available. Thank you | The TruXedo Lo Pro QT tonneau cover that fits your 2004 Ford F-350 short box...
Fifth Wheel Hitch Recommendation for a Flat Bed Truck to Use Sidewinder
trying to figure out best hitch combination to tow 36ft. raptor toy hauler with CM short flat bed with recessed ball need to get as much offset or setback as I can get . was thinking of replacing king box with a sidewinder #st400-sw19k because...
Recommended Brackets to Insall Reese Fifth Wheel Trailer Hitch in 2004 Ford SuperDuty Short Bed
I have Reese rails and hitch but wonder the best bracket to use to make the install easiest? Thanks | The Reese Quick-Install Custom Bracket Kit # RP50082 are the correct brackets for your 2004 Ford Super Duty. These are custom fit for your...
Recommended Hitch for 1998 Toyota 4Runner
Hello i have a customer that is looking to put a front mount on his 1998 4 runner is this 65041 going to work on that vehicle i have been having a very hard time finding one found the warn front receiver but customer does not want to pay that...
Does the B&W Patriot 18K # BWRVK3270 Fit on the 2016-2017 Ford F-250
I have question about the B and W Patriot 18,000 lb. fifth wheel hitch #BWRVK3270. I have the 16K entry level Reese slider hitch, will the B and W fit my rails, also in a year or year and a half we want to upgrade to 2016 or 2017 F-250 can...
Fifth Wheel Gooseneck 7-Way Recommendation for a 2008 Ford F-250
I have a 2008 F250 short bed. Im looking for a wiring harness for a gooseneck trailer that my factory 7 pin plug will still work with the gooseneck wiring? So I would like for both plug 7 pins to still work. Thank You | For...
Replacement Velcro Strips for a TruXedo Tonneau Cover on a 2008 Ford F-250
2008 Ford F250 with an 8 ft box and a Tuxedo cover The velcro strips on my cover now are about 1-5/16 inches wide and it moves around in the track but this one says it is 1-1/4 inches wide. My concern is that the new one will not be wide enough...
Placement of a Fifth Wheel Hitch and Recommended Base Rails for a 2007 Ford F-350 Super Duty
I own a 2007 ford f-350 super duty two wheel drive truck and tow a 35foot fifth wheel camper. My truck has a removable reese hitch. The hitch brackets were installed with support brackets between the rails/ bed of the truck and the frame rails...
What is the Thread Pitch for 2 Inch Hitch Ball # 19258
What is the thread pitch/size of trailer balls with a 3/4inch shank? | If you are buying a new ball such as # 19258 then its thread pitch doesn't matter because it comes with a compatible nut. This ball has 16 threads per inch which is about...
Is there an Adapter to Fit a Hitch Ball with 1 Inch Diameter Shank in a 1-1/4 Ball Hole
I have a weight distributing hitch with a 1 1/4 hole and a 2 5/16 ball with a 1inch shank. Is there a spacer/adapter available to convert or do I have to buy a new ball? | All you will need is a mushing # 58184 that will allow you to use the...
Brake Controller and Installation for a 2014 Toyota 4Runner
The wiring adapter that came with my 4Runner has a green headlamp switch to vehicle tail lamps and a green-yellow wire vehicle stop lamp switch to brake controller input. There are no corresponding wires on the universal wiring harness did...
Will a Yakima SkyBox 16 Fit the Rhino-Rack Storage Rack for Kayak or Cargo Box - Wall Mount - RRRWHL
Will a Yakima SkyBox 16 fit on a Rhino-Rack Storage Rack For Cargo Boxes # RRRWHL | I checked the specs on the Yakima SkyBox 16 and it looks like it has an overall height of 15 inches so it will fit the Rhino-Rack Storage Rack for Kayak or...
Trailer Wiring Recommendations for Ford Super Duty Truck Late Model
We have several late model Super Duties that didnt come w/ a frame mounted receptacle. I watched the video installation of part # 20119. It appears to be what we need. But we also need an adaptor that fits into that part #20119 and adapts to...
Determining What Replacement Pin Box Will Fit 2014 Keystone Mountaineer Fifth Wheel Trailer
I purchased 2014 Keystone Mountaineer 291RLT. Is the 5th Airborne Premium Fifth Wheel Air Ride Coupler - Extended 12-1/2inch Wide Air Ride compatible with this? Does this extended pin box provide better turning radius than without it? | We...
Can Reese Universal 5th Wheel Brackets be Used with Curt Rails on a 2001 Ford F-350
Will the universal installation kit no rails fit a 2001 Ford F-350 Super duty short bed with a Curt E16 hitch with Curt rails? | Mixing brackets and rail manufacturers is not recommended because the parts have not been tested together and it...
Universal Installation Kit Brackets Only for Curt 5th Wheel Rails on a 2001 Ford F-350
Will the universal installation kit no rails fit a 2001 Ford F-350 Super duty short bed with a Curt E16 hitch with Curt rails? | Mixing brackets and rail manufacturers is not recommended because the parts have not been tested together and it...
Underbed Brackets Only for Curt 5th Wheel Rails on a 2001 Ford F-350
Will the universal installation kit no rails fit a 2001 Ford F-350 Super duty short bed with a Curt E16 hitch with Curt rails? | Mixing brackets and rail manufacturers is not recommended because the parts have not been tested together and it...
Universal 5th Wheel Trailer Hitch Install Kit Brackets Only for Curt Rails on a 2001 Ford F-350
Will the universal installation kit no rails fit a 2001 Ford F-350 Super duty short bed with a Curt E16 hitch with Curt rails? | Mixing brackets and rail manufacturers is not recommended because the parts have not been tested together and it...
Size of the Sides on the High Country Plastics Horse Water Caddy part # SL-25
Is it 14 1/2inch on all sides? | Yes, all three corners of the High Country Plastics Horse Water Caddy part # SL-25 are 14-1/2 inches. |
Can a Vehicle Side Trailer Connector be Mounted so that it is Facing the Ground
Is there any reason why a trailer connector should not be mounted so that it faces downward toward the ground? | If the vehicle side trailer connector is pointed towards the ground then what can happen is the increased likelihood of debris and...
Is Convert-A-Ball Offset Gooseneck Adapter Required to Be Bolted to Underside of 5th Wheel King Pin
My cousin has a Convert-a-ball w/offset king pin adapter from etrailer on his trailer. He told me that the four mounting bolts holding the top plate to the king pin box was an option to install until you get the trailer home. Is it safe to travel...
Will Bulldog 2Speed Planetary Jacks Work With Gooseneck Trailer With Bulldog 12,000LB Single Speed
I have a Gooseneck trailer with dual Bulldog 12,000 LB jacks but they are not 2 speed. Will this unit still work? I notice it has a capacity of 5,500 lbs and I’m assuming that’s why you need the lower gear of the two speed but just wanted...
Will These Putco Universal-Fit Mud Flaps 6x10 inches Fit A 2011 F-350 Dually?
Would these mud flaps fit my 2011 f350 dually. | I reached out to my contact at Putco and they said as long as there is room in your wheel wells, the Putco Universal-Fit Mud Flaps - Polished Stainless Steel - 6" Wide x 10" Long, # P79472, will...
Availability of Stud Mounted Round LED Trailer Taillight
Is incandescent round red taillight with two bolt surface mount Peterson # 431800 available in LED? Thanks | Unfortunately, Peterson doesn't offer an LED version of the stud mounted # 431800 lamp you mentioned. For an LED stud mount lamp,...
Filter Your Search
Contact and Help