Suspension Enhancement For 1997 Nissan Pickup Lowered by 4 Inches
Hello, I have a lowered 97 nissan hardbody pickup. I need helper springs or air bags for the truck to help when loaded. I have 4 inch blocks in rear. Will the Timbren Jounce work? How much space is needed between frame and axle? Reading it sounds...
Trailer Wiring Harness for a 1996 Nissan Pickup Truck
I need one for a 1996 Nissan pickup. Will this one fit, or do you have one that will fit ? | Yes, we do have a T-connector style trailer wiring harness for the 1996 Nissan pickup. You will need to use # HM43505. I have included a link to the...
Is There An Air Bag Kit Available For A 1990 Toyota Pickup 4x4 With The Extended Cab
Hello do you have an air lift rear air bag system for 1990 Toyota Pickup 4x4 Extended cab? | Though I do have an alternate option, with your 1990 Toyota Pickup having the extended cab, there will not be an air bag kit available, unfortunately. With...
Is Erickson Side-Mount Truck Bed Ladder Rack Sold in Pairs
Hi, Im wondering if this purchase is for a pair or single bracket? If not a pair, then Im looking or so to buy a pair right? Thanks | The Erickson Side-Mount Truck Bed Ladder Rack # EM07708 is sold as pair. You'd get the two uprights needed...
Replacement Bumpers for a 1997 Nissan XE Club Cab Pickup Truck
Does the bumper include mounting brackets and wiring harness. Is this the correct bumper? Do not need to replace with chrome. | Westin replacement bumper # 66001-95300 is one option for your 1997 Nissan Pickup truck. It does come with a custom...
Does Westin Fey Bumper 61000-94400 Fit 1985 Toyota Long Bed
My truck is a 1985 Toyota Long Bed One ton truck. It does not have dual wheels. I do not know if the frame is any different than a regular frame 1985. I also read a review where someone said the license plate would not bolt up properly and the...
Parts Need to Flat Tow a 1989 Nissan Pickup Truck
Is it a bolt on? Is there any machining required? Is there any special requirements needed? Which tow bar do I need? Will this work pulling over a washboard road slowly? Thanks | It is possible that there could be some drilling involved when...
Do Blue Ox Base Plates for 1993 Nissan D21 Pickup Truck BX1812 Require Drilling
will a BX 1812 base plate fit my 93 D21 Nissan pickup and does it bolt in place or is there drilling envolved are the attachments included for my tow bar to connect up | The Blue Ox Base Plate Kit - Fixed Arms # BX1812 will fit your 1993 Nissan...
Wiring a Tekonsha Voyager Brake Controller in 90s 4x4 Nissan D21 Truck
Need some help wiring a Tekonsha Voyager into my 1990 D21, I dont have access to a harness adapter and the brake signal gets released at the pedal is depressed. Any help would be nice | We can definitely help you get a Tekonsha Voyager # 39510...
Parts Needed to Flat Tow 1988 Toyota Truck
Compatible Tow Bar - Will this bolt up to SmittyBilt Tow Bar Kit Part # 87450, and will it bolt up to my 1988 Toyota 4x4 pickup see pic of truck frame tow hook and side view of the frame and the back attachment hole, I know the attachment frame...
Trailer Brake Lights/Turn Signals Do Not Work After Installing Wiring Harness on 1984 Toyota Pickup
I have a 1984 toyota pickup. I bought a four way trailer plug. It has 2 turn wires a brake light wire, running light wire, and a ground to attach to my truck that goes to a box then to a four way plug. I have plug tester to plug into my truck...
Parts Needed to Upgrade to a Larger Trailer Tire
Iām looking to upgrade the tires and rims on my pop up camper and was wandering if it would be beneficial to go from 12ā to 13ā? I currently have 2 1/4 inches of clearance in both front and back of the tires and 1 1/2 on the inside of the tire...
Replacement Passenger's Side Mirror for a 1994 Toyota Pickup Truck
We purchased a reply mirror from OReileys Auto, and it didnt fit. How can I tell if this one will? The rim was too high. Hopefully the pictures will help. | The CIPA replacement mirror # CM17094 is built to factory specifications to be an OEM...
Trailer Wiring Harness for a 1994 Toyota Pickup
I have a 1994 toyota pickup base model. I also have a Tow REady Modulite protector 17499-204 which connects directly to the battery. Can I use this product with my Toyota pickup? | We have a harness that can work for your 1994 Toyota Pickup. First,...
Thule Roof Box for a 2016 Toyota 4Runner with Factory Roof Rack and Crossbars
Hello - I have a 2016 Toyota 4Runner SR5 with a factory roof rack and cross bars. I am looking at twoThule roof boxes The Force XXL and Motion XT and am wondering if these will fit on the factory cross bars while still allowing me to fully open...
Recommended Replacement Rear Bumper For A 1991 Toyota Pickup
You were going to check on a dimension of a rear step bumper for a 1991 Toyota pickup. The mounting plates should be about 40 inches apart because that is the width of the truck frame. Thanks. | According to Westin-Fey's fitment guide the...
Air Bag Helper Springs for a Lowered 1992 Toyota Pickup with 8.5 Inches Between Springs and Frame
What would be the best air bag suspension for my truck if it has a 3 inch lowering block and it is at exactly at 8.5 inches from the top of the leaf spring to the bottom of the frame? | Air Lift SlamAir kit # AL59102 is the one you will want...
Replacement Bumper for a 1986 Nissan Pickup Manufactured After 1986.5
Will this bumper fit the 86.5 Nissan hardbody? | Both of the Westin Fey Replacement Bumpers offered for your Nissan Pickup will work for vehicles manufactured after mid year 1986. Part # 76001-95300 is the chrome Surestep Bumper, and part #...
How to Get Replacement Hitch Hardware For Draw-Tite 75186 Class III Hitch
I am looking for an installation kit for a Draw Tite Trailer Hitch Model 75186. I think the kit of parts has a Manufacturers Number of F75186. Do you have these and if so, how much are they? Is there likely to be a distributor or other source...
Can a 1991 Toyota Pickup Be Flat Towed or Will a Vehicle Dolly Be Required
I have a 1991 toyota 4by4 PU, with a 5 speed standard transmission. Would I just put it in nutreal while towing. | Typically vehicles that are equipped with a manual transmission can be flat towed without using a vehicle dolly, however there...
Troubleshooting Trailer Wiring that Doesnt Function After Install on 1987 Nissan Truck
I purchased a wiring kit for my 1987 Nissan pickup and removed the driver sidw rear tail light grounded white wire mounted the converter and pluged wires in ran green wire across to other side and pluged in I only have tail lights on trailer...
What Is The Diameter Of Flange On Camco RV Drain Hose # CAM37420
Wondering what the diameter is of the actual outside flange. I am hoping it will cover an existing hole | I have attached a photo of the Camco RV Drain Hose, part # CAM37420 for you. This drain hose features a Polypropylene trap on one end...
What Size Circuit Breaker is Needed to Install the Prodigy P3 # 90195 on a 1989 Toyota Pickup
Which breaker do I need to install for this controller? I am installing on a 1989 yes that is 1989 Toyota Pickup 4WD with a 5 Speed standard trans. I am going to tow a 2017 Airstream Yea I get it quite a mismatch but the Pickup is rated to...
Can Flex a Lite Fan FLX236 Install on Vehicle that Had Manual Fan
can this electric fan be hooked up a the 1989 pickup that does not have a electric fan already? | Yes you can install the Flex a Lite fan # FLX236 on a 1989 Toyota Pickup but you'll also need a wiring kit/thermostat part # FLX31149 and you'd...
Filter Your Search
Contact and Help